等离子喷涂

等离子喷涂工艺流程的PLC控制

Application of PLC Controller in the Plasma Spray Processing

介绍了一种采用PLC控制器对等离子喷涂工艺流程进行监控的应用实例。

To monitor the plasma spray processing by PLC controller , an application example has been presented in the present paper .

等离子喷涂过程的BP神经网络自适应控制

Adaptive Control of Plasma Spraying Process Using BP Neural Network

等离子喷涂过程自动控制及PLC编程

Automatic controlling of plasma spraying process and PLC control program

激光重熔等离子喷涂Al2O3陶瓷层的相转变

Phase transformation of al_2o_3ceramic coating after plasma spraying and laser remelting

渗Al处理对低压等离子喷涂金属&氧化物扩散障作用的影响

Effect of Aluminizing on LPPS metal-oxide diffusion barrier

微束等离子喷涂工艺条件对Cu涂层组织和性能的影响

Effect of Spray Conditions on the Microstructure and Properties of Micro-Plasma Sprayed Cu Coating

基于CCD图像处理技术的等离子喷涂粒子温度研究

Investigation for particle temperature in plasma spraying based CCD imaging monitor technology

等离子喷涂设备的PLC自动控制

PLC automatic control of plasma spraying device

等离子喷涂Al2O3+TiO2复合陶瓷涂层的组织结构

Microstructure of plasma sprayed Al 2O 3 + tio 2 composite ceramic coating

等离子喷涂Al2O3/TiO2陶瓷涂层在液态石蜡润滑下的摩擦磨损性能研究

Tribological Behavior of Plasma Sprayed Al_2O_3 / TiO_2 Coatings under Liquid Paraffin Lubrication

HA生物活性陶瓷涂层的爆炸喷涂与等离子喷涂

Detonation gun spraying and plasma spraying on HA bioactive ceramic coatings

反应等离子喷涂TiN涂层热处理后力学性能研究

Mechanical Property of TiN Coating Prepared by Reactive Plasma Spraying after Heat Treatment

等离子喷涂Al2O3与Al2O3/TiO2涂层中的相变及涂层的耐腐蚀行为

Phase Transformation in Plasma-Sprayed Al_2O_3 and Al_2O_3 / TiO_2 Coatings and Their Anticorrosion Behaviors

等离子喷涂Cr2O3涂层显微硬度的工艺优化

Process optimization of microhardness of plasma sprayed cr_2o_3 coating

镁合金等离子喷涂Al/Al2O3涂层的组织与性能

Microstructure and properties of plasma-strayed Al / Al_2O_3 coating on magnesium alloy

反应等离子喷涂TiN涂层电化学腐蚀行为

Electrochemical corrosion behavior of reactive plasma-sprayed TiN coatings

等离子喷涂工艺稳定性对Cr2O3涂层结合强度的影响

Effects of fluctuations of plasma spraying parameters on tension bonding strength of cr_2o_3 coating

等离子喷涂及反应形成的AI2O3梯度耐热涂层的研究

Studies on the Plasma-Sprayed and Reaction Forming AI_20_3 Gradient Thermal Resistance Coatings

反应等离子喷涂TiN的反应过程及涂层形成机理研究

Study on Reacting Course and Forming Mechanism of TiN Coatings Prepared by Reactive Plasma Spraying

超声波振动车削加工等离子喷涂Al2O3+13%TiO2陶瓷涂层

Used Ultrasonic Vibration Cutting to Machining the Al_2O_3 + 13 % TiO_2 Ceramic Coatings by Plasma Spraying

等离子喷涂Al2O3与ZrO2复合热障涂层的高温性能

Thermal Behavior of Thermal Barrier Coatings Composed with Al_2O_3 and ZrO_2 Sprayed by Plasma

激光重熔处理对含Al、Ti、TiO2等离子喷涂热障涂层组织的影响

Effect of Laser remelting on Structure of Plasma sprayed TBCs with Al , Ti and TiO 2

利用等离子喷涂设备将Ti与羟基磷灰石（HA）的混合粉末喷射入水，采用扫描电子显微镜和X射线衍射仪研究了Ti+HA入水颗粒的形态和相组成。

The mixed titanium + hydroxyapatite ( HA ) powder was sprayed into water using a plasma spray equipment .

等离子喷涂WC涂层磨损机理研究

Studies on wear mechanisms of plasma sprayed WC Coating

低气压等离子喷涂TiO2涂层结构的研究

A study of the structure of low pressure condition plasma sprayed tio_2 coating

本研究分析了在低气压等离子喷涂条件下，TiO2涂层的结构受等离子弧喷涂过程中氧分解量所影响。

The structure of low pressure condition plasma sprayed TiO_2 coatings was investigated .

等离子喷涂TiO2涂层及其光催化性能研究

Plasma Spraying of TiO_2 Coatings and Its Photo-catalytic Property

等离子喷涂Al2O3陶瓷涂层的结构与组织特征

Structure of plasma sprayed al_2o_3 ceramic coating

用基于快速原型制模技术（RP）的等离子喷涂制模技术制造不锈钢模具。

The stainless steel rapid mold is manufactured by RP and plasma spray technology .