测量显微镜

本文介绍由光学显微镜、电视摄象系统和微处理机组合而成的BCM5-1T型电视测量显微镜。

This paper presents a TV measuring microscope of Model BCM5-1T which consists mainly of an optical microscope , a TV camera system and a microprocessor .

圆锯片刀具角度测量显微镜

Measuring microscope for tool angles of wood working circular saw blade

用CCD改造测量显微镜及其在切削实验中的应用

Tool Microscope Rebuilt with CCD Vidicon and Application in Cutting Experiments

采用光学测量显微镜CCD图像采集微机数字图像处理。

The processing scheme : optical microscope-CCD camera-image grabber-digital image processing by personal computer are described .

方法：分别用4种模型材料制取10个同一金属实验模具的石膏模型，用测量显微镜测量金属模型和石膏模型上各标志点的距离，精度为0.001mm，所得数据进行统计分析。

Methods : Ten plaster replication models for each impression materials were made on the same metal master cast respectively , vertical and horizontal dimensions between landmarks on the masters and plaster casts were measured with an optical microscope . ANOVA was used to compare the measurements among the materials .

远离家，测量显微镜，在我的幻想里我什么都没有。

In my dreams I am not so far away from home .

用图像处理方法定量测量显微镜下切片中的组织和细胞

A method of measuring the cells and tissues of slices by image processing

利用测量显微镜开展激光束角漂实验研究光束法空中三角测量

Measurement of laser angle drift by means of measure microscope bundle aerial triangulation

用投影法测量显微镜的数值孔径

Measuring numerical aperture of microscope by projection method

分别采用显微拉曼光谱法及测量显微镜聚焦法测量了样品的热导率和厚度。

Its layer thick , thermal conductivity were scaled by metrical-microscope and micro Raman spectrum respectively .

用测量显微镜测量模型各标志点的距离，用布洛维硬度机测量模型表面硬度，所得数据进行统计分析。

The dimensions between landmarks were measured under microscope and the hardness was measured by hardness sclerometer .

复合光学测量显微镜

Compound optical measuring microscope

介绍了投影法测量显微镜数值孔径的实验原理，并给出了测量结果。

The projection method for measuring numerical aperture of microscope is introduced , and the measurement results are shown .

探讨全息照相光栅的光栅常数用测量显微镜、测角仪、夫琅和费衍射三种方法测量的特点与适用范围。

He characterists and available limits of three measuring methods , measuring microscope ( comparator ), spectrometer ( goniometer ) and Frauhofer diffraction , of holograph grating constant are discussed .

采用染料渗透实验，用测量显微镜测出染料渗入牙齿的深度。

All filled teeth were used for dye penetration test , and the depth that dye penetrated was measured between the restorations and the tooth structure under the metered microscope .

用硝酸法离析木纤维，标定后的测量显微镜下观察测量木材纤维长度，纤维宽度，纤维腔径，并计算壁腔比。

Nitric acid method with wooden fiber , calibration segregation of measuring the microscope measuring wood fiber length , width , fiber lumen diameter of fiber , and the calculating cellwall-lumen .

利用巴柯尔硬度计、工具测量显微镜、红外光谱仪等手段对制备的复合材料性能进行了分析，这为液体压力激波技术在纳米颗粒分散中的初步应用奠定了基础。

The performance of the nanocomposites was analyzed by the Barcol hardness meter , measuring microscope and infrared spectrometer , which laid the foundation for the application of the liquid shock wave .

光纤折射率剖面的测量（干涉显微镜法和近区场法）

Measurement of the Refractive Index Profile of Optical Fibers ( Interference Microscope Method and Near Field Method )

对样品进行了X射线衍射测量、扫描电子显微镜观察和X射线能谱微区成分分析。

The samples were examined by X-ray diffraction , scanning electron microscopy and X-ray energy dispersive spectrum .

用示差扫描量热法（DSC）、电阻测量和透射电子显微镜对Cu－Zn－Al－Mn合金高温时效的贝氏体相变进行了研究。

The bainitic transformation in Cu-Zn-Al-Mn alloys has been investigated by means of DSC , electrical resistance measurement and electron microscope .

本文报导了通过测量场发射电子显微镜（FEM）分辨率，来测定场发射电子枪亮度的新方法。与考虑了系统像差影响的球&锥面模型理论的计算结果进行了比较，二者结果基本一致。

A new method measuring the brightness of field emission electron gun by measuring the resolution of field emission electron microscope ( FEM ) is reported .

结合我们自己的工作，重点介绍了纳米电极在电化学反应动力学参数测量及扫描电化学显微镜（SECM）中的应用，并对其发展前景进行了展望。

We emphasize their applications in measurements of heterogeneous electron transfer rate constants and in scanning electrochemical microscopy ( SECM ) .

本论文以物理化学和结构力学等基本理论为基础，综合利用流变测量、DSC以及显微镜观察法对非牛顿含蜡原油溶胶与凝胶相互转化过程特性及机理进行了详细的研究和探索。

Basing on the theories of physical chemistry and structure mechanics , the properties and mechanism of sol-gel transformation for non-newtonian waxy crude oil were investigated in detail , using a combination of rheological methods , DSC and optical microscopy .

液中测量型原子力显微镜的研究

The Study on the Atomic Force Microscope ( AFM ) in Liquid

用于纳米级三维表面形貌及微小尺寸测量的原子力显微镜

Atomic Force Microscope for Nanometer 3D Surface Shape and Micro Size Measuring

将幼体和胚胎置于光学显微镜下进行观察和测量，并利用显微镜摄像头对其拍摄。

Larva was observed and measured with microscope and were photographed with camera .

本文利用霍耳测量、红外测量及透射电子显微镜等手段，对热处理CZ-Si中的新施主及氧沉淀进行了研究。

New donor and oxygen precipitate in CZ-silicon are studied by means of Hall measurement , IR measurement and TEM observation .