热连轧机
- 网络Hot rolling mill;hot continuous rolling mill;Tandem Mill;hsm
![热连轧机](../cache/1332855.jpg)
-
GB/T15675-1995连续电镀锌冷轧钢板及钢带承钢1780热连轧机板型控制技术的应用
Continuously electrolytic zinc-coated cold-rolled steel sheets and strips Application of PFC Technology in Chenggang 1780 HSM
-
主要内容如下:(1)建立了热连轧机板形控制设定系统。
The main works were shown as following : ( 1 ) The strip shape set up system for HSM was established .
-
ASP热连轧机鼓式飞剪控制原理分析
Control Principle Analysis of the Drum Flying Shear of ASP Hot Continuous Rolling Machine
-
本钢1700热连轧机组R1轧机微机工况监测系统
Monitoring System for R_1 Rolling Mill Working Status of 1700 Hot Tandem Rolling Mill in Benxi Iron and Steel Company
-
提高PC热连轧机支撑辊寿命的优化曲线研究
Research on the optimal curve to enhance service life of the backup roll in the PC hot strip mill
-
考虑了轧辊交叉对轧制力的影响,建立了PC热连轧机轧制力计算模型。
Taking the influence of pair cross rolls into account , the rolling force calculation model of hot strip mills is established .
-
本钢1700mm热连轧机压力AGC控制思想的分析
Analysis of Pressure AGC Control Philosophy on 1700 mm Hot Strip Tandem Mill
-
热连轧机AGC系统的动态仿真
Dynamic Simulation for the AGC of Hot Strip Mills
-
针对板带热连轧机传统活套高度控制策略存在的问题,提出用模糊自适应整定PID的控制策略。
The fuzzy self-adaptive PID control strategy is used to replace the traditional loopers height control method on hot strip tandem mill .
-
珠钢CSP热连轧机张力控制系统分析
Analyzes tension force control system of GSP hot rolling in Zhujiang steel plant
-
CSP热连轧机振动性质的确定
Properties of the Vibration in CSP Hot Rolling Mill
-
由于PC热连轧机轧辊成对交叉,因而在变形区接触表面产生随交叉角变化的轴向力。
A changing axial force generated on the contacting surface of deforming zone results from the change in the cross angle of rolls during strip hot rolling .
-
在建立了热连轧机的非线性全量模型和线性增量模型基础上,分别构造了板形板厚解耦控制的非线性逆和线性逆解耦控制器,并用C语言编写了6机架仿真程序。
On the basis of building nonlinear complete model and linear derivative model , nonlinear inverse and linear inverse control of decoupling are constructed each other . C codes of 6-stands simulation are programmed .
-
从激光位移测量原理出发,介绍了DSP和CCD技术在热连轧机带钢平坦度在线测量中的应用。
Based on the theory of laser-distance measurement , this paper introduces the application of the DSP and CCD techniques in online flatness measurement of hot strip .
-
CVC热连轧机的板凸度计算模型
New Crown Setup Model of CVC Hot Strip Mill
-
论述了热连轧机厚度控制AGC技术的各种补偿功能以及绝对值AGC的实际应用效果。
This paper formulates the evolution of AGC technology concerning thickness control in hot strip mill , various retrieve function and the practical application effect of absolute AGC .
-
3号热连轧机采用紧凑式布局,主轧线R2~R3、R3~精轧机组可实现连轧。
The arrangement of No. 3 mill is compact and the continuous rolling is realized on R2 ~ R3 , R3 ~ finishing train .
-
950热连轧机生产1.8mm×800mm带钢的实践
Practice of Producing 1.8mm × 800mm Strip Steel by 950 Hot Tandem Mill
-
攀钢1450mm热连轧机自动宽度控制(AWC)技术
Automatic Width Control technique for 1 450 mm hot strip rolling mill in Panzhihua New Steel and Vanadium Co Ltd
-
将张力(或活套电流)与辊缝闭环的流量AGC应用到热连轧机上可以大大提高热连轧板带厚度精度,估计可达到±15μ。
Using tension ( looper electricity ) and flux-AGC of roller guage closed loop in hot continuous rolling machine can improve hot continuous rolling guage precision greatly , it is estimated that the precision can be ± 15 μ .
-
带钢热连轧机KFF-AGC系统的研究与应用
Development and application of KFF-AGC system in hot strip mills
-
本文对国内某钢铁公司采用热连轧机和可逆轧机所生产的X70管线钢进行了工业对比试验。
The industrial contrast experiment of X70 pipeline steel produced by hot tandem mill and reversing mill was carried out in a domestic certain iron and steel corporation .
-
分析了950热连轧机生产1.8mm×800mm薄带钢的技术难点,制定了详细的产品试制方案。
The technological difficulty of producing 1.8mm × 800mm strip steel by 950 hot tandem mill is analyzed and detailed trial scheme of the products is made .
-
宝钢1580热连轧机即采用了三菱重工的Mesta型油膜轴承及弹性结合锥套。
Bearing used on 1580 PC mill of Baoshan Steel Co. is Mesta oil film bearing and elastic force joint sleeve product by Mitsubishi heavy industries Ltd.
-
以莱芜钢铁公司1500mm热连轧机层流冷却系统为对象,对如何提高带钢卷取温度控制质量进行了研究。
Taking the laminar cooling system of 1 500 mm hot strip rolling mill in Laiwu Iron and Steel Co as an object , how to improve strip temperature control quality is studied .
-
本文对一多机架热连轧机精轧机组的液压自动厚度控制(A.G.C.)以及相应的活套及主传动控制间的相互影响进行了仿真研究,得到了一些实用并被证实有参考价值的结果。
The aim of this paper is to study the interactions between hydraulic automatic gauge con-trol ( A.G.C. ) and associated looper and main drive controls on multi-stand hot steel strip finishing mill . The study has been carried out by simulating the A.
-
热连轧机活套控制系统的研究与发展
The Hot Strip Tandem Mill Loopers Control System Study and Development
-
张力控制器在热连轧机架间的应用
The Application of the Tension Controller between the Hot-tandem Mill Frames
-
酚醛树脂复合板在热连轧机中的应用
Application of Aldehyde Resin Composite Plate on Hot Tandem Rolling Mill
-
对新建带钢热连轧机工艺方案的探讨
Discussion on the technical scheme of new hot strip production line