造型材料

  • 网络Molding Material;Modeling Material;molding medium
造型材料造型材料
  1. 潮模砂日益增长的热负荷,更快的循环时间以及对造型材料质量要求的提高,对型砂制备提出了更高的要求。

    The growing thermal load of green sand , the quicker recirculation times and the increased requirements on the quality of molding material make new demands on the molding sand preparation .

  2. 综述中国铸造行业的生产技术现状,包括造型材料、铸造工艺、合金材料及熔炼和计算机的应用。

    The production technologies of Chinese foundry industry such as the molding material , the foundry technology , the alloy material and melting process , the application of computer , have been discussed .

  3. 针对以金属板材为造型材料的分层实体制造中存在的精度问题,提出了一种新LOM方法直接快速制造金属功能零件。

    Aiming at the accuracy problems existed in the LOM using metallic modeling materials , puts forward a new LOM method to make the metal functional parts directly and quickly .

  4. 本文提出以较厚的金属板材作造型材料,采用分层实体制造方法快速制造金属功能零件,但必须解决LOM造型精度问题。

    In this paper , the metallic functional part is rapidly manufactured by Laminated Object Manufacturing ( LOM ) process using the thicker sheet metal as the modeling materials . But the question of modeling precision in the LOM must be solved .

  5. 球铁件铁丸真空实型铸造时,造型材料采用粒径分别为φ0.3mm、φ0.5mm、φ0.8mm的空气雾化铁丸,按比例混合,混后其紧实堆装密度宜为4.78g/cm3。

    When EPC process was used to produce iron shot of nodular graphite iron , the molding materials usually adopt prorated air atomizing iron shots with three different diameters , which are ( 0.3 mm )、 0.5 mm and 0.8 mm respectively .

  6. 高锰钢铸件用三元复合造型材料的研究

    The Study on the Ternary-composite Molding Materials for High Manganese Steel Castings

  7. 快速光造型材料的表面处理技术

    The Surface Processing Techniques for the Rapid Model Building with Photosensitive Resin

  8. 在湿型铸造中造型材料对改善铸件表面质量的作用

    Moulding Materials Act on Improving the Surface Quality of the Casting in Green Sand Casting

  9. 基于蓝牙技术的造型材料检测数据传输及处理的软件系统

    A Software System of Data Transmission and Processing for the Testing Molding Materials Based on Bluetooth Technique

  10. 文章还对今后我国砂型铸造工艺和造型材料技术的发展进行了展望。

    In addition , a prospect for sand casting technology and molding materials of China is also presented .

  11. 造型材料与创意&艺术设计99级造型训练课教学随感

    Modeling material and (?) riqinal idea & random thoughts on the art and design of modeling training class teaching in Grade 99

  12. 厚大钢铸件防粘砂用造型材料的研究气化模铸造碳钢铸件含碳量的变化

    Moulding Materials for Preventing Thick-Wall Steel Castings from Metal Penetration A STUDY ON CARBON CONTENT CHANGES OF CARBON STEEL CASTINGS IN EVAPORATIVE PATTERN CASTING

  13. 建立了铸铁、铸钢、高温合金、铸造有色合金等金属材料,以及石英砂等造型材料的热物性参数数据库。

    The database including the thermal physical properties of iron , cast steel , super alloys , cast nonferrous alloys and various molding materials were existed .

  14. 通过观察表面质量、内部缺陷和增碳量,分析了选用不同密度的造型材料对铸件的影响;ω为ω碳原子上的取代基数。

    We had also analyzed that the different density of model material affected the casting which based on observing the surface , interior disfigurement and carbon increment .

  15. 从化学成分、铸件结构、造型材料等几个方面探讨了潜水电机耐高压机座的铸造工艺。

    The foundry technology for resistant pressure base seat of submarine motor were discussed from some respects of chemical constitution , analysis of casting structure , modeling materials etc.

  16. 与其它精密铸造工艺相比,既可实现铸件的近净形化,又避免或降低了模具材料、造型材料对环境带来的压力。

    Compared with other kind of precise casting processes , FCP can reduce the environment pollution caused by pattern and molding materials as well as realize near net casting .

  17. 精密铸造是一种钛合金常用成型方法,但常用的造型材料会与熔融钛合金发生反应生成富氧α层,使铸件质量恶化。

    Investment casting is a common method for titanium alloy forming , however , the casting performance would be degraded by the oxygen-rich alpha-case formation reaction between molten titanium and mold material .

  18. 笔者通过生产实践,就湿型铸造中如何发挥造型材料对改善铸件表面质量的作用这一问题,提出了一些具体的看法。

    Passing through production practice , the authors have put forward some specific measures and views about the problem that moulding materials act on improving the surface quality of the casting in green sand casting .

  19. 从浇注位置、凝固分析、浇注系统设计和造型材料等几个方面探讨了大型水轮机组用不锈钢导叶的铸造工艺,并采用计算机对铸件凝固过程进行了数值模拟。

    Blades for large hydraulic turbine units were discussed from some respects of pouring position , solidification analysis , pouring system design and modelling material etc. . The casting solidifying process was simulated by computer .

  20. 论文构建了工业设计工程基础的知识体系,并论述了其主要组成内容:造型材料基础,成型工艺基础,表面技术基础和数字化技术基础。

    The knowledge system of engineering basics of industrial design is set up and its contents such as molding material basics , molding technique basics , surface technology basics and digital technology basics are discussed in this paper .

  21. 以采用常规的熔炼设备和造型材料熔铸出Cu-Cr合金铸件&高压大电流电极触头板为例讨论这一熔铸的工艺方法。

    The authors will discuss the melting and casting technology to produce Cu Cr alloy casting , employing usual melting equipment and molding materials . The electric contact plate withstanding high voltage and current will serve as an example .

  22. 发达国家在造型材料回收方面进行了近一个世纪的探索和研究,其中包括对砂型铸造生产中旧砂的再生利用,以此提高铸件质量、减少自然资源的消耗、降低环境污染。

    In developed countries , reclamation of moulding materials has been studied for almost a century and the reclamation technology of the used sand has been developed and popularized , which has led to higher casting quality , lower consumption of the natural resources and less environmental pollution .

  23. 室内设计中造型艺术材料的研究与应用

    The Research and Application of Materials in the Interior Design

  24. 构成元素线的造型及其材料在家具设计中的应用

    Modelling of Line and Its Application in Furniture Design

  25. 产品造型设计材料的感觉特性

    The Feeling Feature of Material on Product Design

  26. 国内外钛合金精密铸造型壳材料的发展概况

    Development of Shell Mold Materials for Ti Alloy Investment Casting in Domestic and Foreign Countries

  27. 天津财经大学教学楼在平面功能、造型、材料、空间等方面给我们提出了一种可参照的案例。

    The TianJin Finance and Economics University teaching building provides a referable example on such aspects as plane function , configuration , material and space .

  28. 装饰绘画运用构图、色彩、造型、材料等构成元素,在二维的空间中营造作者心理想的、肉眼看不到的审美幻想。

    Decoration painting makes use of various elements such as structure , color , shape and materials to form an imagined and invisible aesthetic illusion .

  29. 包装形态是包装设计作品在结构、造型、材料等因素的影响下所呈现出的一种形式和状态。

    Packaging form is packaging design works in structure , shape , materials under the influence of such factors as the show a form and condition .

  30. 而现代城市建筑小品与传统小品相比,其功能、造型、材料和工艺更体现出工业信息化时代的特点。

    The pieces of modern urban architecture and traditional pieces compared to its function , shape , materials and processes but also reflect the characteristics of industrial information age .