装饰膜

  • 网络Decorative Film;Decoration Films
装饰膜装饰膜
  1. 粘性装饰膜的粘合性不足,松动或破损。

    An adhesive decorative film does not have adequate adhesion , is loose or torn .

  2. 结合生产实际,本文简单介绍了塑料表面真空蒸镀装饰膜的生产工艺中,底涂料涂装的作用。

    Abstract Connecting with the produce practice , in the process of vacuum evaporation deposition decorative film , the action of base paint on plastic surface has been introduced simply in this paper .

  3. 真空阴极电弧沉积TiN装饰膜工艺与应用研究

    The process and application of tin decorative films formed by vacuum cathodic arc deposition

  4. 影响低温等离子体多弧镀TiN装饰膜膜层色泽的因素

    Study on tin decorative film color by low temperature multi arc plasma plating technology

  5. 多弧离子镀TiN装饰膜表面颗粒研究

    Study of Macroparticles on TiN Decorative Films Prepared by the Multi-Are Ion Plating Process

  6. 本文研究了真空阴极电弧沉积TiN装饰膜的工艺及其应用。

    In this paper , the process and application of TiN decorative films formed by vacuum cathodic are deposition are investigated .

  7. 利用物理气相沉积(PVD)真空蒸镀法,研究铬钛合金装饰膜。

    Vacuum evaporated film of Ti-Cr alloy has been studied .

  8. 软质PVC可以用来做成真空吸塑薄膜,用于各类面板表层包装,装饰膜,附胶膜,应用于建材,包装,医药等诸多行业。

    Can be used to make soft PVC vacuum film for packaging various types of panel surface , decorative film , with film , used in building materials , packaging , pharmaceutical and many other industries .

  9. 粘接PVC装饰膜其性能符合HG4119779部颁标准。共聚物对于木材、玻璃、陶瓷、瓷砖、混凝土墙面、壁纸、薄铁、包装纸箱密封条、均有良好的粘接性。

    The application of the copolymer to the binding of PVC decorative film could meet the standard HG4 1197 79 . The copolymer has good adhesion to wood , glass , ceramics , ceramic tile , concrete , wall-paper and so on .

  10. 将前部装饰膜放置在徽标的中心。

    Centre the decorative film at the front on the logo .

  11. 铝表面制备装饰膜的等离子电解氧化方法

    Plasma Electrolytic Oxidation for Preparation of Decorative Coating on Aluminum Alloy

  12. 离子镀装饰膜厚度测量技术

    Technology of the Thickness Measurement of the Ion Plating Decorative Film

  13. 真空蒸镀装饰膜工业化生产中的若干问题

    Some problems in the industrial production of ornament film by vacuum evaporation

  14. 蒸镀铬钛合金装饰膜的研究

    A study on vacuum evaporated decorative film of Ti-Cr alloy

  15. 此问题无法修复,应更换装饰膜。

    This problem cannot be fixed , replace decorative films .

  16. 有利于装饰膜批量生产效率的提高。

    The yield also has a great improvement .

  17. 用溶胶&凝胶法制备掺杂酞菁蓝的玻璃表面装饰膜

    Preparation of Decoration Film on Glass Surface Doped with Phthalocyanine Blue by Sol-Gel Process

  18. 将装饰膜粘贴到翼子板上。

    Affix decorative film to the wing .

  19. 无法对装饰膜进行不完全修复。

    Decorative films cannot be partially repaired .

  20. 热丝法化学气相沉积金刚石膜塑料表面真空蒸镀装饰膜工艺中底涂料的应用

    Application of Base Paint in the Process of Vacuum Evaporation Deposition Decorative Film on Plastic Surface

  21. 大功率半导体激光器功率转换效率的研究有利于装饰膜批量生产效率的提高。

    Study on Power Conversion Efficiency of High-power Laser Diodes The yield also has a great improvement .

  22. 将装饰膜与品牌徽标的孔和对齐,然后将其粘牢。

    Align the decorative film with the holes for the brand logo and and stick it on .

  23. 确保此时装饰膜尚未与车辆表面直接接触。

    Make sure that the decorative film does not yet come into direct contact with the surface .

  24. 而采用真空技术镀装饰膜,就可以做到无污染生产,达到环境保护的目的。

    Using vacuum method to deposited trimmed film can avoid polluting , reaching the purpose of environmental protection .

  25. 这些装饰膜由于形状设计缘故,应该是干贴的,而且初次粘合时效果更好。

    These decorative films are designed to be dry-bonded due to their shape and for better initial bonding .

  26. 实践证明,采用这种设备明显地改善了涂装质量及装饰膜的制备质量。

    The practice indicates that this device can obviously improve the quality of the paint spraying and decorative films .

  27. 对要将装饰膜粘贴至的车身的整个表面涂抹水乳剂。

    Coat the entire surface of the body to which you want to affix the decorative film with the water emulsion .

  28. 结合真空蒸镀装饰膜的生产工艺,介绍了底涂料和面涂料的涂装工艺及其作用。

    Connecting with the practice of vacuum evaporation decorative films , the role and technology of the paint spraying have been introduced .

  29. 通过多种测试实例,分析了影响膜层质量的因素,显示了多弧离子镀技术在装饰膜方面有很好的发展前景。

    The factors of influence on the quality of coated watch were analysed , the advantages of multi-arc ion plating are in-treoduced with examples .

  30. 同时讨论了模内复膜产品设计原则以及装饰膜的预成型工艺及其公差经验值。

    The design guideline of the plastics products with insert film decoration and the position deviation experience tolerance of the film pre-form process are discussed .