超低碳不锈钢

308m~3超低碳不锈钢球罐产品的设计

Design of 308m ~ 3 ultralow carbon Stainless Steel Spherical Tanks

超低碳不锈钢冷弯开裂问题的研究

Research on Cold Bend Cracking in Welding Joint of Ultralow Carbon Stainless Steel

本文介绍了以微碳铬铁、纯铁等原料在感应炉内，通过底吹Ar和适当供氧来冶炼超低碳不锈钢的试验研究。

The article states a test in the induction furnace for making super-low carbon stainless steel .

316L超低碳不锈钢埋弧焊焊接工艺探讨

Discussion on procedure for submerged are welding of 316L extra-low-carbon stainless steel

AOD炉冶炼超低碳不锈钢工艺探讨

Exploration for Melting Technology of Ultra-Low-Carbon Stainless Steel in AOD furnace

304L超低碳不锈钢板的振动时效

Vibratory Stress Relief for 304L Extreme Low Carbon Stainless Steel Plate

井成功地满足了上海钢铁研究所VOD炉精炼超低碳不锈钢多炉使用的要求。

They successfully met the requirements of Shanghai Iron Steel Research Institute to refine ultra low carbon stainless steel in VOD furnace with a service life of several heats .

配合前述研究的吹氩制度，在保证足够的脱硫钢渣界面反应动力学条件下，实现了采用EAFVODVCD工艺生产超低碳不锈钢的目标要求。

With the aforementioned study on argon system , under an adequate desulfurization slag interface kinetics condition , the production of ultra-low carbon stainless steel has achieved by EAF-VOD-VCD .

叶片用超低碳不锈钢冶炼技术

Smelting Technique for Extra-Low Carbon Stainless Steel Used for Blade Lever

超低碳不锈钢管-管板的焊接工艺试验与应用

The Test and Application of the Ultra-low-carbon Austenitic Stainless Steel Pipe

用感应炉冶炼超低碳不锈钢

The making of super - low carbon stainless steel with induction furnace

超低碳不锈钢铬成分的控制

A Control of The Chromium Content in Super-Low-Carbon Stainless Steel

超低碳不锈钢三角丝生产工艺研究

The Research on Super Low Carbon Stainless Triangular Steel Wire Production Technology

核安全一级阀超低碳不锈钢锻件研制

Development of Ultralow-Carbon Stainless Steel Forgings for First Class Nuclear Relief Valves

超低碳不锈钢冷轧（拔）无缝钢管生产工艺改进

Improvement on cold-rolling ( drawing ) process for extra-low carbon stainless steel seamless tube

低碳、超低碳不锈钢推广应用会议

The meeting for spreading and application of low carbon and ultralow carbon stainless steels

超低碳不锈钢的铸态局部腐蚀行为研究

Study on the local corrosion behavior of cast stainless steel with ultra low carbon content

超低碳不锈钢管应用于高压空气管道的适用性试验

The suitability test for high pressure air pipe line made of super low-carbon stainless steel

介绍了一种特殊超低碳不锈钢阀体的试生产工艺过程。

Trial cast process of a kind of special extra-low carbon stainless steel Valve body was introduced .

开发难熔金属来替代超低碳不锈钢作为乏燃料后处理设备用材料已成为后处理设备用材料的发展方向。

It is reprocessing facility material development way that exploiture refractory metals replace extra-low-carbon stainless steel as spent fuel reprocessing facility material .

在冶炼超低碳不锈钢时，铬合金加入量大，成分极不易控制。

During smelting the super-low-carbon stainless steel , the adding mass of chromium alloy is very big , and the component control is very difficult .

介绍了为开发研制的新型汽车尾气净化器用奥氏体超低碳不锈钢焊管，阐述了该产品的主要技术要求、采用标准及研制中的工艺流程、材料、真空退火等关键技术。

This article introduces the austenitic low carbon stainless pipe used in new kind of car caudal gas clarifier . It describes the main technical requirements , adopting standard and the key techniques of process , material , vacuum anneal .

生产100吨钢水以上铸件需要多罐合浇，所以在福鞍重工现有的设备基础上完全可以建立最多为四罐的多罐合浇生产超低碳不锈钢大型铸钢件的生产工艺模式。

Need to produce 100 tons of castings poured more cans together , so the saddle casting industry in blessing on the basis of existing equipment can create up to four cans of multi-tank co-production of ultra-low carbon stainless steel pouring large castings production process model .

采用AOD和VOD精炼法生产低碳、超低碳奥氏体不锈钢是新的进展和进一步发展的方向。

Using AOD and VOD refining method of production low carbon , ultra-low carbon austenitic stainless steel is the new direction of progress and further development .

原填料质量存在问题，不锈钢填料的含碳量未达到超低碳316L不锈钢的标准。

The original packing material has the problem of quality , the carbon content of the stainless steel packing has not reached the standard of the ultralow carbon 316L stainless steel .

选用超低碳奥氏体不锈钢焊条A042A.采用焊条电弧焊焊接316L／20g复合管的第1层焊缝，盖面层的焊接选用J507焊条。

Shielded metal arc welding and super-low carbon austenitic stainless steel electrode are used to the welding process on the 1st layer of weld metal of 316L / 20g compound pipes and construction steel electrode are used to cosmetic welding .

采用TIG焊和超低碳奥氏体不锈钢焊丝TGS-309L焊接20/0Cr18Ni9复合管的过渡层焊缝，焊后利用金相显微镜和扫描电子显微镜对焊接接头进行了分析研究。

TIG welding process with TGS-309L super-low carbon austenitic stainless steel welding wire is used on the transitional layer of the weld of20 / 0Cr18Ni9 compound pipes . After welding , the welded joint is analyzed and researched by metallurgical microscope and scanning electron microscope .

我国低碳、超低碳奥氏体不锈钢的主要进展

Development of low and extra-low carbon austenitic stainless steel in China

反复焊接对超低碳奥氏体不锈钢耐腐蚀性能的影响

Investigation of the effect of rewelding on anti-corrosion properties of ultra-low carbon austenitic stainless steel

超低碳奥氏体不锈钢带极电渣堆焊接头的熔合区特征

Bond area characteristic of joint strip electrode electroslag surfacing using ultra - low - carbon austenitic stainless steel