电路设计技术

同时在设计的过程中，进一步地探讨了基于FPGA的高速电路设计技术，对于FPGA的设计有参考价值。

Moreover , it contributes a lot to the high speed design of FPGA .

在同步电路设计技术的基础上提出了IP软核规范化设计的具体方法；

Firstly the standard design pattern of IP core is given based on the implementation of a synchronous circuit design .

一种低功耗CMOS分频电路设计技术

A low power dissipation CMOS divider design technique

基于多值逻辑方法的二值神经元MOS电路设计技术

A Design Technique of Neuron MOS Binary Circuits Based on Multiple-Valued Logic

CMOSSRAM抗辐照加固电路设计技术研究

Research of CMOS SRAM Radiation Harden Circuit Design Technology

CMOSVLSIESD保护电路设计技术

ESD Protection Circuit Design Technology for CMOS VLSI

象其它的集成电路设计技术一样，光刻分辨率增强技术也需要基于计算机技术的EDA工具的支持。

Like other technologies used in IC design , RET needs the support of computer technology .

基于Web的eDFM电路设计技术

EDFM Circuit Design Techniques Based on Web

近年来，随着集成电路设计技术和工艺水平的不断提高，CMOS图像传感器发展迅速。

In recent years , with the improvement of the integrated circuit design technical and technological level , the CMOS image sensors get rapid development .

在CMOS集成电路设计技术和应用技术中，低功耗设计是一个十分重要的研究内容。

With the development of the design and application technology of CMOS integrated circuits , low power design is one of the most important research issues .

随着便携式电子产品和超深亚微米CMOS工艺技术的不断的发展，低电压、低功耗的模拟电路设计技术正成为研究的热点。

With the development of portable electronic products and deep sub-micron CMOS process technology , low-voltage and low-power analog circuit design techniques are becoming research hotspot .

基于USB2.0的高速串行通信接口电路设计技术研究

Research in High-speed Serial Link Circuit Design Technology Based Upon USB 2.0

通过对低压低功耗集成电路设计技术的分析，着重设计了一个基于衬底驱动技术的CMOS带隙基准电压源，其带有提高电源抑制比电路和启动电路。

A CMOS bandgap voltage reference with low voltage based on the bulk driven technology is designed in this paper , with circuit to improve PSRR and start-up circuit .

随着集成电路设计技术及制造技术的发展，片上系统（SoC）已成为超大规模集成电路领域主流技术之一。

With the improvement of design techniques and manufacturing technologies of the integrated circuits , SoC ( System on Chip ) has become one of the mainstreams in the VLSI field .

系统VCO模块采用微分电路设计技术，可将电源噪音对时钟信号输出抖动的影响降至最低。

The VCO module makes use of differential coefficient circuit design technology to lower the effect of power resource on the clock signal input shake .

数字通信技术、集成电路设计技术及半导体制造技术的发展使得在单芯片上实现高速QAM解调器成为可能。

It is possible to implement a single-chip high-speed QAM demodulator on account of the development of digital communication , microelectronics and integrated circuit ( IC ) design .

其中，电路设计技术是发展低功耗设计的重点，它包括弱反型／亚阈值电路、衬底驱动MOSFETs、浮动栅极MOSFETs、Self-CascodeMOSFETs、电流模电路和电平移位等技术。

Circuits design strategies are emphasized in developing the low power device . The strategies include weak-inversion / sub-threshold circuits , bulk-driven MOSFETs , floating-gate MOSFETs , self-cascode MOSFETs , current-mode circuits , and voltage-shift technologies .

本论文在研究PCI总线规范和专用集成电路设计技术的基础上，采用Xilinx公司的FPGA产品Spartan-IIE完成了PCI从设备控制器的设计，并设计了PCI总线控制器功能验证所需的硬件电路系统。

Based on a deep study of PCI bus specification and of ASIC design technology , a PCI target controller , using Xilinx FPGA ( Spartan-IIE ), has designed and implemented in this thesis . A hardware system for function verification of the designed controller is constructed too .

低压低功耗模拟集成电路设计技术及展望

Low-Voltage / Low-Power Technology for Analog IC 's and Its Prospect

电磁信号分析仪的中频电路设计技术研究

Technology research of IF circuit use on electromagnetic signal analyzer

非接触式IC卡芯片的耦合电源及相关低压电路设计技术

Technique of Coupling Power Supply and Low-voltage Circuit for Non-contact IC Chip

数模混合集成电路设计技术研究

Research on Mixed Signal Integrated Circuits Design Technology

面向胶囊内镜系统应用的图像压缩和集成电路设计技术

Case Study on Image Compression and Its Integrated Circuit Implementation for Wireless Endoscopy System

集成电路设计技术进展

Progress of Integrated Circuit Design Technology

对于当前的集成电路设计技术，计算机辅助模拟已成为一种不可缺少的工具。

For the Integrated Circuit design nowadays , the Computer Aided Simulation has been an indispensable tool .

阻抗匹配是一种传统的电路设计技术。当天线工作于某个谐振模式时，对其进行等效电参数提取之后，就可以利用经典的阻抗匹配技术设计所需的阻抗匹配网络。

An impedance matching network could be easily designed by using the matching theory after extracting the electrical parameters of a single-mode antenna .

近年来，由于器件工艺水平的提高和电路设计技术的改进，模拟集成电路获得了很大的发展。

With the improvement on the technology for circuit designing and device processing , great progress has been made in analog ICs in recent years .

随着高性能嵌入式处理器的普及和集成电路设计技术快速发展，嵌入式系统的功能越来越强。

With the rapid development of integrated circuit and a great deal of usage of embedded processor , the function of the embedded system is more and more powerful .

应用电子电路设计技术，以系统精确性和实时性为设计主要目标，建立了电力测功机测试系统的硬件平台。

The technology of electrical circuit design are applied to establish the hardware platform for testing system of electrical dynamometer with the accuracy and real-time ability as the main design objectives .

随着半导体工艺技术和集成电路设计技术的发展，图形加速系统开始由基于嵌入式微处理器/LCD控制器的架构转向基于图形加速卡的片上系统架构。

As a result of the development of semiconductor technics and IC design technique , Accelerated Graphics System ( AGS ) changes from MCU / LCD controller based architecture to SoC based architecture .