锡基合金

锡和锡基合金镀层的可焊性研究

Studies on Solderability of Tin and Tin Alloy Coatings

CPAⅢ光度法测定锡基合金中的铜

Spectrophotometric Determination of Copper in Tin Alloys With CPA ⅲ

石墨炉AAS法直接测定锡基合金中的微量铝

GF-AAS Determination of Aluminium in Tin-Based Alloys

铝及铝合金电镀高可焊性锡基合金工艺

High Solderability Tin alloy Electroplating Technology for Aluminum and Its Alloy

免清洗型软钎膏用锡基合金焊粉

Tin Based Alloy Solder Powder for Free Cleaning Type Soldering Paste

锂离子蓄电池用二元锡基合金负极的研究进展

Development of binary tin-based alloys as negative for Li-ion battery

用光滑的锡化物仔细装饰了的陶器。白镴：锡基合金，用来制作家庭器皿。

Pewter : Tin-based alloy used to make domestic utensils .

对碳纤维增强锡基合金强度的测定

The Measurement of Tensile Strength of Carbon Fiber-Tin Composites

差示吸光光度法测定铅锡基合金中锑

Determination of High Antimony Content in Lead Tin-Base Alloy by Differential Absorption Spectrophotometry

锡基合金薄膜负极材料的制备及性能研究

Preparation and Performance of Tin-Based Alloy Film Anode Materials

锂离子电池锡基合金体系负极研究

Tin-Based Alloy Anodes for Lithium Ion Batteries

锡基合金负极材料是最有竞争力的下一代锂离子电池负极材料之一。

Tin-based alloy material would be a promising negative material for next generation Li-ion batteries .

锡镴器皿被认为白镴制品的总称白镴：锡基合金，用来制作家庭器皿。

Pewter articles considered as a group . Pewter : Tin-based alloy used to make domestic utensils .

锡和锡基合金具有高的质量比容量和体积比容量，是下一代锂离子电池负极材料的研究热点之一。

Tin and tin-based alloys have been suggested as promising alternative anode materials for their high gravitational and volumetric capacity .

本文提出的方法已成功地应用于锡基合金及电镀废水中铜、铅、锌和镉的测定，准确度好。

The proposed method has been successfully applied to the determination of Cu , Pb , Zn and Cd in tin basis alloy and waste water of electroplating .

建立的光亮剂协同作用模型可为锡基合金镀液中光亮剂的选择提供理论指导，提出的配合离子竞争放电机制，丰富了合金共沉积理论。

The brightener corporate action model affords theory guidance on choosing brighteners used in bath for tin-based deposits , and the mechanism of competed discharge of complexing ions enriches theory of co-deposition of alloys .

采用AAS法测定了锡基轴承合金中的锑；探讨了仪器最佳工作条件、介质及共存离子干扰对测量的影响；

The paper discusses the optimum working condition of the instrument , interference of applicable medium and coexisting ions for the determination of Sb in Sn-based bearing alloy with Flame Atomic Absorption Spectrometry .

锡基轴承合金质量攻关中的工艺措施

Technical Measures in Tackling Key Quality Problems of Tin_Based Bearing Alloy

电弧喷涂锡基巴氏合金层组织及性能研究

Study on Microstructure and Properties of Arc Sprayed Tin-base Babbit Coating

无铅锡基钎料合金设计和合金相图及其计算

Design of lead-free solder alloy and alloy phase diagram calculation

碘量法测定锡基轴承合金中铜的改进

Improved Iodimetry for Determining Copper in Tin-based Bearing Alloy

短碳纤维增强锡基巴氏合金摩擦学特性

Tribological characteristics of short carbon ? Fiber ? Reinforced sn ? Matrix Babbitt alloy

锡基轴承合金中铅的分析方法

Analysis method for lead in tin-base bearing alloy

碳纳米管/锡基轴瓦合金复合减摩镀层的制备

Preparation of Carbon-nano-tubes / tin-based Compound Anti-friction Coating

锡基巴氏合金涂层火焰喷涂工艺

Influences of main process parameters on quality of Sn-based babbit alloy coating by flame spraying

锡基巴氏合金磨损表面的分形与磨损率

The Fractal Characteristics of the Worn Surface and the Wear Rate of Sn Matrix Babbitt Alloy

研究了锡基轴承合金中铅的分析方法，试验结果表明该方法准确度高，并且测定铅含量的范围大。

The analysis method for lead in tin-base bearing alloy is studied . It is showed from the test that it has high accuracy and wide measure range .

通过检查大型悬挂式异步电动机滑动轴瓦锡基轴承合金粘合情况，找出轴瓦存在的质量问题。

By checking the large hanging type asynchronous motor for the gluey condition of babbit of the sliding bearing , a quality problem of the bearing is found .

滑动与滚动组合轴承比较不同工厂滑动轴瓦的制造工艺，提出新的工艺，从而改善滑动轴瓦锡基轴承合金的粘合情况。

By comparing on the manufacturing technology of the sliding bearing in different works , a new manufacturing technology is given so as to improve on the gluey condition of babbit of the sliding bearing .

还介绍了Sn-B、iSn-Ag、Sn-Cu无氟无铅可焊性电镀锡基二元合金的特点、性能及典型的工艺配方。

Characteristics , performance and typical technological formulaes of fluorine-free and lead-free tin base binary alloy , such as Sn-Bi , Sn-Ag and Sn-Cu , solderable coatings electroplating were introduced as well .