外设接口

基于FPGA和ARM核处理器的外设接口

Design of Peripheral Interface Based on FPGA and ARM Core Processor

可编程外设接口IP的设计

IP Design of the Programmable Peripheral Interface

基于ARM微控制器系统的外设接口设计

A General Interface Design Method Based on ARM Micro-Controller Systems

基于DSP串行外设接口的通信

Communication of Serial Peripheral Interface Based on DSP

基于FPGA单片机外设接口电路优化设计

Optimal Design of Interface Circuit of MCU 's Peripheral Device Based on FPGA

USB出现于1994年，如今已经成为PC的标准外设接口。

Announced in 1994 , USB has become the standard peripheral interface of PC.

基于USB规范的外设接口开发技术

Development Technology of Peripheral Equipment Interface based on USB Specification

PC基的外设接口仪器

Peripheral Interface Instrument Based on PC

微控制器USB外设接口及应用设计

USB Interface and its Design for Application in MCU

USB外设接口的FPGA实现

USB Peripheral Device and its FPGA Implementation

研究USB总线技术在电脑外设接口中的应用以及实现USB总线接口的芯片控制器。

The application of USB technology for the device connected to PC and the USB controller .

微处理器系统外设接口控制器的VLSI设计技术研究与实现

Research and Realization on the VLSI Design Critical Technologies of Microprocessor Systems Peripheral Interface Controllers

第二章中，介绍了开发使用的硬件环境。包括DSP芯片的结构特点，外设接口，流水线，以及开发用的评估板和软件平台的特点。

Chapter II elaborates on the hardware environment of the developement , including the character of DSP , peripheral interface , pipelining and so on .

USB接口被广泛地应用在计算机外设接口地设计中，尤其是嵌入式系统和穿戴计算机系统。

USB is widely used in the designing of computers ' peripheral interfaces , especially in embedded system and wearable computers system .

采用即插即用计算机外设接口（USB）技术和模块化设计思想是本设计的最大特点。

The maximal feature of the system design is that it uses computer peripheral technique of plug and play and modularization design idea .

通用串行总线（USB）是目前PC外设接口的主流总线标准，并迅速在工业自动化仪器仪表中得到应用。

USB ( Universal Serial Bus ) is a mainstream bus standard of PC peripheral interface , which extends its applications to industrial automatic instruments .

尤其是DSP芯片，它丰富的外设接口和高度的可编程性使得视频监控的硬件和软件都更容易实现。因此，本文对基于DSP的视频监控系统集成平台的设计进行了研究。

Especially , DSP chips include abundance of peripheral interface and have very high programmed ability , which make the hardware and software of video surveillance system be implemented easily .

以基于USB规范接口的移动存储实现为例，探讨了开发符合USB协议规范的外设接口的一般原理及各部分的软硬件实现过程。

This paper discusses the normal principle of developing the peripheral equipment in accord with USB specification and implementation process of software and hardware of each unit .

本项课题在研究已有的安全体系结构的基础上，结合计算机外设接口，开发了一种新的USB接口加密系统。

Based on the current available security system models , we have developed a new practical USB interface security system with the feature of the new interface .

USB接口技术作为近年来流行的计算机外设接口标准倍受关注。

As a popular interface used by devices for computer , the technology of USB interface has been paid more and more attention to during these years .

串行外设接口SPI（SerialPeripheralinterface）是由Motorola公司提出的一种高速高效的接口技术，支持全双工、同步的串行通信方式。

The SPI ( Serial peripheral interface ) put forward by Motorola is a high-speed and efficient serial interface technology , support full-duplex , synchronous , serial communication .

同时，作为计算机外设接口技术的重要变革，USB在传统的计算机组织结构的基础上，引入网络的拓扑结构思想。

At the same time , the introduction of USB on external interface technique , acts as a major change on the basic structure of the classical computers .

通用串行总线（USB）是计算机外设接口的发展趋势，文中介绍了一种把USB总线应用于视频监视和会议系统中的方案。

Universal Serial Bus ( USB ) makes the connection between computers and peripherals easier , an application of USB in a new video Surveillance and Conferencing System is introduced .

论述了串行外设接口（SPI）的原理，扩展了多从/多主模式、线与等新功能。

The principle of SPI was introduced , and new functions of multiple slave / master mode and wired-and were designed in this paper .

测试结果表明，开发出来的无线外设接口能够成功将有线键盘鼠标转换成无线键盘鼠标，使用距离达到15米，且使用USB接口与计算机连接，实现了即插即用。

The test results show that using the wired keyboard and mouse can be successfully converted into a wireless one through the developed wireless interface and the maximum distance is 15 meters .

电脑外设接口USB2.0规范及IEEE1394规范探析

Probe into the USB 2.0 Specification and IEEE 1394 Specification of Computer 's Peripheral Interfaces

其中，考虑到USB是新兴的外设接口技术，论文着重论述了根据USB总线协议如何研制USB接口电路，如何设计USB接口Host端固件程序。

Considering the emerging interface technology USB , this paper mainly discusses the problems of how to develop USB interface circuit according to USB bus protocol and how to design driver program of USB interface .

通用串行总线USB作为一种计算机和外围设备连接的总线接口，由于它支持热插拔、通信速率高等特点，使得它已经成为应用最为广泛的外设接口。

Universal Serial Bus ( USB ) is one of bus interfaces for computer and the peripheral devices . And it has become the most widely used interface due to its hot swap and high transfer rate .

本文介绍了MMC卡的工作原理和多媒体卡的串行外设接口协议（SPI）模式，给出了微处理器与MMC卡的接口电路、程序流程图及部分程序代码。

In this paper , the principle and the SPI mode of the multimedia card are introduced . The interface of the multimedia card and the microprocessor are given finally .

本设计为SOPC系统中嵌入USB主机控制器提供了有效可行的实现方案，拓展了SOPC系统的外设接口，具有较高的应用价值。

This design provides feasible and effective implementations for embedding USB host controller in the SOPC system , expands the peripheral interfaces of SOPC system . It is of higher application value .