编织物

用一个漂亮的银色编织物盘在头顶。

Silver braid coiled round on top of her head .

实验结果表明，冷等离子体处理提高了碳纤维表面活性、浸润性，从而改善了碳纤维缝编织物/环氧复合材料的界面粘结性能，进而改善了复合材料的界面性能。

Results show that cold plasma treatment improves the surface polarity and impregnation of carbon fiber , which increases the bonding property of carbon fiber braid / epoxy composites , and therefore improves interfacial properties of composites .

双针床经编织物CAD软件的开发

Development of CAD Software for Double Needle Bar Warp Knitted Fabric

提花经编织物纹织CAD系统

CAD System for Jacquard Warp - knitted Fabrics

提花经编织物纹织CAD系统弹性网为针织物的弹性非织造布探讨

CAD System for Jacquard Warp-knitted Fabrics Discussion on Elastic Nonwovens with Warp-knitted Elastic Web

MATLAB在经编织物几何特性探讨中的应用

The Application of MATLAB in the Exploration of the Geometric Features of Woven

编织物CAD系统中最重要就是编织物模拟技术。

The most important composition of Fabric CAD system is the technology of fabric simulation .

碳纤维编织物中真空浸渍引入SiC微粉的工艺研究

Introduction Process of SiC Fillers into Carbon Fiber Preform by Vacuum Infiltration

文中从三维编织物的编织工艺入手，得到编织复合材料的几何结构，建立了织物纱线构造模型（FAM-FabricArchitectureModel），进而分析其力学性能；

The research in this dissertation began with braiding process of three-dimensional textile perform . A new fabric architecture model ( FAM ) was set up .

双向载荷下PVC涂层双轴向经编织物有限元分析

Finite element simulation of PVC coated biaxial warp knitted fabric under biaxial loads

编织物CAD系统是最近20多年来迅速发展起来的一门综合性计算机应用技术。

Fabric CAD system have been developed for more than twenty years since late 1970s as an all-around used computer technology .

基于VRML的矩形截面三维编织物虚拟设计

Virtual design of 3D rectangular braided fabric based on VRML

采用聚硅氧烷（PSO）先驱体浸渍裂解工艺制备出碳纤维三维编织物增强SiOC复合材料（3D-BC（？）

Three-dimensional braided carbon fiber reinforced silicon oxycarbide composites ( 3DB C_f / Si O C ) were fabricated via polysiloxane infiltration and pyrolysis .

OWL程序设计与多梳栉经编织物花型计算机辅助设计

OWL Programming and Computer - aided Pattern Design of Multi - bar Warp Knitting Fabric

这一合作带来了一款灯罩设计-“风雨晴”（comeraincomeshine）其特点在于传统的刺绣加上一组绳索编织物环绕在一个圆形金属框架上。

The collaboration resulted in a lampshade design come rain come shine that featured traditional embroidery and rope-work set around a circular metal frame and Boontje asked Artecnica to produce it commercially .

叶片用经编织物的厚铺层结构渗透性能及LCM成型工艺研究

Study on the Permeable Property of Warp Knitted Fabrics with Thick-Section for Wind Blade and LCM Process

RSJ系列贾卡经编织物的开发与设计

Development and design of RSJ series of jacquard warp knitted fabrics

首先从编织物的结构中提取出三种基本编织结构：Knit、Tuck、Welt，并对这三种结构进行模型构造；

First , abstract three base structures form the fabric : Knit , Tuck , Welt , then build the model of them .

本文针对三维编织物的特点，研究出适于三维复合材料RTM成形工艺的树脂体系。

On the basis of the characteristic of the three dimention fabric , the paper investigates resin systems of the RTM processes , which mould the three dimention composite .

研究了2.5D编织物的复合成型工艺，制作试件并通过实验值与理论预测值的对比，验证了该方法的正确性。

The correctness of this method was demonstrated by investigating the molding process of2.5D braided fabrics , making test pieces and comparing the experiment results and theoretical predictions .

为缩短先驱体浸渍裂解制备炭纤维三维编织物（3D-BCf）增强SiC陶瓷基复合材料的工艺周期，在3D-BCf中采用超声浸渍法预先引入SiC微粉。

SiC fillers were introduced into three-dimensional braided carbon fiber preform (( 3D-BC_f )) by ultrasonic infiltration in order to shorten the fabrication cycles of C_f / SiC composites through precursor-infiltration-pyrolysis ( PIP ) .

炭纤维平纹编织物和炭纤维Z-pin制备的预成型体，通过化学气相渗透（CVI）工艺制成Z-pin增强平纹编织陶瓷基复合材料。

A preform consisting of plain woven fabric and Z-pin through thickness reinforcements was prepared . The process of chemical vapor infiltration ( CVI ) was used to fabricate the ceramic matrix composite with Z-pins .

多层双轴向纬编织物及其性能研究

A Study of Multi-layered Biaxial Weft Knitted Fabric and its Properties

压纱型多梳经编织物设计方法探讨

Discussion on the design method of fall plate multi-bar warp-knitted fabric

三维五向管状编织物的几何建模及纤维体积百分含量预测

3D Five-Direction Tubular Braided Composites Geometric Modeling and Fiber Percentage Prediction

三维编织物的计算机仿真系统研制

Development of Computer Simulation System for 3 - dimensional Braided Fabrics

四步法矩形组合截面三维编织物的细观结构

Microstructure of four-step 3D braided preform with complex rectangular cross sections

管状立体编织物的结构研究三维织物的编织技术

The Research of the Construction of 3D Tubular Braiding Preform

经编织物作为玻璃钢增强基布的发展前景

Development and Prospect of weft knitting fabric as reinforcing cloth in FRP

竹炭纬编织物的研究与开发

Study and development of the bamboo-carbon fiber weft knitted fabric