接线盒

jiē xiàn hé
  • main junction box;ceiling rose
接线盒接线盒
  1. 银汞材料与MTA材料作为根尖倒充填材料的临床效果评价接线盒材料电缆套管填充剂

    A retrospective clinical study of amalgam and mineral trioxide aggregate as root-end filling materials joint box compound

  2. 传感器内已经集成了一个RS485接口,即总线不需要额外的接线盒。

    An RS485 interface is already integrated in the sensor housing , i.e.an additional box for the bus connection is not required .

  3. 下面的例子使用了两个DIV元素对两段文字进行了不同的对齐处理。安装喇叭继电器:将继电器端子与接线盒中的插孔对齐,插紧继电器。

    This example uses two DIV elements to align two sections of text differently . Install the horn relay by aligning the relay terminals with the cavities in the junction block and pushing the relay firmly into place .

  4. 文章对YBK系列电动机和YBK2系列电动机接线盒的规格进行了比较,介绍了YBK2系列电动机接线盒的设计特点,最后给出设计方案。

    It is presented that the design features of terminal box for Series YBK2 flameproof three-phase induction motor , comparing with Series YBK and a design proposal is given in this article .

  5. 安装所有卖方供应的仪器接线盒和现场面板。

    Install all vendor supplied instrument junction boxes and field panels .

  6. 隔爆壳体的设计研究新型隔爆接线盒结构

    Designing of flameproof shell body New Construction of Flame-proof Terminal Box

  7. 高压铠装电缆中间接线盒的设计与使用

    Design and Use of Connected Box for High-pressure Steel Clad Cable

  8. 检查各防爆接线盒是否有损伤和残缺情况。

    Check if explosion proof junction boxes are damaged or missing .

  9. 各组均连接到一个8引脚接线盒上。

    Each byte is connected with an 8 pin terminal block .

  10. 昌河福瑞达中央电气接线盒电路板的设计

    Design of PCB in Central Electric Junction Box on CHANGHE Vehicles

  11. 塑管接线盒注射模设计

    Design of Injection Mold for the Plastic Tube Junction Box

  12. 接线盒应密封,防止雨水进入。

    The junction box should be sealed to keep it from rainwater .

  13. 接线盒上盖逆向工程技术研究

    Research on reverse engineering of the terminal upper - cover

  14. 外壳的安装包括面板和接线盒。

    Installation of enclosures , including panels and junction boxes .

  15. 为插入插头而设计的接线盒插座。

    An electrical connector socket designed for the insertion of a plug .

  16. 镇流器、接线盒由用户选择。

    The ballast and junction box is selected by user .

  17. 减小井下防爆电机接线盒尺寸的措施

    Means to Reduce the Electrical Terminal Box Size of Underground Explosion-proof Motors

  18. 这个系列的接线盒适用于牵引和连接电线。

    The boxes of this series are used for pulling and joining conductors .

  19. 圆形管道风机系列主要由外壳、叶轮、电机和接线盒组成。

    Consist of housing , impeller , motor , base and connection box .

  20. 接线盒材料电缆套管填充剂有聚焦结的光缆连接器

    Joint box compound optical cable connector with focusing junction

  21. 所有热电偶应在锅炉套外接线盒中终结。

    All thermocouples shall be terminated in junction boxes outside the boiler casing .

  22. 增安型高压电机接线盒的设计

    Design Considerations in the Terminal Box of Ex ' e ' High Voltage Motor

  23. 制造并安装所有仪表、仪表位置和接线盒的标识牌。

    Fabricate and install nameplates for all instruments , instrument locations and junction boxes .

  24. 隔爆型三相异步电动机定子测温接线盒的设计

    Design on Terminal Box of Stator Temperature Measuring Device for Flameproof Three-phase Induction Motor

  25. 增安型变频调速三相异步电动机的设计增安型高压电动机的保护及其接线盒设置

    The Protective Device of the Increase-safety High-voltage Motor and the Set of Its Terminal Box

  26. 电缆接入防爆接线盒的方式的详细数据;

    Detailed data about the way to connect power cable into the explosion-proof junction box .

  27. 镇流器,接线盒及灯杆高度可由用户选择;

    The ballast junction box and the high of lamp-post can be matched by users'choice ;

  28. 这种热水器应该配置一个外置的,位于上部的电气接线盒。

    The unit shall be equipped with an external , top located electrical junction box .

  29. 本实用新型主要用于电动机接线盒的监控。

    The utility model is mainly used for monitoring the junction box of an electric motor .

  30. 配电盘、接线盒和电源插座都应当是可随时使用的,不宜受其它对象阻塞。

    Electrical panels , junction boxes and outlets should be readily accessible and free from obstruction .