分析程序

fēn xī chénɡ xù
  • analysis program;analyzer;parser;analytic procedure
分析程序分析程序
  1. 对于每个非终结符号U,语法分析程序都有一个递归过程。

    The syntax analyzer has one recursive procedure for each nonterminal U.

  2. 这可能是有用的,如果你想保持一个日志在全立一个Web日志分析程序可以读,另一只用信息日志文件,你关心的就是当你掠过的条目。

    This can be useful if you want to maintain one log in CLF that a web log analyzer program can read and another log file with just the information you care about when you 're skimming the entries .

  3. 它调用分析程序分析一个名词短语。

    It causes the parser to parse an NP .

  4. 采用Matlab编制单导线的非线性分析程序。

    Nonlinear of single line is analyzed through Matlab programming .

  5. 在FORWARD测井解释软件中,多矿物模型分析程序应用组份分析原理,可以处理砂泥岩地层和复杂岩性地层的测井资料。

    Multiple minerals analysis program in FORWARD logging interpretation software can process logging data of shaly sand formation and complex lithology formation .

  6. 基于MATLAB的线性时不变控制系统频域分析程序设计

    MATLAB-Based Frequency Domain Analysis Programing for LTI Control System

  7. 利用有限元分析程序ANSYS对拱进行非线性分析,考虑结构屈曲前变形对临界力的影响。

    Nonlinear Finite Element analysis of arches was performed using FE software ANSYS .

  8. 采用两相流漂移通量模型的DRIFT系统分析程序

    A Network Analysis Computer Program DRIFT Based on Drift-Flux Model for Two-Phase Flow

  9. 本文的目标不是开发一个通用的结构分析程序或结构CAD软件包。

    It is not a target of this paper to develop a general structural analysis program or structural CAD package .

  10. 基于Python语言的音频捕获及频谱分析程序设计

    Method of Audio Capture and Design of Spectrum Analysis Software Based on Python

  11. TurboProlog工具箱中语法分析程序生成器的初析

    Elementary Analysis on The Parser Generator in Turbo Prolog Toolbox

  12. 部分乙酰化聚乙烯醇的FTIR研究&谱图分析程序的应用

    FTIR STUDIES OF PARTIALLY ACETYLATED POLY - ( VINYL ALCOHOL ) & Application of Spectra Analyzing Programm

  13. 利用计算流体动力学(CFD)分析程序,对油水旋流分离器进行了计算与分析。

    Analytical program of computer fluid dynamics ( CFD ) is used to calculate and analyze the cyclone separator .

  14. MOS集成电路分析程序

    MOS Integrated Circuit Analysis Program

  15. 用LEX构造数控编译器词法分析程序的研究

    Research on the Construct of Lexical Analyzer of NC Compiler by LEX

  16. 笔者用MATLAB语言编写的一种符号电路分析程序,该程序具有极其简单的文本输入格式,能有效地进行电阻电路分析、正弦稳态分析和复频域电路分析。

    A symbolic analysis program is developed using MATLAB . This program has free format input . It can analyze resistive circuits , sinusoidal stead-state and s-domain circuits .

  17. 本文提出了一个能在SPICE通用电路分析程序上运行的模拟相乘器的实用化动态宏模型。

    A practical dynamic macromodel of analog multiplier suitable for the General Circuit Analysis Program SPICE is presented .

  18. 应用PC-1500微机进行露天边坡稳定性分析程序

    A PC-1500 microcomputer program for stability analysis of rock slopes

  19. 方法用Logistic回归分析程序和χ2检验,对305例急性硬脑膜下血肿患者的14项临床指标进行回顾性分析。

    Methods Fourteen clinical factors on 305 cases of acute subdural hematoma were studied retrospectively in this article with Logistic regression analysis and χ 2 test .

  20. 本文建立了能直接用于SPICE电路分析程序中的PET-GP模型。

    PET-GP model has been set up which can be used directly for the analytical program in SPICE circuit .

  21. 然后采用Ansys有限元分析程序对大桥的动力特性进行了分析,获得了大桥的自振频率和振型。

    The dynamic behavior of the Bridge is then analyzed with finite element program Ansys , and the free vibration frequencies and modes of the Bridge are thus obtained .

  22. 方法之一是根据噪声分析程序提供的时域波形数据文件,通过格式处理形成WAV文件,然后在声卡上播放。

    One is sounding by using sound Blaster and programming WAV sound file .

  23. 文章介绍了一种针对模拟/数字转换器(ADC)的动态性能参数设计的灵活易用的分析程序。

    An analytic procedure for measurements of dynamic parameters of analog-to-digital converters is presented , which is based on the method of spectrum analysis using FFT .

  24. 裂区试验设计Casiofx-4500p分析程序

    Split Plot Experiment Design by Analysis Programme of CASIO fx-4500p

  25. 本文对分别在芸薹属作物与向日葵中开发的SRAP、TRAP标记系统的基本原理与分析程序进行介绍。

    The principle and protocol of SRAP and TRAP , which were developed in Brassica and Helianthus crops firstly , are introduced in the paper .

  26. 采用VC与MATLAB语言混合编程及引擎调用技术,编制了五自由度上肢的运动分析程序,并对该模型进行了合理性分析。

    Using the skills of program mixing VC and MATLAB and engine transfer , a kinetic analysis program of the five-degree-of-freedom upper limb was set up . And the reasonable analysis was carried out .

  27. 以水稻杂交组合多蘖矮×中花11的F2群体597个植株株高和分蘖数为例演示了分析程序。

    An example of the plant height and the number of tiller of F2 population in rice cross Duonieai × Zhonghua 11 was used in the illustration .

  28. 基于弹性地基有限元法,利用等效文克尔弹性地基梁模型,采用模块化处理方式模拟基坑开挖的各种影响因素,编制C语言有限元分析程序对围护结构进行分析计算。

    Based on the principle of finite element method on elastic foundation , using equivalent model of winkle beam on elastic foundation , a computing program has been programmed by turbo C. And modular simulation is adopted for simulating different factors to affect the excavation .

  29. 作为一种专用的编译工具,LEX的源程序简单,编译后生成的词法分析程序效率高。

    Being a special compile tool , the source program of LEX is simple . The compiled lexical analyzer constructed by LEX has high efficiency .

  30. 介绍基于PSPICE电路分析程序的自动优化设计系统及其在对数视频放大器设计中的应用和实验结果。

    The automatic optimal design system is based on the circuit analysis software-PSPICE . In application , a video log amplifier is designed and the results are presented .