电镀铬

抗蚀渗氮取代电镀铬的工艺试验及应用

Process tests and application of corrosion resistant nitrogen case-hardening to replace chrome plating

通过分析和试验，我们采用了抗蚀渗氮取代电镀铬工艺。

Through analysis and tests , the authors selected corrosion resistant nitrogen case-hardening process to replace chrome plating .

该方法应用于实际样品电镀铬液及其废液中Cr（Ⅵ）含量的测定，结果满意。

The method has been applied to the determination of chromium (ⅵ) in the Cr plating solution and wastewater with satisfied result .

将传统的化学处理法与絮凝技术相结合，配制选择性好的RSL复合絮凝剂对电镀铬废液进行净化处理、纯化等，得到纯度较高的Cr（VI）液；

Combinating the traditional chemical method with chemical flocculation technology , we found a new complex flocculation to treat the electroplating chromium wastewater .

电镀铬液铬酐含量的电位分析

Electrometric analysis of the chromium trioxide concentration in the cr-electroplating solution

稳恒磁场对电镀铬的影响

An Influence of the Stational Magnetic Field on the Chromium Electroplating

电镀铬加入稀土添加剂的比较研究

Comparing and Analysing the Effect of Rare-Earth Additives in Chromium Plating Solution

利用电镀铬废渣回收红矾钠

Recovery of Chromate from the Residue in Chromium - plating

氢化锆表面电镀铬制备氢渗透阻挡层的研究

Preparation of Hydrogen Permeation Barrier of Chromium Coating Electrodeposited on Zirconium Hydride

电镀铬液中铬酸酐含量的快速测定

Quick Determination of Chromic Anhydride in Chromium Electroplating Bath Solution

三价铬电镀铬的工艺研究

The Technical Study on Chromium Plating for Trivalent Chromium

三价铬体系电镀铬-镍合金工艺

Technology of Chromium-Nickel Alloy Election-Plating of Trivalent Chromium System

用六价铬还原产物电镀铬

Chromium Electro plating Using Reduced Product of Hexavalent Chromium

电镀铬生产线操作及监控系统

Operation and Monitoring System in the Chromium Plating Line

电镀铬大幅度降低基体的疲劳性能，疲劳寿命降低幅度达70%~95%。

The Chromium electroplating greatly reduces the fatigue life by 70 ~ 95 % .

电镀铬泥稳定化处理的研究

Study on the Stabilization of Electroplate Chromium Mud

微生物净化电镀铬废水的研究

Microbial purification of Cr (ⅵ) containing electroplating wastewater

电镀铬添加剂的发展与展望

Development and Prospect for Chromium Electroplating Additives

碘酸钾对电镀铬过程的作用

Effect of potassium iodate on chromium electrodeposition

汽缸套电镀铬厚度精密测控系统设计

Design and Study on Precision Measure-control System for Chromium Electroplating Thickness of Cylinder Liner Abrasion

电镀铬自己能做么？

Can self make electricity chromate treatment ?

不锈钢模具板化学蚀刻、抛光和电镀铬研究

Study on the Chemical - etching , Chemical - polishing and Chromium-electroplating of Stainless Steel Mould

金刚石表面电镀铬新工艺

Electroplating Cr on Surface of Diamond

离心高速电镀铬工艺研究

Study of centrifugal high-speed chromium plating

电镀铬添加剂的对比研究

Comparative Study on Chromium Plating Additives

除非有其他方面的规定，否则，所有的外表面将会被认为是用来电镀铬的可见表面。

Unless otherwise specified , all exterior surfaces are to be considered visible surfaces for chrome plating .

铜合金电镀铬

Chromium plating for copper alloy

分析了影响蚀刻、化学抛光和电镀铬质量的因素，得到了化学蚀刻、化学抛光及电镀铬最佳工艺参数和操作规范。

Factors affecting on etching , polishing and electroplating were analyzed and the optimum parameters and operation conditions were obtained .

对于工业上通用的电镀铬技术及其近年来的进展也作了概括介绍。

For comparison , brief introduction is also given to the widely used technology of electroplated chromium and its recent development .

这种还原产物可以做为无毒性电镀铬的铬源。使用这种三价铬化合物进行了电镀试验，获得了厚度超过100μm的镀层。

The reaction product can serve as chromium source of nontoxic chromium plating and coating thicker than 100 μ m was obtained .