泡沫渣
- 网络foamed slag;foam slag;foaming slag;foamy slag
-
高炉粉尘造泡沫渣过程中FeO还原动力学的研究
Reduction Kinetics of FeO during Formation of Foamed Slag Using Recycled BF Dust
-
150t电弧炉泡沫渣的合理工艺
Rational Technique for Foamed Slag in a 150t Arc Furnace
-
泡沫渣中CO还原FetO的实验研究
Investigation on the reduction of fe_to by CO in foam slag
-
LF低氟泡沫渣精炼性能实验研究
Experimental study on refining ability of LF foaming slag
-
同时还提出了适合本厂精炼轴承钢的低碱度渣系组成,及LF炉埋弧泡沫渣组成。
For the refining of bearing steel , the use of the low basicity slag was suggested .
-
电炉粉尘造泡沫渣过程中FeO的还原与炉渣发泡行为
Reduction Rate of FeO and Slag Foaming on EAF Dust Recycling into the Furnace
-
研究结果表明,电弧炉良好的泡沫渣操作,钢水脱碳量ΔC大于0.6%可使钢中氮含量降到(10~20)×10-6。
The study results showed that the nitrogen content in steel decreased to ( 10 ~ 20 )× 10 - 6 by nice foaming slag operation and carbon drop Δ C in liquid steel more than 0.6 % .
-
渣中FeO还原反应速率常数与泡沫渣的最大发泡高度存在很好的相关性,还原速度增加,泡沫渣的最大发泡高度也随之提高。
The maximum slag foaming height increases with the increase of reaction rate constant of FeO reduction .
-
测定了在不同条件下,合成高炉渣中TiO2被碳还原时泡沫渣高度与时间的关系。
The relationship between the foam height and time is measured for foaming processes originated from reducing TiO 2 in the synthetic blast furnace slag under different condition .
-
20tEBT电炉喷粉造泡沫渣试验
Test of Making Foamed Slag With Injecting Powder in 20t EBT Electric Arc Furnace
-
40t钢包炉泡沫渣埋弧作业
Operation of Submerged Arc in Foamed Slag of Ladle Furnace
-
北方重工50tEBT超高功率电弧炉无富氧泡沫渣工艺
No-Rich-Oxygen Foam Slag Operating Procedure for a 50 t EBT UHP Arc Furnace at North Heavy Industry Group
-
高钨高硅电炉锡渣的相组成及形成机理研究70t电炉泡沫渣工艺技术的改进
A Study on Phase Composition and Process Mechanism of Electric Furnace Tin-slag with High W-Si Content
-
使用碳酸盐发泡剂在120t钢包炉上进行了泡沫渣埋弧加热试验。
The tests of submerged arc heating in foamy slag were conducted by the use of the carbonate foaming agent in 120t ladle furnace .
-
近年来,通过优化LF供电和吹氩等操作制度,采用预熔渣、泡沫渣的造渣技术等对此起到了一定的改进作用。
In recent years , some improvements regarding above problems have been made through optimization of the LF power supply and argon stirring system , application of the premelted slag , the foaming slag technology and so on .
-
炉渣碱度、泡沫渣高度、吹氧角度、补炉方式等是影响20t电弧炉炉衬寿命的主要因素。
Slag basicity , foamed slag height , angle of blowing oxygen and reline mode are the main factors influencing lining service life of 20t EAF .
-
当加热时间为11~15min时,泡沫渣埋弧加热的钢液平均升温速度提高了18.6%。
The average temperature rise rate of molten steel by means of submerged arc heating in foamy slag is increased by 18 . 6 % when the heating time is 11 ~ 15min .
-
70tDC-EAF炉泡沫渣技术的最新研究与实践
New Research and Practice of Foamy Slag in 70 t DC-EAF
-
电弧炉泡沫渣冶炼的进展和应用
The development of foaming slag steelmaking and its application in EAF
-
电弧炉的泡沫渣冶炼技术及应用
The Bubbly Slag Smelt Technology and Apply of Electric Arc Furnace
-
电炉熔氧期喷碳泡沫渣冶炼的工业性试验
Industrial test of slag foaming melting process in electric arc furnace
-
在普通功率电炉上采用两种不同类型的发泡剂,分别在熔氧期还原期进行泡沫渣冶炼。
The slag foaming smelting technology with two type foamers was experienced .
-
铁水脱硅过程泡沫渣的基本特征
Basic characteristics of foaming slag of hot metal desiliconization process
-
30吨电弧炉泡沫渣埋弧操作技术
Submerged Arc Process with Foaming Slag in a 30t Electric Arc Furnace
-
由于钢包精炼炉内的还原气氛,泡沫渣工艺中发泡剂的使用是必要的,课题研究中对常用的发泡剂进行了实验考察。
Foaming agent was necessary in ladle furnace because its reducing condition .
-
电弧炉泡沫渣埋弧冶炼的实践与探讨
Probing Practice in Smelting Foamed Slag by Submerged Arc Process in EAF
-
泡沫渣的孔隙度高。
The porosity of foaming slag is very high .
-
采用发泡剂的电炉泡沫渣炼钢工艺研究
Electric furnace slag foaming steelmaking with addition of foamers
-
铁水预脱硅中防止生成泡沫渣初探
Prevent slag from foaming in pre-desilication of hot metal
-
普通功率电弧炉泡沫渣系列发泡剂的研究
Study on foamer series for foamed slag of common power electric arc furnace