树脂体

充填树脂体的成烃特点取决于所充填类脂物的性质。

The hydrocarbon-generating characteristics of filled resinite would depend on the properties of filled resins .

中国煤及生油岩中树脂体的成因类型及成烃特征

The origin of types of resinite and their hydrocarbon-generating characteristics in coal and oil source rocks

百色褐煤中树脂体特征及意义

Characteristics and Significance of Resinites in Brown Coal of Baise Basin

泥炭、软褐煤中的树脂体的荧光光度术研究

Fluorescence Study on the Resinite of the Peat and Soft Brown Coal

煤中树脂体的浮选研究

Research on floatation of fossil resin from coal

为0.3%时，即可由树脂体、藻质体等形成不成熟的轻质油和天然气，从而在油气勘查中需考虑这部分资源量。

This part of resource extent must be considered in oil and gas exploration .

煤中树脂体的分离与提纯研究

Study on separating and purifying resin in coal

黄县煤田第三纪有机岩中树脂体类型及成烃意义

The resinite types and their hydrocarbon-forming significance in tertiary organic source rocks in Huangxian coalfield

树脂体成烃的地球化学研究&兼论我国第三系树脂体成因的未成熟-低成熟油气资源

Geochemical Investigation of Hydrocarbon Generation of Resinites & On Tertiary Resin-Originated Immature-Low Mature Oil and Gas Resources in China

薄板（10）在内表面（12）有一个树脂体和一个凹槽（13），位于对称平面内。

The lamellae ( 10 ) have a resin body and a recess ( 13 ) in the inner surface ( 12 ), in the plane of symmetry .

莺-琼盆地存在巨厚的上第三系海相烃源岩，它含有丰富的超显微树脂体，因而可划分为好&很好烃源岩。

There are very thick Upper Tertiary marine hydrocarbon source rocks in Yong-Qiong basin , containing abundant supermicro resinous materials ; Thus , they are classified as good-very good source rocks .

广西百色盆地州景矿第4煤层为典型的腐殖型褐煤，显微组分中富含树脂体。

The coal seam No : 4in Zhoujing mine , Baise basin of Guangxi , is referred to as a typical humic type of brown coals , whose maceral composition is characterized by enriched resinites .

~（32）P标记阳离子交换树脂微球体方法的研究

Preparation of ~ ( 32 ) p-labelled cation exchange resin microspheres for treating hepatic tumors

酚醛树脂前驱体CC复合材料研究&硼酚醛树脂理化性能分析及固化、热解过程研究

Physical-chemical properties and curing pyrolysis processes of boron phenolics precursor in carbon carbon composites

纳米SiO2对环氧树脂浇铸体性能的影响

Influence of Nanometer SiO_2 on the Properties of Epoxy Resin

研究了特种水泥（ASC）树脂固化体的微观结构。

In this paper , the microstructure of Spent Ion Exchange Resin ASC cement-solidification matrix was studied .

本文首先对氰酸酯树脂单体进行了提纯，并对提纯前后的单体采用FTIR、DSC、GC-MS等现代测试手段进行了分析。

First , the monomer of CE was purified and tested by modern methods of testing such as DSC , FTIR , GC-MS , and so on .

并对树脂单体材料的纯度以及PMR型树脂溶液中的单体及单体异构体成分进行了分析。

The information was obtained on monomeric isomer distribution of PMR polyimide resin solution and purity of prepared materials .

目的：研究不同增稠载体与不同过氧化脲（carbamideperoxide，CP）浓度配制的漂白剂对光固化复合树脂修复体颜色的影响。

Objective To investigate the effect of bleaching agent prepared by different viscosity carrier and concentration carbamide peroxide ( CP ) on the color of light-polymerized composite resin restorations .

制作陶瓷/复合树脂粘结体，室温下置蒸馏水中浸泡24h，微拉伸法测试各组试件粘结强度。

Each ceramic block was bonded to composite resin with light curing resin cement , and the samples were cut for micro-tensile bond strength test after 24 hour storage in room temperature distill water .

当树脂单体用量摩尔比MMA∶AN∶AA为3∶1∶12时，由该树脂所配的油墨性能最好。

When the molar ratio of the resin monomer of MMA ∶ AN ∶ AA was 3 ∶ 1 ∶ 0.5 , the property of the ink made from the prepared resin was the best .

利用钛酸酯偶联剂处理纳米TiO2表面时，不同处理方式对环氧树脂浇注体的冲击性能有较大影响。

The TEM revealed that the more agglomeration of particles was occurred with the increase loading of nano-TiO2 . The impact properties of epoxy resin casting body were influenced greatly by the different modifying method of nano-TiO2 surface using titanate coupling agent .

本文用硅烷偶联剂KH－570对滑石粉、空心玻璃微珠进行表面处理，并对改性无机填料填充UP树脂浇铸体及其GFRP的力学性能进行了测试。

In this paper , silane coupling agent KH-570 was used to treat talc and hollow glass microsphere , the mechanical properties of cast UP resin and its GFRP filled with modified inorganic filler were also tested .

经过实验的研究发现，BMI与CE的反应性不如EP与CE的反应性好，因此采用先使BMI与CE反应，然后再加入EP的方法得到了较为良好的树脂浇铸体样品。

In the research course of modifying to the cyanate ester , it was discovered that only BMI was melted to the liquid state first , then added in CE and EP , well than the comparatively good resin casting body samples could be got through a lot of experiments .

利用电子万能试验机和分离式Hopkinson压杆研究了乙烯基酯树脂浇铸体在准静态和高应变率下的压缩特性，考察了试样压缩失稳和破坏的形貌。

Quasi-static and high strain rate compressive experiments on the vinyl ester resin casting were carried out by using a material universal testing machine and Hopkinson bar , and the behaviors of compressive instability and fracture of the resin casting at different strain rates were investigated .

树脂浇铸体具有良好的性能，热变形温度113℃，拉伸强度80MPa，冲击强度12.8kJ/m2。

The optimum resin casts were detected to have good properties with ll3 ℃ of heat distortion temperature , 80 MPa of tensile strength and l2.8 kJ / m 2 of impact strength .

防沉降性铝酸酯在含填料环氧树脂浇铸体中的应用

Application of anti-setting aluminate in epoxy resin coating system containing fillers

并制作一树脂固体体模方便了日常测量。

Making an solid phantom to make easier for daily measurement .

离子交换树脂珠体悬浮聚合技术探讨

Studies on the Suspention Polymerization of Ion Exchange Resin Beads

丙烯酸树脂分散体对双组分水性聚氨酯性能的影响

Effect of acrylic dispersion on properties of two-component waterborne polyurethane