单件小批量生产

这种生产方式的生产特点是能够满足顾客多样化和个性化的需求，同时这个特点也造成单件小批量生产方式生产效率低、生产周期长、质量难以控制，以往的研究表明精益生产能够克服这些缺点。

This production mode has the characteristic of it well satisfy the customer diversification and personalized needs , but it also cause unit production low efficiency , long production period and quality is difficult to control .

单件小批量生产MRP算法改进及其应用

Improved Arithmetic and Application for Material Requirement Planning in Jobbing Work

通过对聚脂网生产工艺CAPP系统应用表明，该算法不仅适用单件小批量生产，而且适用于大批量生产，具有较好的推广性。

By using in polyester network production technology CAPP system , this algorithm is not only applicable small batches production , but also effective for large quantity production .

而最优生产技术（optimizedproductiontechnology，OPT）以其集中优先解决好主要矛盾的指导思想特别适用于单件小批量生产企业的生产计划和控制。

And the optimized production technology ( optimized production technology , OPT ) with its guiding ideology focus on priority to resolve the main contradiction is particularly applicable to the productive plan and control of small-volume productive enterprise .

针对CIM环境下单件小批量生产计划的大设备平衡这一核心问题，研究并实现了一种基于CPM与专家经验相结合的PPCES专家系统。

A PPCES based on CPM and expert experience to the key question of critical devices balance on CIM is studied .

在对传统物料需求计划主要计算模型分析比较的基础上，提出了单件小批量生产环境下物料需求计划改进算法&伸缩式MRP算法；

On the basis of relative analysis of primary compute models for material requirements planning , improved arithmetic for material requirements planning is put forward in little batch manufacturing mode ;

对于易受市场影响的多品种单件小批量生产型企业，制造执行系统（MES）作为连接企业计划管理层和底层生产控制的桥梁，其意义显得非常重要。

For manufactories of " much variety and little batch " are so easily influenced by outside market , MES is very important as a linkage between upper management level and workshop .

研究并解决了关键件的瓶颈工序MES作业车间调度问题的理论与方法，及其在单件小批量生产类型企业的应用。

Have studied and solved key bottleneck process deployment problem theory and method of homework workshop MES of one , and produce the application of type enterprises in batches small in single one .

通过分析某航空工装制造企业的能力需求计划现行模式以及存在的问题，结合企业多品种单件小批量生产的特点，开发并实现了在工装MES系统支持下的能力需求计划管理系统。

By analyzing the existing problems in a certain aviation equipment manufacturing enterprise , the CRP management system is developed and practiced in JIG-MES based on the features of the multi-categories and small batches manufacturing model .

ETO生产方式的主要特征是产品设计与工艺设计量大、零件种类多、单件小批量生产、生产周期长。

ETO production mode is of following characteristics : large amount of product design and process planing , high part variety , small batch production , long lead-time .

从结构相似产品单件小批量生产的特点出发，在综合约束理论（TOC）和其他传统计划方法的基础上，提出一套解决这类企业生产计划的方法。

According to the characteristics of similar single-piece and small-batch production , puts forwards a kind of new method for the production planning system on the basis of the theory of constraints and other traditional planning methods .

基于单件小批量生产的生产计划管理系统开发与应用

Development and application of planning management system based on job-shop production

单件小批量生产的车间作业调度研究

The research of job-shop scheduling based single unit job lot production

一种实用的单件小批量生产计划调度方法

A Practical Method for the Job Shop Planning and Scheduling

本文介绍了它在产品开发、模具制造、单件小批量生产中的应用。

This paper introduces its usage in production design , model manufacture .

与大批量生产相比，单件小批量生产方式具有约束多、变量多、计算复杂等难点，单件小批量生产调度问题已然成为当前学术界研究的热点问题。

Compared with mass production , One-of-a-kind production has more constraints , variables and calculation difficulties .

基于单件小批量生产企业的动态随机生产函数单件小批生产企业中协同产品商务系统的应用

Dynamic Stochastic Production Function of Manufacturing Enterprises under the Condition of Single Unit Job Lot Production

在离散型制造业中单件小批量生产是一种具有一般意义的生产类型。

The single piece and little batch production is a kind of general production type in discrete manufacture .

然而为了提高生产车间的敏捷响应能力和柔性，一些动态事件和扰动又是多品种单件小批量生产不可回避的。

However , some dynamic events and turbulences are inevitable in manufactories of " much variety and little batch " .

多品种，单件小批量生产已逐渐成为顺应市场产品发展趋势的主要生产方式。

The development of job-shop production featured more varieties has been gradually catering to the current market and inevitably becomes trendy .

分析了单件小批量生产模式下的产品报价特点，提出了客户订制目标向量等概念。

The characteristics of product quotation in jobbing work circumstances were analyzed , and the concept of customized target vector was proposed .

解释了单件小批量生产时配制配合的原理及其图样标注，并用一实例说明其具体设计方法和步骤，为大尺寸的孔和轴经济加工提供了一种设计方法。

Through a great number of experiments , the influences of the components to paste flow and concrete strength during RPC compounding were illustrated , at the same time , we discussed the mechanism .

以单件小批量生产的工业汽轮机为例阐述了一种面向生产准备的CAD/CAM集成化系统技术。

This paper , taking an example with the industrial steam turbine as a product in single piece or small-batch production , discusses the technology on manufacture preparation oriented integrated CAD / CAM system .

单件小批量生产在产品制造和管理方面不可避免的存在一系列问题，诸如生产成本偏高、生产效率低下，生产周期过长等。

However , a series of problems concerning production and management can also be caused by this kind of production , such as high production cost , low production efficiency , long production period and so on .

随着商品的多样化，多品种、单件小批量生产系统的比重越来越大，故本文以中小型企业作为研究的主要对象，对其制造系统的设施布置与优化模型设计进行相关研究。

With the diversification of commodity , varieties , single piece and small batch product of system is more and more greatly , so this paper takes the medium-sized enterprise as the main investigation subject to make the research about the facility layout and optimal model of manufacture system .

面向单件小批量的生产管理信息系统研究与开发

Research and Development of Manufacture Management Information System for Single and Mini-Batch Production

单件、小批量生产零件尺寸误差分布规律及其应用

The Distribution of Size of Parts in Single-part or Small-lot Production and its Application

单件和小批量生产控制系统

Single-piece and small-batch production control systems

客户需求的个性化和多样化促使了传统的大批量生产模式向多品种、单件小批量的生产方式转换。

Because of individuation and diversification of customers ' demands , manufacturing mode is becoming much variety and little batch .

发电设备是一种大型、复杂、钢结构的机械设备，其生产方式一般是单件或小批量生产。

The generating equipment manufacturing is mode of single or small-batch manufacturing with the features of large-scale , complex-structure and steel-structural machine .