陶瓷型铸造

薄壁陶瓷型铸造工艺的研究与应用

Thin wall ceramic mold casting process and it 's application

快速金属模具的陶瓷型铸造工艺

Ceramic Mold Casting Process for Rapid Metallic Die

基于SL原型的陶瓷型铸造型壳焙烧过程开裂问题的探讨

Discussion About Cracking of SL Pattern Ceramic Shell in Baking

应用此陶瓷型铸造工艺浇铸的铸钢模具，尺寸精度达到国家标准CT3～4，表面粗糙度达Ra32，可用于实际生产。

The processes of producing cast steel dies by the ceramic mold method can be directly utilized in foundry workshop . The dimensional tolerances of the dies thus made can reach to China National Standard CT3 ~ 4 and the surface roughness to Ra 3.2 .

涂撒混合粘结剂浆砂陶瓷型铸造新工艺

A New Method of Stuccoing Mixed Binder Slurry on Ceramic Mold

箱体用灰铁金属型模具的设计及其陶瓷型铸造

Design of Metallic Die for Vessel and Its Ceramic Casting

陶瓷型铸造45钢塑料模具工艺技术

Technology of Using Ceramic Mould to Cast Steel Toolings for Plastic Products

用陶瓷型铸造金属型的效果

Effect of chill mold cast by ceramic mold

提高陶瓷型铸造铸铁浮封环合格率的研究

Elevation of the Yield of Floating Sealing Rings with Cast Iron in Ceramic Mold Casting

以磷酸铝为粘接剂的陶瓷型铸造

Ceramic Mold Bonded by Aluminium Phosphate

采用熔模、陶瓷型铸造工艺来制造小型水轮机叶片和水斗是一种最佳的选择。尤其对单机或小批量机组更为适用。

Investment cast and ceram cast are best technology for the fabrication blade and bucket of small turbine .

介绍了陶瓷型铸造制模的工艺过程和工艺特点，并指出了陶瓷型铸件常见缺陷及防止方法。

Introduced molding process and characteristics of ceramic die-casting technology , and pointed out prevention for the ceramic die-casting common defects .

磷酸盐粘结剂用于陶瓷型艺术铸造

Application of Phosphate Bonding Agent to Art Casting in Ceramic Mold

镁合金陶瓷型精密铸造工艺及组织性能研究

Study of Ceramic Decision Casting , Microstructures and Properties of Magnesium Alloys

陶瓷型精密铸造法制造金属模具的探索

Study on Metal Die Manufacturing Basing on Ceramic Casting

负压浇注在陶瓷型精密铸造子午胎模具中的应用

Application of Negative Pressure Pouring in Ceramic Precision Casting of Radial Tire Mould

快速原形制造技术与陶瓷型精密铸造相结合是目前金属模具快速制造的有效方法。

Combining Rapid Prototyping with Manufacturing Technology for Ceramic Mould in Investment Casting is an effective method for rapidly making metal die .

直接利用激光快速成型的原型树脂模，结合陶瓷型精密铸造技术，制得了高精度、低表面粗糙度、高使用寿命的钢模具。

The steel dies with high dimensional accuracy , low surface roughness and long service life have been quickly produced by using prototyping resin molds as patterns of ceramic investment casting .

本论文对基于反求工程和快速原型技术的陶瓷型精密铸造快速模具、石膏型铸造锌合金快速模具、金属粉末填充环氧树脂快速模具制造技术作了详尽的理论和实践的研究。

The paper make full research on the theory and practice of the rapid tooling technologies using ceramic precision casting 、 plaster casting and metal powder filled epoxy resin based on RP and RE .

该系统采用非线性有限元对凝固过程中铸件的尺寸精度进行数值模拟，通过动态信息反馈优化原型尺寸，详细介绍了无焙烧陶瓷型精密铸造技术的工艺及机理。

The dimensional accuracy of solidification processes was numerically simulated using the nonlinear FEM with the RP prototype dimensions optimized by dynamic information feedback . The process and mechanism of the unbaked ceramic casting mod process were introduced in detail .

本文通过对快速制模与精密铸造结合的工艺进行分析对比，并对采用陶瓷型精密铸造来快速制模的工艺过程进行了探讨，总结了陶瓷型精密铸造工艺过程中影响尺寸变化的因素。

The combination process of rapid tooling and precision casting technology is studied , and each process arrangement is compared , at last the rapid tooling method adopting ceramic precision casting technology is analyzed , and the influencing factor on dimension deviation during the ceramic precision casing process is found .

对TiAl合金涡轮的立式离心熔模陶瓷型壳精密铸造进行了研究，合金熔配设备为水冷铜坩埚真空感应熔化炉。

Vertical centrifugal casting of TiAl alloy blade casting in an investment shell was investigated . The Ti Al alloy melt was produced by induction skull melting .

陶瓷型壳精铸挤压铸造成型模

Shaped Die Manufacturing for Squeezing Casting in Ceramic Shell Mold

研究了陶瓷型壳精铸挤压铸造成型模的工艺过程、工艺特点以及工艺参数的选择等问题。

The technical process and characteristics as well as the selection of technical parameters related to shaped die manufacturing for squeezing casting in ceramic shell mold were investigated .