树脂砂轮

人造金刚石树脂砂轮磨削比的提高方法金刚石砂轮恒力磨削Si3N4陶瓷的钝化模型

On Grinding Rate of Man-made Diamond Resin-bonded Grinding Wheel ; Passivation Model of Diamond Wheel for Constant-force Grinding Si_3N_4 Ceramics

本文通过对比磨削试验，研究了自锐性金刚石（CSD）树脂砂轮的磨削性能。

Through grinding experiments , the grinding performances of resin bond grinding wheels made with self - sharpening diamond ( CSD ) was studied .

聚酰亚胺金刚石树脂砂轮耐磨性能研究

Study On Wear Resistance of Polyimide Resin Bond Diamond Wheels

刚玉涂覆的金刚石树脂砂轮的制造及其应用

Manufacture and Application of Resin - bonded Corundum - Coated Diamond Wheel

用树脂砂轮磨削低噪音钢球的工艺试验

Process test for grinding low-noise steel ball with resin wheel

本公司系生产树脂砂轮的大型专业厂家。

Our company is a big company specialized in manufacturing all kinds of Resin-bonded emery wheels .

结果表明，采用刚玉涂覆的金刚石制造的树脂砂轮，其工作效率比未采用刚玉涂覆处理的金刚石制造的树脂基砂轮提高了35%，使用寿命延长35%以上；

The results showed that the efficiency of the wheels made of diamond with corundum coating increased by 35 % , its life time also prolonged by 35 % .

钢球加工过程中采用树脂砂轮进行研磨，代替了铸铁板加磨料的加工方法，使钢球质量得到很大提高。

During steel ball processing , resin bond wheel was used to grinding to replaced a processing way of cast iron plate and grinding material , so the steel ball quality was raised greatly .

助磨活性填料Al2（SO4）3·18H2O在树脂薄片砂轮中的应用

Application of Grinding Aids Active Filler in Resin Thin Slice Grinding Wheel

脉冲激光烧蚀树脂CBN砂轮的数值模拟研究

Numerical Simulation of Ablation of Resin-Bonded CBN Grinding Wheels by Pulsed Laser

CSD金刚石树脂结合剂砂轮的研制与应用

Development of resin bond CSD diamond grinding wheel

ANSYS模拟仿真结果验证了所建模型能够正确描述声光调Q脉冲激光修锐树脂CBN砂轮这一物理过程，可为试验研究和生产实际提供指导。

The numerical simulation results of ANSYS have verified that the model can describe the ablation process properly and offer guide for the experimental study and production .

建立了砂轮的几何模型和单个激光脉冲烧蚀树脂CBN砂轮的传热模型。

Geometric model of the wheels and thermal conduction model of single laser pulse ablating resin-bonded CBN wheels have been established .

仿真结果验证了声光调Q脉冲激光修锐树脂CBN砂轮时热影响区域和热积累小的特点。

Numerical simulation results confirm that dressing of resin-bonded CBN grinding wheels by AOQ-switched Nd : YAG pulse laser has characteristics of little heat accumulation and small heat effect zone .

碳化硅（SiC）微粉作为磨料或填料在陶瓷精磨磨具、树脂抛光砂轮以及金刚石抛光砂轮等方面有着广泛的应用。

Silicon carbide ( SiC ) powder , as the abrasive material or the stuffing , has the extensive application in vitrified bonded abrasive product , resin bonded polishing wheel and in diamond polishing wheel .

本文研制的CSD磨料树脂结合剂砂轮，与RVD树脂结合剂砂轮相比，有许多磨削性能的优点，值得推广应用。

The authors of this paper developed a new resin bonded CSD grinding wheel . Compared with resin bond RVD grinding wheel , it has much more advantages in grinding .

试验研究了单个激光脉冲烧蚀树脂CBN砂轮和脉冲激光对其修锐的情况，分析了修锐机理，总结出激光、工艺参数对修锐效果的影响规律。

Experiments on ablation and dressing of resin-bonded CBN grinding wheels by single laser pulse and by pulse laser respectively have been carried out to analyze dressing mechanism and disciplines of dressing effects influenced by laser and technology parameters .

激光修锐树脂结合剂砂轮的试验研究

An Experimental Study of Laser Dressing Process of Resinoid Bonded Wheel

光敏树脂结合剂砂轮结合强度的研究

Study on the bonding strength of the grinding wheels using photosensitive resin

贮存方式对树脂切割砂轮性能的影响

Effects of Storage Means on Performance of Resin Bond Abrasive Cutting Wheel

工程试验法在新型树脂切割砂轮研究中的应用

Engineering Experimental Methods Applied in New-type Resin-bonded Cutting Wheel

树脂结合剂砂轮表面形貌的激光扫描测量与分析

Measurement and Analysis of Surface Topography of Resin Bonded Grinding Wheel by Laser 3D Scanning

新型树脂切割砂轮的研制

On Development of New-typed Resin-bonded Cutting Wheel

青刚玉树脂切割砂轮

Blue corundum resin cutting grinding wheel

我公司生产的人造金刚石树脂结合剂砂轮也有广泛的应用领域。

I produced synthetic diamond resin bonded grinding wheel also has a wide range of applications .

圆盘式树脂结合剂砂轮

Cymbal form resin bond wheel

光固化树脂超薄砂轮切割锯片的研制GB/T16958-1997包装用双向拉伸聚脂薄膜

A Study on the Development of Dicing Blade Using Photo-curable Resin ; Biaxially oriented polyester film for package

本文介绍了磨稀土永磁材料树脂金刚石砂轮的制作技术。

This paper introduced the process technology of resinoid diamond grinding wheel for grinding rare earth permanent magnet materials .

采用激光三维扫描方法，对树脂结合剂砂轮的表面形貌进行了测量。

In this paper , the surface topography of resin bonded grinding wheel was measured by laser 3D scanning .

公司生产的两大主导产品是橡胶结合剂和树脂结合剂砂轮。

The company produces two leading products are the rubber bond grinding wheel and the resinoid bond grinding wheel .