流延成型

  • 网络Tape Casting;tape-casting;Doctor-Blade Casting Process
流延成型流延成型
  1. 采用PVA为粘结剂,甘油为塑性剂,流变测试发现,浆料为触变性流体,呈现明显的剪切变稀,适合于流延成型。

    PVA is selected as binder and glycerol as plasticizer . Rheological measurements show that the slurries exhibit thixotropy behavior , which is suitable for tape casting .

  2. Mo-(Fe-B)-Fe混合粉末流延成型薄层坯体的干燥机理分析

    Analysis of drying mechanism on the tape casting laminar green tape of mo - ( fe-b ) - fe mixed alloy powders

  3. 流延成型法制备SiC多孔陶瓷工艺的研究

    Study on the fabrication of porous SiC ceramics with tape casting

  4. YSZ纳米粉料流延成型电解质薄膜性能研究

    Properties of YSZ electrolyte thin film made by tape casting from nanocrystalline powders

  5. 燃料电池YSZ薄膜凝胶-流延成型的制备研究

    Gel-Tape Casting of Yttria Stabilized Zirconia Thin Film

  6. 通过工艺参数的优化,确定将1L配方用作流延成型95氧化铝瓷的粉料配方。

    By optimizing the process parameters , 1L prescription was decided to use in tape casting process .

  7. BaTiO3瓷粉水基流延成型的研究

    Study on Aqueous Tape-casting of BaTiO_3 Ceramic Powder

  8. 对纳米YTZP(氧化钇稳定)坯片在新型水基凝胶流延成型工艺中,气氛条件对浆料固化过程的影响进行了研究。

    The influence of atmosphere condition on solidification procedure of nanometer tetragonal polycrystals zirconia ( YTZP ) slurry in the AqueousGelTapeCasting process was investigated .

  9. 旨在通过流延成型工艺制备BST-MgO微波铁电陶瓷材料。

    This paper aims to prepare BST-MgO microwave ferroelectric ceramic materials by tape casting .

  10. 为了实现以上目标,本文研究了粉体组分、溶剂、分散剂等对流延成型工艺的影响,确定最佳的溶剂和分散剂,制备低温烧结的BST-MgO陶瓷材料。

    For this propose , The effects of the powder constituents , solvent , and dispersant on the tape casting were investigated , to choose the optimal solvent , and dispersant . Moreover , BST-MgO ceramic materials with lower sintering temperature were obtained by tape casting .

  11. 亚微米级氧化铝的表面改性及其水系流延成型研究

    Study on Surface Modification and Aqueous Tape-casting of Sub-micron Al_2O_3 Powder

  12. 工艺条件对薄片陶瓷材料凝胶流延成型的影响

    Influence of Operating Condition on Gel-tape-casting Process of Ceramic Materials

  13. 水基凝胶流延成型四方多晶氧化锆薄膜的烧结与性能

    Sintering and Behavior of Nanometer Tetragonal Polycrystalline Zirconia Films by Aqueous-Gel-Tape-Casting Process

  14. 水性粘合剂在电子陶瓷流延成型中的应用

    Application of Aqueous Binder in Electronic Ceramic Tape - casting

  15. 氮化铝基板流延成型浆料的研究

    Study on Slurry for Tape - casting Alumina Nitride Substrate

  16. 99氧化铝陶瓷基片的水系流延成型研究

    Study on the aqueous tape casting for 99al_2o_3 ceramic substrate

  17. 陶瓷材料流延成型研究现状

    Present Status of Research on Tape-casting Technology for Ceramic Materials

  18. 陶瓷材料水基流延成型工艺研究进展

    Research Progress in Aqueous Tape Casting of Ceramic Materials

  19. 添加剂在水基凝胶流延成型中的作用

    The effects of additives on aqueous gel - tape-casting

  20. 流延成型已经成为制备多层片式元件的支柱技术。

    Tape casting has been the main technology to prepare multilayer chip PTCR components .

  21. 水基流延成型和热压烧结制备碳化硼陶瓷及性能研究

    Study on Preparation and Properties of B_4C Ceramic by Aqueous Tape Casting and Hot-press Sintering

  22. 利用有机单体的聚合原理,成功进行了陶瓷薄片材料的凝胶流延成型。

    Gel Tape Casting of thin ceramic sheets is successfully proceeded by the polymerization of organic monomer .

  23. 流延成型法制备三氧化二铝陶瓷膜基体(Ⅰ)浆体的制备和流延成型

    A Study on Processing of Alumina Ceramic Membrane Substrate by Tape Casting (ⅰ) Suspension Preparation and Tape Casting

  24. 采用离心浇注法成型。流延成型法是目前制备熔融碳酸盐燃料电池电极板的主要工艺。

    The technique of centrifugal casting was used . Tape casting is currently a powerful method for the manufacture of the electrode for molten carbonate fuel cells .

  25. 针对仿贝壳珍珠层结构特征,采用轧膜或流延成型工艺,成功制备出仿贝壳珍珠层结构特征的Si3N4/BN层状陶瓷材料。

    The roll forming or tape casting were adopted and Si 3N 4 / BN laminated ceramics were successfully prepared by mimicking structural feature of pearl layer on shell .

  26. PMMA可以通过注塑,挤出,浇铸,流延,粘接等成型加工。

    PMMA by injection molding , extrusion , casting , casting , bonding , molding processing .