总体结构

系统总体结构设计，并用UML描述了顶层类图。

Overall Structure Design and Description of Top-Level Class Diagram .

论文的主要工作内容包括以下几个方面。首先，本文介绍了固态硬盘的总体结构及主控芯片FPGA的特点。

First of all , the article describes the overall structure of Solid State Disk and FPGA features .

研究了智能Agent的总体结构和功能；

The structure and functions of intelligent agent are studied .

系统总体结构设计时采用了C／S与B／S计算模式相结合的方式。

In the whole system frame design part , the C / S B / S-mixing compute mode is adopted .

本文还重点分析了GIS在作战指挥自动化中所能提供的主要功能，给出了GIS在作战指挥自动化系统中具体应用的总体结构组成图。

In succession most of the functions offered by GIS in campaign command automation is analyzed .

华宝空调器厂CIMS生产组织的总体结构与实现

Architecture and Implementation for production system in Hb CIMS

对该课程Web课件的设计与开发进行了探讨，综合运用了当今网络课件开发的新技术，规划了课件的总体结构、各模块功能和开发方案，为安全工程学科Web课件的开发提供参考。

How to design and develop it is presented in this thesis , and the structure , function , design ideas and developing schemes of this courseware are discussed too .

然后阐述了ERP系统中供应管理系统的需求分析、总体结构设计和主要功能设计；

The modules of system are expounded after requirement analysis , configuration design and main - function design in ERP system .

设计了系统的总体结构及组成模块，进行了硬件原理、GPRS模块接口和软件的开发。

The main structure and components were designed , and the hardware principle , GPRS module interface and software were developed .

介绍采用NUCLEUSPLUS和WinCE嵌入式操作系统的新型一体化故障录波器的原理、总体结构、软硬件设计及其特点。

The principles , structure and characteristics of a fault recorder based on Nucleus Plus and WinCE embedded operation systems is described .

在现有校园网络基础之上，提出了建立基于Web的多媒体教学网络平台的方案，并介绍了系统的设计思想、总体结构，分析了各个模块的功能、组成。

This paper presents a plan for building a multimedia teaching platform based on the Web of campus network and introduces its design idea ? overall structure and analyses the function and construction of each module .

在分析了现有的系统集成模式后，提出了基于MQSeries消息队列中间件的钢铁MES系统集成框架，构建了其总体结构模型。

After the analysis of common system integration model , this paper gave a Iron & Steel MES system integration framework based on MQ Series .

设计出了基于多Agent的远程教育系统模型和总体结构设计，对远程教学Agent的任务和功能进行设计，并讨论主要关键Agent结构设计。

The systematic model of distance education based on Multi-Agent and overall structural are designed , the task and function of distance education Agent are designed , and main key Agent structural is designed .

分析和设计了GPS数据预处理系统的体系结构，对系统的总体结构、系统的功能划分以及开发中采用的关键技术（如可视化技术、数据批处理等）进行了研究。

The structure of data pre-processing system for GPS observation was analyzed . General structure and function of system and some critical technology used in the system development are studied .

结合该模型，本文提出了基于虚拟地理环境的智能模拟系统的总体结构，并把系统分为显示跟踪模块、虚拟地理环境模块和Agent模块三个部分。

Combined with the SARS model , the paper brought forward the structure of the intelligent simulation system . The system is divided into three parts : viewer module , VGE module and Agent module .

首先提出了一种将Internet拓扑生成和路由协议实现相结合的思想，并基于此给出了IRES的总体结构。

A novel approach by combining Internet topology generation and routing protocol implementation is proposed , and the architecture of IRES is presented .

本论文分析了基于直扩的区域无线电导航系统的总体结构和工作原理，对区域导航中和定位精度有关的部分进行了研究，并利用matlab软件进行建模仿真。

This thesis analyzes the principle and architecture of area navigation system and investigates the problems related with positioning precision , which are modeled and realized with simulation tool , Matlab .

该ABS总体结构采用两通道三传感器结构方案，控制方法采用基于滑移率控制的模糊控制。

And it used the structure project with two channels and three sensors , and used the fuzzy control method based on the control of slip-ratio .

本文介绍了在Mach3.0微核心上通过多个服务器模拟UNIX操作系统的原理和总体结构。

In this paper the principle and the structure for simulating UNIX operation system by several servers on Mach 3 . 0 microkernel are introduced .

同时对OPC的基础&COM进行了剖析，阐述了OPC技术和COM的关系，给出了OPC数据访问远程服务器的总体结构、实现方法及具体实现过程。

In the end , the architecture and the implementation of a distributed remote OPC server based on Data Access specification are also provided .

介绍了模糊控制技术在水泥回转窑分解炉温度控制中的成功应用，并讨论了水泥回转窑生产过程DCS系统的总体结构和应用软件开发。

The application of fuzzy control for the decomposing furnace temperature of rotary cement kiln is introduced . Furthermore the general disposition and software development are discussed .

在分析瓦楞纸箱设计的过程和特点的基础上，提出基于CIMS的瓦楞纸箱CAD系统的总体结构。

The processes and characteristics of corrugated cardboard box design were analyzed , and the general structure of corrugated cardboard box CAD software based on CIMS was put forward .

UCAV编队对地攻击智能决策系统总体结构

Study on the Overall Structure of Intelligent Decision-making System of UCAV Formation Air-to-ground Attack System

对SIP协议做了简单介绍之后，接着对IP-PBX的总体结构做了分析。

After a brief introduction of the SIP protocol , it analyzes the overall structure of IP-PBX system .

根据GIS矿产资源评价数据结构流程及MARS系统的成矿信息的提取与综合的分析，进行需求研究，设计出矿产资源评价系统的总体结构。

According to data framework and flow of GIS evaluation , extraction and comprehensive analysis of ore-forming information of MARS , total framework of mineral resource evaluation system is designed .

介绍了个性化技术和个性化Web信息的采集技术，重点分析了个性化的Web信息采集模型，包括系统总体结构、用户兴趣的获取、个性化Web信息采集流程、个性化推荐的实现。

This paper introduces personalization and customized Web crawling technology . The customized Web crawling model is the emphasis of this paper , including the system architecture , describing users ' interests , customized Web crawling flow and the recommendation technology .

论文首先根据嵌入式系统的特点，借鉴传统组态软件的功能和结构，提出了嵌入式Linux下组态软件的总体结构。

Firstly this thesis provides the general framework of configuration software for Embedded Linux System according to the features of embedded system and borrowing ideas from the conventional configuration software 's function and structure .

讨论了无功优化的必要性和意义，以及电力SCADA系统的总体结构组成。

The main contents include : 1 . The necessity and the sense of reactive power optimization and the structure of power SCADA system were discussed .

建立了CAD／CAPP／CAM／PDM／ERP集成的信息模型和总体结构框架，给出了基于PDM平台的CAD／CAPP／CAM／ERP系统产品信息集成化管理的实现方法。

Information model and structure frame of CAD / CAPP / CAM / PDM / ERP information integration are established . The method of product information integration management based on PDM is pointed out .

在章动传动减速器的总体结构设计的基础上，进一步完成了基于Solidworks系统的双圆弧螺旋锥齿轮章动传动减速器实体的三维建模和整机虚拟装配。

On the basis of the whole construction of the reducer , the 3D modeling and virtual assembly for nutation drive have been completed in Solidworks system .