合成聚合物

hé chénɡ jù hé wù
  • synthetic polymer
合成聚合物合成聚合物
  1. 研究结果表明,AMPS和顺丁烯二酸之间的比例为3:1时合成聚合物的温度敏感性最差。

    Results shows that synthetic polymer has the lowest temperature sensitivity when the ratio of AMPS and maleic is 3:1 .

  2. 中原油田相继开展了CO2吞吐、N2驱、空气驱、合成聚合物驱、交联聚合物驱、微生物采油等项现场试验。

    Field tests have been made on CO2 stimulation , N2 drive , air injection displacement , synthetic polymer flooding , cross-linked polymer flooding and microbial oil recovery successively .

  3. 用于毛细管电泳DNA分离的合成聚合物

    Synthetic Polymers for DNA Separation by Capillary Electrophoresis

  4. 所合成聚合物的结构通过1HNMR光谱进行表征。

    The structure of the synthesized polymers was characterized by ' H NMR spectroscopy .

  5. 合成聚合物,特别是PP和PET为生产具有特殊性能的纤维提供了可能性。

    Synthetic polymers and in particular PP and PET , offer the possibility to produce fibers with specific properties .

  6. 合成聚合物对纤维素CAP、MA/CAP薄膜改性研究

    Study on the performance improvement of cap and ma / cap cellulosic films by blending with synthetic polymers

  7. 另外,DCS中碳水化合物的含量明显高于亲脂性抽出物与合成聚合物,而合成聚合物的含量相对比较低。

    Furthermore , the content of carbohydrate was much higher than that of lipophilic extractives and synthetic polymers .

  8. 利用DSC、TGA及TGA-IR测试分析了所合成聚合物的热学性质。

    TGA , DSC and TGA-IR analyses evaluated the thermal behavior of the synthesized polymers .

  9. 合成聚合物表面施胶剂AGP

    Synthetic Surface Sizing Agent AGP

  10. 并采用FTIR和1HNMR表征了各反应中间体、单体以及聚合物的结构,利用凝胶渗透色谱(GPC)测定了所合成聚合物的分子量及分子量分布。

    The structures of the intermediate , monomers and corresponding polymers were characterized by elemental analysis , FTIR and 1 H NMR . Molecular weight and MW distribution were calculated by gel permeation chromatography .

  11. 通过DSC、TG、红外光谱、荧光光谱等手段研究了合成聚合物的热稳定性,及结构与荧光性能的关系。

    The living energy of hardening reaction was obtained by DSC similarly . The stabilization of the synthesized polymer and the relation of structure and fluorescent function were represented by DSC , TG , infrared spectroscopy and fluorescent spectroscopy .

  12. 同时对比了不同疏水链长疏水单体所合成聚合物的特性粘度、Huggins方程Kh数值,及其耐温耐盐剪切稀释性、剪切恢复性能的影响;

    At the same time it has contrasted with characteristic viscidity , K_h numerical values of Huggins and their influence of capabilities of temperature resistance , salt resistance , dilution shearing and shear resume of polymers which are synthesized with different hydropHobic chains and long hydropHobic monomers ;

  13. 介绍了新型低损害合成聚合物压裂液体系,该压裂液体系采用的稠化剂FA-200A为几乎不含水不溶物的合成聚合物,体系的残渣少;

    A new type of synthetic polymer fracturing fluid with low formation damage is introduced in this paper . The gellant FA-200A used in this new fracturing fluid system is almost free of insoluble materials .

  14. 合成聚合物、固体润滑剂、添加剂等。

    Synthetic polymer , smoother , chemical additive and so on .

  15. 微乳液聚合法是合成聚合物复合材料的新方法。

    Microemulsion polymerization is a new method of preparing polymer composites .

  16. 新型合成聚合物重金属离子吸附剂及其吸附性能

    Novel synthesized polymer sorbents for heavy metal ions and its adsorption performance

  17. 苯乙烯&丙烯酸酯类合成聚合物在表面施胶中的应用研究

    Applied Research of Styrene Acrylic Ester Emulsions on Surface Sizing

  18. 双环戊二烯开环歧化聚合反应及合成聚合物性能研究

    Studies on ring-opening metathesis polymerization of dicyclopentadiene and properties of synthesized polymers

  19. 一种新型低伤害合成聚合物冻胶压裂液体系

    A Novel Low Damage Synthetic Polymer Gelled Hydrofracturing Fluid

  20. 植物油合成聚合物的研究进展

    Research Progress of Polymer Synthesis Based on Plant Oil

  21. 结果表明:苯乙烯&丙烯酸酯类合成聚合物是一种高效的表面施胶剂。

    The results show that the SAE is a high effective surface sizing agent .

  22. 合成聚合物在手性分离中的应用进展

    Research Progress in Chiral Separation Using Synthetic Polymers

  23. 通过表面引发原子转移自由基聚合,在材料表面合成聚合物刷,是改变材料表面特征的有效方法。

    The surface properties can be well controlled via surface-initiated atom transfer radical polymerization .

  24. 最好采用合成聚合物电线,这种线的绝缘性与橡胶一样。

    Make use of modern synthetic polymers have the same insulating properties of rubber .

  25. 本文评述了生物降解型合成聚合物的研究进展、结构特点和应用前景。

    The recent advances , structure characters and applications of biodegradable synthetic polymers are reviewed .

  26. 合成聚合物表面施胶剂的最新研究进展

    Development of Synthetic Polymer Surface Sizing Agent

  27. 简便方法生产合成聚合物胶粘剂

    Preparing Synthetic Adhesives with a Simple Method

  28. 喷雾反应合成聚合物微粉研究进展

    Progress in the Development of Spray Polymerization

  29. 所合成聚合物的电化学性质利用循环伏安法进行测定。

    The electrochemical properties of the synthesized polymers were examined using the cyclic voltammetry technique .

  30. 所合成聚合物的氧化还原行为被发现既不是可逆也不是完全不可逆。

    The electrochemical redox processes of the synthesized polymers were found neither reversible nor totally irreversible .