流延成型

采用PVA为粘结剂，甘油为塑性剂，流变测试发现，浆料为触变性流体，呈现明显的剪切变稀，适合于流延成型。

PVA is selected as binder and glycerol as plasticizer . Rheological measurements show that the slurries exhibit thixotropy behavior , which is suitable for tape casting .

Mo-（Fe-B）-Fe混合粉末流延成型薄层坯体的干燥机理分析

Analysis of drying mechanism on the tape casting laminar green tape of mo - ( fe-b ) - fe mixed alloy powders

流延成型法制备SiC多孔陶瓷工艺的研究

Study on the fabrication of porous SiC ceramics with tape casting

YSZ纳米粉料流延成型电解质薄膜性能研究

Properties of YSZ electrolyte thin film made by tape casting from nanocrystalline powders

燃料电池YSZ薄膜凝胶-流延成型的制备研究

Gel-Tape Casting of Yttria Stabilized Zirconia Thin Film

通过工艺参数的优化，确定将1L配方用作流延成型95氧化铝瓷的粉料配方。

By optimizing the process parameters , 1L prescription was decided to use in tape casting process .

BaTiO3瓷粉水基流延成型的研究

Study on Aqueous Tape-casting of BaTiO_3 Ceramic Powder

对纳米YTZP（氧化钇稳定）坯片在新型水基凝胶流延成型工艺中，气氛条件对浆料固化过程的影响进行了研究。

The influence of atmosphere condition on solidification procedure of nanometer tetragonal polycrystals zirconia ( YTZP ) slurry in the AqueousGelTapeCasting process was investigated .

旨在通过流延成型工艺制备BST-MgO微波铁电陶瓷材料。

This paper aims to prepare BST-MgO microwave ferroelectric ceramic materials by tape casting .

为了实现以上目标，本文研究了粉体组分、溶剂、分散剂等对流延成型工艺的影响，确定最佳的溶剂和分散剂，制备低温烧结的BST-MgO陶瓷材料。

For this propose , The effects of the powder constituents , solvent , and dispersant on the tape casting were investigated , to choose the optimal solvent , and dispersant . Moreover , BST-MgO ceramic materials with lower sintering temperature were obtained by tape casting .

亚微米级氧化铝的表面改性及其水系流延成型研究

Study on Surface Modification and Aqueous Tape-casting of Sub-micron Al_2O_3 Powder

工艺条件对薄片陶瓷材料凝胶流延成型的影响

Influence of Operating Condition on Gel-tape-casting Process of Ceramic Materials

水基凝胶流延成型四方多晶氧化锆薄膜的烧结与性能

Sintering and Behavior of Nanometer Tetragonal Polycrystalline Zirconia Films by Aqueous-Gel-Tape-Casting Process

水性粘合剂在电子陶瓷流延成型中的应用

Application of Aqueous Binder in Electronic Ceramic Tape - casting

氮化铝基板流延成型浆料的研究

Study on Slurry for Tape - casting Alumina Nitride Substrate

99氧化铝陶瓷基片的水系流延成型研究

Study on the aqueous tape casting for 99al_2o_3 ceramic substrate

陶瓷材料流延成型研究现状

Present Status of Research on Tape-casting Technology for Ceramic Materials

陶瓷材料水基流延成型工艺研究进展

Research Progress in Aqueous Tape Casting of Ceramic Materials

添加剂在水基凝胶流延成型中的作用

The effects of additives on aqueous gel - tape-casting

流延成型已经成为制备多层片式元件的支柱技术。

Tape casting has been the main technology to prepare multilayer chip PTCR components .

水基流延成型和热压烧结制备碳化硼陶瓷及性能研究

Study on Preparation and Properties of B_4C Ceramic by Aqueous Tape Casting and Hot-press Sintering

利用有机单体的聚合原理，成功进行了陶瓷薄片材料的凝胶流延成型。

Gel Tape Casting of thin ceramic sheets is successfully proceeded by the polymerization of organic monomer .

流延成型法制备三氧化二铝陶瓷膜基体（Ⅰ）浆体的制备和流延成型

A Study on Processing of Alumina Ceramic Membrane Substrate by Tape Casting (ⅰ) Suspension Preparation and Tape Casting

采用离心浇注法成型。流延成型法是目前制备熔融碳酸盐燃料电池电极板的主要工艺。

The technique of centrifugal casting was used . Tape casting is currently a powerful method for the manufacture of the electrode for molten carbonate fuel cells .

针对仿贝壳珍珠层结构特征，采用轧膜或流延成型工艺，成功制备出仿贝壳珍珠层结构特征的Si3N4/BN层状陶瓷材料。

The roll forming or tape casting were adopted and Si 3N 4 / BN laminated ceramics were successfully prepared by mimicking structural feature of pearl layer on shell .

PMMA可以通过注塑，挤出，浇铸，流延，粘接等成型加工。

PMMA by injection molding , extrusion , casting , casting , bonding , molding processing .