对振动

介子态的对振动模型

The pairing vibration model of meson States

关于对转动与对振动

On " pairing rotation " and " pairing vibration "

采用ANSYS软件对振动网孔雾化器的模型进行了静力、模态和谐响应分析。

Static , modal and harmonic analysis are used to analyze the vibrating mesh nebulizer in ANSYS .

通过对振动曲线进行分析处理总结出PSD传感器在振动测量领域有着广阔的应用前景。

After a series of experiment we can draw a conclusion that the PSD sensor have a wide application prospect in vibration measure field .

结果显示最优搜索的ICA算法运行效率高，信号分离纯度好，对振动信号有高效的降噪作用，并利用小波包分解准确地检测出振动信号中的碰摩信息，其效果优于小波分解法。

Simulation results show that the modified ICA algorithm is effective on denoise of vibra signal , and wavelet packet decomposition may provide richer early rub impact fault information than wavelet decomposition .

对振动时效（VSR）处理过程进行应变监测，提出工件在VSR处理前、后残余应力的测试方法和计算公式，并对一焊接钢结构VSR处理的效果进行了评定。

The strain-gage method for measuring strain during the vibration stress relief ( VSR ) process and the formulation of calculating the residual stress are proposed in this paper . The effectiveness of a welding component after VSR process is evaluated .

通过对振动流化床（VFB）干燥装置中传热与传质过程的分析，建立了物料在其中的干燥特性模型，得到了振动流化床干燥装置物料出口含湿量与温度的计算公式。

The mathematical model of drying property in VFB dryer is established on the basis of analysis of heat and mass transfer in drying process . The formulas to calculate the exit moisture content and temperature of drying material are derived .

弹簧质量对振动的影响

The effect of mass on the vibration of a spring

对振动噪声的控制已经得到越来越多的关注。

More emphasis was placed on vibration and noise control .

爆破振动频率对振动效应影响的试验研究

Experimental Research on Influence of Blasting Vibration Frequency on Its Vibration Effect

相位差对振动钻削影响规律的研究

Research on Influence Laws of Phase-Difference to Vibration Drilling

激振频率对振动凝固铸件残余应力的影响

Effect of Exciting Frequency on the Residual Stress of the Vibrating Solidification Casting

对振动的工艺参数和动力学特性进行了分析。

The technology parameters and dynamics performance are analyzed .

结蜡对振动管式密度计测量精度的影响

Paraffin Deposit Affects the Precision of Vibrating Densimeter

混合物入选体积量对振动流化床分离特性的影响

The Effect of Volume Fraction of Mixture on Separation Characteristics in Vibrated Fluidized Beds

振动振幅对振动焊接试件的焊缝及热影响区的金相组织影响较大。

The mechanical vibration welding had larger effect on the microstructure of weld and HAZ .

利用编制相应的计算机程序系统，对振动和声特性的系统分析，为了解损伤结构的特点，进一步研究损伤结构的识别提供了必要的储备。

A program system has been developed and utilised for the analyses of vibration and acoustics .

对振动钻削加工过程监控系统及监控用扭矩传感器进行了分析研究，提出了对监控用扭矩传感器的技术要求；

A monitoring system for vibration drilling is described . The technical requirements onthe torque sensor are made .

通过对振动现象及有关数据的分析，详细阐述了振动的诊断及处理。

The diagnosis and treatment of oscillation are detailed through the analysis of oscillation phenomenon and the associated data .

文章介绍了用Pro/E软件对振动筛进行参数化设计、开发专用振动筛设计程序的方法。为提高振动筛的设计效率、推出新产品提供了强有力的支持。

This paper introduces a programming method of parametric shale shaker design to superpose the center of force and mass .

计算中考虑了氢轻质量引起的非谐效应对振动频率的贡献，使计算结果更加精确。

Anharmonic effect on the vibrational frequencies , caused by the light quality of hydrogen , was taken into account .

还研究了两种激励的关系及其对振动特性的影响规律。

The relationship between two frequencies and the influence of it on vibration characteristics of PM motors have been investigated .

本文完成了对振动环境实验系统的数值仿真研究和实验验证研究。

The numerical simulation of the adaptive inverse control on a vibration system is accomplished , so is for experimental confirmation .

讨论了温度变化、壁面原子间的匹配程度对振动特性及振动过程中能量耗散的影响，根据能量的消耗来计算管壁间的摩擦力的大小。

The influence of system temperature and atom commensurate situation on vibration characteristic and energy dissipation in this process were analyzed .

铁路既有钢板梁连续化对振动抑制的研究

A Study of the Effects of the Continuation of the Existing Simple-supported Steel Plate Girders for Railways on the Suppression of Vibration

本文通过对振动攻丝加工特点的分析，提出省掉攻丝靠模的新方案.并从理论上证明了这一新方案的可行性。

By analyzing the features of vibration tapping , a new scheme without profile was given and proved to be feasible in theory .

对于电梯运行的各种工况下，文章对振动的响应都作了分析与计算，并对瞬时系统固有频率也作了计算分析。

Under four extreme working conditions , the dynamic response of elevator car and the natural frequencies of the instantaneous systems are calculated .

同时，本文的研究对振动筛的可靠性设计具有一定的参考和借鉴价值。

At the same time , this paper has a certain reference value for further studies on the reliability of the vibrating sieve .

对振动筛的筛面倾角、激振频率、振幅及激振质量矩等参数的选择问题进行了分析讨论。

Discusses and analyses the selection of parameters in slope angle of screen surface , excitation frequency , amplitude and mass moment of excitation etc.

对振动信号与噪声信号进行分析，得出钢轨振动主要频率段；计算振动加速度信号与噪声信号的相干系数，分析振动、噪声的相干性。

Analyse the vibration signal and noise signal to get the main vibration frequency range , and calculate the relativity between vibration and noise .