等离子发生器

采用涡耗散概念（EDC）模型，对等离子发生器内三维湍流燃烧流场进行数值模拟。

The eddy-dissipation-concept ( EDC ) model is used to simulate the three-dimensional combustion process in a plasma generator .

等离子发生器中流场的组织与电极冷却

Organization of Flow Field and Cooling of Electrode in Plasma Generator

RITS设计完成的用于医疗垃圾处理的等离子体炉包括垃圾自动上料装置、等离子发生器系统、主炉、尾气处理系统及自动控制系统共5部分。

The thermal plasma system used for the medical waste treatment , designed by RITS , consists of 5 parts : waste self-feeding unit , plasma generator system , main furnace , off-gas treatment system and automatic control system .

直流电弧等离子发生器射流脉动的研究

Studies on the Jet Fluctuation of DC Arc Plasma Torch

低温等离子发生器工作特性及实验研究

Working Principle Experimental Research on Non-thermal Plasma Reactor

等离子发生器中空气流场的数值分析

Numerical Analysis of Airflow Field in Plasma Generator

等离子发生器化学反应流场数值模拟

Numerical Simulation of Reaction Flow in Plasma Generator

等离子发生器空气流动数值模拟

Numerical Simulation of Air Flow in Plasma Generator

用湍流扩散燃烧的简单概率密度函数模型对等离子发生器燃烧流场进行了数值模拟。

Uses turbulence diffuse combustion and simply PDF model to numerical simulation plasma generator combustion flow .

建立了一个以局部热力学平衡、宏观电中性为基本假设的局部热力学平衡流体力学模型描述等离子发生器内部的流动、传热、传质过程；

A flow dynamics model is established to describe the mechanisms of processes in plasma generator .

等深流与等深流沉积等离子发生器化学反应流场数值模拟

ADVANCES IN THE STUDIES OF CONTOUR CURRENT AND CONTOURITES Numerical Simulation of Reaction Flow in Plasma Generator

有关分析结果可以近似地揭示等离子发生器内部的流场结构和各种形式能量之间的转换关系。

The flow structures and the transfer connections between different energies can be realized with the analyzed results .

三相交流等离子发生器

Three-phase AC plasma generator

直流高电压等离子发生器

DC high-voltage plasma generator

内置式空气等离子发生器能自动除湿干燥；所有的操作系统都可以通过控制面板来实现。

Built-in a Air-Unit which can dry automatically humidity and all operating system can be started in front side .

在此基础上设计制作等离子发生器和燃烧器进行了相关的实验研究。

Finally an experimental study is made to design and processes the plasma generator and the plasma ignition combustor .

可根据客户要求配备美国原装进口海宝等离子发生器和国产等离子发生器。

It could be equipped with Hypertherm plasma generator imported from America or plasma generator made in China as required by users ;

最后，对反应器的可行性进行了经济性分析，得出了将脉冲电晕等离子发生器用于空调系统中所耗资。

Then analyse feasibility of plasma reactor on economy and estimate requisite bankroll if we are going to apply it to condition system .

在数值模拟的过程中建立了等离子发生器的计算模型，并对其进行了网格划分、求解域和边界条件的设定。

In the process of numerical simulation , establishing the geometric model of plasma generator , and meshing it , setting solution domains and boundary conditions .

研制了用于尾气净化的低温等离子体催化反应器，该反应器由介质阻挡放电型低温等离子发生器和金属蜂窝载体催化剂组成。

Cold plasma-catalytic reactor for exhaust purification was developed , where the reactor was consisted by two parts including dielectric barrier discharge system and metal honeycomb substrate catalyst .

本文在对等离子发生器内部纯空气流场的模拟过程中，分析了不同进口气流角、不同进口总压以及不同气流压缩角对发生器电极壁面温度的影响。

The article analyses the influence to the generator electrode temperature from different inlet angle and inlet total pressure and the compressive angle of fluid in the situational process .

热处理等离子弧发生器的研究

Study on Plasma Arc Generator for Heat Treatment

论述了用于金属材料表面热处理的等离子弧发生器的工作原理、结构特点和参数设计。

The working principle , structure and parameters design of plasma arc generator for heat treatment are described .

简要介绍了等离子点火机理和等离子发生器工作原理。

Briefly introduced the plasma ignition mechanism , the plasma generator principle of work .

在等离子点火技术的研究过程中，等离子发生器以其过程机制复杂、尺寸空间小实验测量困难的特点成为等离子点火技术研究的重点。

In the process of study plasma ignition technique , the study of plasma generator is the most important work for its complex mechanisms of processes and too small space to observe by experiment .

等离子点火装置主要由等离子煤粉燃烧器和等离子发生器、冷却水系统、载体风系统、火检系统、电源系统、控制监测系统、冷炉制粉系统等部分组成。

It consists of pulverized coal burner and plasma generator , water cooling system , air carrying system , flame inspection system , power supply , control and monitoring system , cold-boiler pulverizing system , etc.

发动机的等离子点火系统中有一个重要部件就是等离子发生器。

There is a very important component in engine plasma ignition , its name is plasma generator .