电镀层

实验表明：采用所给定的电镀工艺条件，可获得金刚石含量为9%～11%的优质复合电镀层。

The experiment has shown that the 9 % ~ 12 % diamond compound plating layer is attained .

产品如要电焊时请采用毛坯的产品进行作业，避免高温烧坏电镀层。

The product such as to when welding use blank product operation , avoid high temperature burned plating layer .

复合电镀层中SiC粒子与Ni之间的高温界面反应

High temperature interfacial reaction between granular SiC and Ni in a composite plating

Ni-纳米TiO2复合电镀层的制备与性能研究

Study on the Preparation and Properties of Ni-Nano-TiO_2 Electrodeposited Coating

铝合金上Ni-Co-P/Si3N4复合电镀层的制备与性能研究

Study on Fabrication and Performance of Ni-Co-P / Si_3N_4 Electroplated Composite Coating on Al Alloys

Fe-P非晶态合金电镀层性能研究

Research on the performance of amorphous Fe - P Alloy Films

结果表明，与纯镍镀层相比，Ni-纳米TiO2复合电镀层的硬度可提高90~190HV；

It was found that the hardness of the Ni / nano-TiO_ 2 composite coating was increased by 90 ~ 190 HV as compared with the electroplated nickel coating .

研究了铸钢基体上先后沉积Ni-P化学镀层和Zn-Ni电镀层的交替叠层膜在5%NaCl溶液中的耐蚀性能。

This study investigates a Zn-Ni / Ni-P multilayer system to increase the corrosion resistance of cast steel in 5 % NaCl solution .

热处理对Ni-P-SiC复合电镀层组织结构和耐磨性的影响

The Influence of Heat Treatment On the Structure and Wear Resistance of Electroplating Ni-P-SiC Composite Coating

总结了铀及铀合金的防腐蚀电镀层，包括Ni镀层、Ni+Zn双重镀层、ZnNi合金镀层；介绍这些镀层的制备工艺；

The corrosion - resistant electrodeposits for uranium and uranium alloys were summarized , including Ni , Ni + Zn , Zn - Ni alloy electro - deposits , and the processes to prepare these coatings were introduced .

一次雷暴冷出流中新生强脉冲风暴的分析A3钢水性体系镍铝复合脉冲电镀层的高温防护性能

Case Analysis of a Severe Pulse Thunderstorm Triggered in the Outflow of the Previous Thunderstorms High-Temperature Corrosion Resistance of Electroplated Ni-Al Composite Coating Prepared on Mild Carbon Steel from a Water-Based System

Ni-P-WC复合电镀层的研究

A Study on Electroplating Ni-P-WC Composite Coating

SEM及X射线衍射实验发现，LaCl3的添加，使Ni-Co-PTFE复合电镀层的晶粒明显细化，晶粒小而球化，结构紧密，PTFE分布均匀，从而大大提高镀层的润滑及磨损性能。

Experiments of SEM and X-ray diffraction show that LaCl_3 addition makes the grains of crystal evidently fine and structure of the coating compact and the distribution of PTFE uniform , and these greatly improve the lubricating and wear performance of the composite coating .

GB/T9799-1997金属覆盖层钢铁上的锌电镀层

Metallic coatings & Electroplated coatings of zinc on iron or steel

钨电镀液和电镀层中钨的分光光度法测定

A Spectrophotometric Determination of Tungsten in Electroplating Solution and Electroplated Layer

镍基萤光颜料彩色复合电镀层的研究

Study of colour composite plating with nickel base and fluorescent pigment

影响镍-铬合金电镀层中铬含量的因素

Influencing Factors on Cr Content in Ni - Cr Deposit

铁电镀层的织构电镀层吸氢问题

Texture of Iron Plated Layer On Hydrogen Absorption of Electrodeposit

电镀层质量参数在线测量技术研究

A Study of On-line Measurement of Parameters Concerning Electrodeposit Quality

电镀层厚度对软磁材料性能影响的研究

The effects of electroplate thickness on the properties of soft magnetic substrate

多孔性镍基石墨复合电镀层的摩擦学特性研究

Study on the Tribological Characteristics of Porous Ni-Graphite Composite Coating

GB/T12600-1990金属覆盖层塑料上铜+镍+铬电镀层

Metallic coatings-Electroplated coatings of copper plus nickel plus chromium on plastics materials

Ni/SiO2复合电镀层高温氧化性能的研究

Research on the High Temperature Oxidation Resistance of Ni / SiO_2 Composite Deposite

铀及铀合金的防腐蚀电镀层研究进展

Progress in corrosion-resistant electrodeposits for uranium and uranium alloys

锌基合金电镀层由于具有优良的耐蚀性而受到人们的关注。

Zinc based alloy electrodeposits have been emphasized for their excellent corrosion resistance .

铜及不锈钢基材上锡/锡-铅合金电镀层的退除

Removal of Sn or Sn-Pb Alloy Coatings off Copper or Stainless Steel Substrate

合金元素对Fe&P非晶志合金电镀层性能的影响

Effect of an alloying on the performances of Electrodeposited amorphous Fe-P alloy films

Ni-ZrO2纳米复合电镀层的制备及其耐蚀性研究

Preparation of ni-zro_2 nano-composite Electrodeposits and its corrosion resistance

锌铁合金电镀层中铁含量影响因素的研究

Influence on Fe content of Zn-Fe Alloy Electrodeposits

GB/T17462-1998金属覆盖层锡&镍合金电镀层

Metallic coatings & Electroplated coatings of tin-nickel alloys