热连轧

在传统热连轧精轧机组温降模型基础上，开发了带钢热连轧终轧温度预报软件。

Software of forecasting finish rolling temperature for HSM was developed based on the traditional strip temperature dropping model .

简要介绍现代热连轧机组中辊道的结构组成及特点。

The article presents the features of the roller tables installed in HSM in terms of the construction and composition .

H∞扭振抑制控制器在热连轧机组上的应用

H_ ∞ Vibration Suppression Controller in the Hot Continues Rolling Mill Machine

热连轧卷取机踏步系统鲁棒H∞控制研究

Robust h_ ∞ control of step-by-step system for Coiler of hot continuous mill

带钢热连轧活套系统的H∞控制及仿真研究

H_ ∞ Control and Simulation Study for Looper System of Hot Strip Rolling Mill

含Si弹簧钢热连轧控制轧制工艺探讨

On controlled rolling of Si - spring steel

BP神经网络和弹跳方程在铝热连轧厚度预报中的综合应用

Application of BP Neural Network and Spring Equation to Thickness Prediction in Aluminum Hot Tandem Rolling

热连轧卷取机最大转矩递变张力PLC控制系统

Maximum Torque and Taper Tension Control System for Coiler of Hot Strip Mill by Means of PLC

钢板热连轧CAI教学软件设计

The Design of the CAI Software in Application to Hot Rolled Steel Producing

定宽压力机（SizingPress）是近年来热连轧生产线上新出现的一种设备。

Sizing Press ( SP ) is a kind of new equipment in hot mill line .

热连轧精轧机组负荷分配设定中的PSO算法应用研究

Research of PSO Application in the Scheduling Finishing of Hot Strip Mills

武钢2250热连轧机R1机架主传动电机的设计

Design of the Main Driving Motor for Frame R1 of 2250 Hot Continuous Rolling Mill at Wuhan Iron & Steel Company

热连轧含Nb低碳钢板卷奥氏体再结晶研究

Austenitic recrystallization during hot strip continuous rolling in low carbon Nb steel

热连轧综合AGC系统的智能化控制

Intelligent Control of a Multi-function AGC System in Hot Strip Mills

CSP热连轧层流冷却热过程模拟与控制

Thermal simulation and control of runout table cooling of CSP

带钢热连轧AGC系统实时仿真

Real-time simulator of AGC systems for hot-rolling mill

热连轧AGC软件分析与改进

Analysis and Improvement on the AGC Software Used in Continuous of Hot Strip Mill

基于Petri网的混合动态系统接口层设计方法及其在热连轧中的应用

A Design Approach of the Interface of Hybrid Dynamical Systems Based on Petri Nets and Its Application to Hot Continuous Milling

DEFORM和Marc平台下棒线材热连轧过程的数值模拟

Numerical Simulation of Wire and Rod Hot Continuous Rolling Process Using DEFORM and Marc

针对CVC热连轧精轧机组板形计算问题，采用影响函数法开发了计算热连轧机轧后板断面厚度分布的软件。

As to the flatness calculating of CVC mill , a software is developed to predict the strip thickness distribution after rolling by using the influence function method .

CSP板卷的氧化皮较传统热连轧的薄，其厚度对板厚也不太敏感。

The thickness of scale on CSP rolled coil is thinner and less sensitive to strip thickness .

2050热连轧精轧机组PFC磨损预报与实测的对比分析

Comparative analysis on predicted and measured wearings of PFC at finishing rolling train of 2050 hot rolling mill

同时还对径锻试样和热连轧试样低温冲击所需要的冲击功进行对比，并用SEM观察了冲击断口的表面。

In addition , the impact energy is compared between forged and hot rolled samples and the morphology of impact fracture surface was observed by SEM .

根据带钢热连轧机精轧机组主速度链及活套控制模型，用C语言软件实现了主干速度设定和活套控制功能。

According to the model of finisher master speed and looper in hotstrip mill , it is finished that master speed setup and looper height close loop control by computer control system and C language .

采用数值方法，对CSP带钢热连轧过程中的机架间冷却过程的传热进行了模拟计算。

The thermal evolution of hot rolled strip during inter-stand cooling at CSP hot rolling line was calculated with numerical method .

通过在热连轧厂生产管理系统中的应用，对DTS的实用性、灵活性、可靠性进行阐述。

Thirdly , it expatiates on the significance of the management . It expatiates the practicability , flexibility , reliability .

不同热连轧工艺Ti-IF钢板中析出相及织构的研究

Research on Precipitates and Texture in Ti-IF Steel Sheets Produced by Different Hot-rolling Process

基于TDC的1500mm热连轧带钢自动生产线

1500 mm Automatic Hot Strip Mill Line Based on TDC

按照现场的生产条件，通过ANSYS模拟，得到铁素体区热连轧带钢轧制过程中轧件横断面上的温度场及轧件表面、中部的温度随时间的变化曲线。

According to local production condition , it is achieved by ANSYS simulating that include temperature field of rolled piece cross section during rolling and surfaced and central temperature of rolled piece in any time .

归纳了现有典型的多个C-Mn钢奥氏体再结晶过程的物理冶金模型，并采用2组模拟热连轧变形参数，对各模型进行了评价。

The available recrystallization models of C-Mn steels during hot rolling were reviewed and assessed under two different rolling schedules .