电连接器

  • 网络electrical connector;electric coupler;IPC-STGF
电连接器电连接器
  1. 基于UG的电连接器绝缘体参数化设计

    Parametric Design of the Electrical Connector Insulator Based on UG

  2. 本文以Y11X系列圆形航天电连接器为研究对象,首先,通过对电连接器进行失效物理分析,建立了电连接器在温度和振动应力综合作用下的失效物理方程;

    The model Y11X Series of electrical connector be taken as the object ; under temperature and vibration stresses , through the failure mechanism analysis , Physics of Failure Equation has been attained ;

  3. 电连接器芯数范围从3芯到8芯,连接方式为螺纹式,针孔的连接方式为焊接式,压接式和PCB式。

    The QTY of contacts is3-pin to8-pin , the connection method for the thread type , pinhole connections for welding type , press-fit and PCB type .

  4. 按照航天电连接器的系统可靠性模型,利用极值分布理论推导出航天电连接器的寿命服从两参数的Weibull分布。

    According to the system reliability model , aerospace electrical connectors ' life follows Weibull distribution , which is derived from extreme value distribution theory .

  5. GB/T5053.2-1985汽车与挂车之间12N型电连接器

    Electrical connections between motor vehicles and towed vehicles & Type 12N

  6. 本文介绍一种用计算机控制LCR数字电桥自动测量滤波电连接器中电容的系统,介绍了硬件和软件的设计方法。

    This paper presented a new kind of automatic measurement system , which measured the capacitance of filtered electronic connectors through computer-controlled digital LCR bridge , introduced design methods of hardware and software .

  7. 为满足承受175~200℃高温电连接器的需要,作者研制出了一种Ni含量小于5%,并加入少量Al,Si,Cr,Mg等元素的高强度高导电铜合金(CE-4合金)。

    In order to meet the requirements of high-temperature ( 175 ~ 200 ℃) connectors , a high strength and electroconductive copper alloy ( CE-4 ) containing < 5 % Ni and minor amounts of Al , Si , Cr , Mg and other elements is prepared .

  8. 失效物理分析结果表明,在环境温度和振动应力的综合作用下,航天电连接器的失效物理方程为广义Eyring模型。

    The result of failure physics analysis shows that under the action of temperature and vibration stresses , failure physics equation of aerospace electrical connectors yields the generalized Eyring relationship .

  9. 在空间环境条件下,为了能对宇航电连接器进行寿命预测,并提高其运行的稳定性和可靠性,就必须研究宇航电连接器用典型材料PEI在空间环境条件下绝缘性能蜕化规律。

    In order to predict the life of aerospace electrical connectors and improve its stability and reliability , we have to study the deterioration of insulating properties of PEI which is used as typical materials for aerospace electrical connectors under the space environment condition .

  10. 高温电连接器用导电弹性合金的研究

    Study on an Elastic and Electro-conductive Alloy for High-Temperature Electric Connectors

  11. 系统工程电连接器防错新方法

    A New Method of Electrical Connector Against Mistake in System Engineering

  12. GB/T12793-1991电连接器接触件嵌卸工具总规范

    Generic specification for installing and removal tools for connectors electrical contact

  13. 航天电连接器在综合应力下可靠性增长的研究

    Research on Reliability Growth of Aerospace Electrical Connectors under Multiple Stresses

  14. 电连接器自动检测机的分析与改进设计

    Analysis and improvement of automatic detection machine of electric connector

  15. 电连接器真空环境试验电压加载方式研究

    Research on environment test voltage loading method of electrical connector in vacuum

  16. 电连接器接触件优化设计研究

    Technological Research on Optimization Design of Contacts of Electrical Connector

  17. 航天电连接器及其组件失效分析

    The Failure Analysis of Space Electric Connector and Its Assembly

  18. 镀层保护剂对电连接器高频性能的影响

    Influence of Plating Layer Protective Reagent to Electronic Capability of High-frequency Linker

  19. 航天电连接器可靠性试验和分析的研究。

    Research on electrical connector reliability test and analysis .

  20. 氟硅移印油墨在电连接器产品上的应用

    Application of Fluosilicic Pad Printing Ink for Electrical Connectors

  21. 探针式电连接器的接触可靠性试验与研究

    Experiment and Study for Pogo Type Connector Contact Reliability

  22. 电连接器综合应力加速寿命试验与统计分析

    Accelerated life test and statistical analysis of electrical connectors under multiple environmental stresses

  23. 电连接器真空负压玻璃封接工艺

    Vacuum negative pressure glass sealing process of electrical connector

  24. 电连接器接点两维形变的激光散斑干涉法测量

    Displacement for Electrical Contacts of Connector by Laser Speckle Interferometry Measurement of 2D

  25. 航天电连接器及其组件的自动检测

    The Automatic Inspection of Aerospace Connector and Its Component

  26. 航天用电连接器的接触可靠性研究

    Study on contact reliability of electric connector for Aerospace

  27. GB/T5053.3-1985汽车与挂车之间电连接器的试验方法与要求

    Test methods and requirements of electrical connections between motor vehicles and towed vehicles

  28. 摩擦磨损对电连接器接点插拔力特性的影响

    Effect of Wear on Electrical Connector 's Insertion-withdrawal Force

  29. 军用电子设备电连接器的防护

    Defending of Connector in the Military Electron Equipments

  30. 滤波电连接器中电容自动测量系统的设计与实现

    Design and implementation of automatic measurement system of the capacitance of filtered electronic connector