冷轧带钢

介绍一套目前正在开发的冷轧带钢表面质量在线监测系统，该系统用于在线检测和识别冷轧带钢的表面缺陷。

A surface inspection system for cold rolled strips is introduced , which is used in on-line detection and recognition of surface defects on cold rolled strips .

最后分析乳化液中铁粉对冷轧带钢表面黑灰／黑斑缺陷的影响，并根据缺陷产生机理提出合理的控制技术。

Finally , the effect of iron particles on surface defects of the cold rolled strips were analyzed and reasonable control technology were proposed based on the mechanism of formation of defect .

自校正PID控制在冷轧带钢厚控系统中的应用

Application of self-tuning PID control in AGC system for cold-strip mill

X射线衍射法测量冷轧带钢残余应力

Measurement of Residual Stress of Cold Rolled Steel Strip by X-ray Diffraction Method

基于重复控制和鲁棒PID的冷轧带钢厚度控制系统

Cold rolled strip gauge control system based on repetitive control and robust PID

HC轧机在冷轧带钢中的应用

Application of HC Rolling Mill in Cooling Rolling Strip Steel Production

冷轧带钢工作辊弯辊和CVC位置的联合控制

Joint control of working roll bending and CVC position for tandem cold strip mill

蒲城电厂空冷超临界直流炉的EDTA清洗冷轧带钢电解清洗设备的设计与实践

Chemical cleaning with EDTA of supercritical air-cooling unit in Pucheng Power Plant Design and Practice of Electrolytic Cleaning of Cold Rolled Strip

分析了冷轧带钢厚度不均产生的原因、AGC控制系统存在的问题及智能技术的构成和应用前景。

This paper analyzes the reasons leading to uneven thickness of cold rolled strip steel , problems existing in AGC control system and component and application prospect of intelligent technique .

仿真实验表明，该控制器的控制性能远优于常规的PID控制器，为冷轧带钢厚度精度的提高提供了一种新的尝试。

The simulation experiments results demonstrate that the control performance of the controller is better then that of conventional PID-type controller . This is a new method to promote further improvement of thickness accuracy .

实验表明这些缺陷特征量对冷轧带钢表面缺陷的分类非常有效，该BP分类器识别率较高，在一定程度上解决了带钢表面缺陷分类难的问题。

Through the experiments , it proved that these features were extremely effective to the cold rolled steel surface defect classification and this BP classifier had high identification accuracy and resolved the difficulty of defect classification on steel strips surface to some extent .

为了提高冷轧带钢表面缺陷识别率，提出基于独立成分分析（ICA）的缺陷图像特征提取方法。

In order to improve the recognition rate of cold rolled strip surface defects , a new method of feature extraction was investigated for defect images based on Independent Component Analysis ( ICA ) .

解决宽幅罐箱用316L冷轧带钢表面重皮夹杂缺陷的工艺研究

Study of the Techniques to Eliminate the ' Double Skin and Inclusions ' Defect on the Wide Cold Rolled Strip Surface of the 316L Stainless Steel Used in the Container Trade

本文简要介绍冷轧带钢连续退火机组（CAPL）的概况及冶金学特点；

The outline and metallurgical characteristics of the continuous annealing and processing line ( CAPL ) for cold strip are briefly described .

设计了一种模糊控制器，该控制器结构简单，参数调整方便、快捷，将其与PI调节器结合组成智能型复合控制器，并成功应用于冷轧带钢的厚度自动控制（AGC）系统中。

A fuzzy controller is designed . The controller has a simple structure and its parameters are convenient and fast to adjust . Combined it with PI-type controller , there appears an intelligent multiple controller and applied in AGC system of cold continuous rolling mills .

现代冷轧带钢生产技术飞速发展，工艺与设备不断更新，新式除鳞设备、轧机、退火设备、多种联合生产线的出现及AGC计算机系统的采用，都极大地提高了冷轧带钢的质量。

With the rapid development of morden cold rolling strip prodution and renewal of technology and equipment , the quality of cold rolled strip are improved abruptly by use of new descaler , rolling mill , annealing equipment , sorts of combined production line as well as AGC computer system .

选择考虑冷轧带钢轧制过程变形区金属塑性变形和入、出口弹性变形的Bland-Ford-Hill模型作为冷轧过程控制轧制力模型并进行分析，确定出变形抗力和摩擦系数是影响轧制力最主要的两个因素。

The Bland-Ford-Hill model was used for rolling force calculation of process control of cold rolling . The plastic deformation in bite zone and elastic deformation at the entry and exit of bite zone were considered for the model calculation .

冷轧带钢连续热镀锌机组自动化系统

The automation system of Cold-rolled steel strip continuous hot-dip galvanizing line

自动板形控制在冷轧带钢生产中的实现

The Realization of Automatic Flatness Control on Cold Rolling Strip production

冷轧带钢连续退火模拟实验机的开发及其性能

Development of Continuous Annealing Simulator for Cold Strip and Its Performance

冷轧带钢的电解碱洗工艺及设备

Electrolytic alkaline cleaning processing and its equipment of cold rolled strip

冷轧带钢表面缺陷检测的信号处理

Signal Processing for Defect Detection of the Cold-Rolled Steel Strip Surface

冷轧带钢四辊轧机辊型研制

Roll 's Contour Research for 4-h Steel Strip Cold Rolling Mill

冷轧带钢退火粘结缺陷的研究

The Research for the Coherence Flaw of the Cold Strip Annealing

基于嵌入可信度的冷轧带钢缺陷检测

Defect Detection in Cold - Rolling Strip Based on Embedded Confidence

数字化脉冲燃烧技术在冷轧带钢退火炉的应用

Application of Digital Pulse Combustion Technology in Cold-Strip Steel Annealing Furnace

冷轧带钢轧辊轴承的使用分析

Use and analysis of strip steel roller bearing under normal temperature

冷轧带钢轧制力计算方法的比较

Comparison of the calculation methods for rolling force during cold strip rolling

冷轧带钢碎边导卫盒的改进

Improvement of the guide box of scrap chopper for cold rolled strip

冷轧带钢轧制力高精度快速仿真模型的研究

Accurate and fast simulation of rolling force model in cold strip rolling