铝管

挤包式铝管结构OPGW的特点

Characteristic of Extruded Aluminum Tube OPGW

该文介绍了铝管式OPGW的抗雷性能，并与不锈钢管式OPGW做了比较。

This paper presents the performance of lightning resistance of aluminum tube type OPGW , and the result of comparing with stainless steel tube OPGW .

PLC铝管灌装封尾机控制系统的改造

Transform of Controlling System of Al Tube Sealing Tail Machine of PLC

铜铝管对焊机的PLC控制

PLC Control of Butt Resistance Welder for Cu-Al Pipe

U形波纹铝管稳定性试验研究

Stability experiment research on U - shape ripple aluminium tube

焊接式铝管外导体物理发泡RF同轴电缆

Physically foamed RF coaxial cable with welded aluminium-tube outer conductor

铝管上色UV涂料的研制

Development of UV Coatings for Colouring Copper-Aluminium Tubes

Conform机在生产多孔扁铝管产品上的应用

Application of Conform Extruder to Multi - Hole Flat Aluminium Tube Product

实践证明，PLC控制型铜铝管对焊机的执行机构完全满足铜铝管优质焊接的要求。

In practice , the executive mechanism of PLC controlled Cu-Al pipe butt welder meets the expectation for high quality Cu-Al welding completely .

由于PLC控制型铜铝管对焊机的控制精度和执行机构动作精度均很高，从而其整体性能达到了较高水平。

Because of its high control and executive precision , the whole technological performance of PLC controlled Cu-Al pipe butt welder reaches the top position .

借助于本系统，我们从实验上分析了铝管中传播的Lamb波模式。

With the aid of this system , the Lamb wave modes propagating along an aluminum alloy tube are analyzed experimentally .

为提高铜铝管控制精度和焊接范围，在原有基础上采用了PLC与文本显示器相结合的方法进行控制，使焊接时间的控制精度由0。

In order to enhance the control precision of the welding period and extend the application range for the Cu-Al pipe welding machine , the PLC and TP04G text display control was adopted .

针对平行流多孔铝管连续挤压成形过程，基于Deform-3D软件平台，通过对挤压模型采取适当的简化措施，实现了挤压过程的三维有限元数值模拟；

This paper is concerned with the calculation of continuous extrusion process of the flat multi-hole Aluminum tubes . In order to obtain the numerical simulation results by Deform software using three dimensional finite element method , similarity is applied to the simulation .

测定了Na-β氧化铝管在NaOH、NaOH-KOH、NaOH-（CH3）4NOH以及NaOH-NaCl四种溶液的浓差电池体系中的电动势，求得Na-β氧化铝与NaOH水溶液之间的界面电势Δφ。

EMF of the concentration cells of sodium beta alumina tubes in four aqueous solutions : NaOH , NaOH-KOH , NaOH - ( CH_3 ) _4NOH and NaOH-NaCl were measured . The potential differences across the Na-beta alumina / NaOH aqueous solution interfaces Δφ, were obtained .

本文以XRL型铝衬套复合胶辊为例，运用静态和动态应力、应变理论，分析了运转过程中胶管、铝管承受加压后所产生之压缩应力及拉伸应力情况；

Taking the XRL aluminium bushing complex rubber roller as one example , the paper touches on the compressive stress and stretch stress of rubber and aluminium tubes running in pressure by application of static and dynamic stress and the strain theory .

冰箱用铜铝管接头的储能焊

Condenser Discharge Welding for Cu & Al Pipe Joint in Refrigerator

内嵌铝管在冷弯过程中发生开裂。

The wire-embedded aluminium pipes have cracked during the cold bending .

铝管强旋的软化现象探讨

Exploration for the softening phenomenon of strong spinning of aluminium pipes

张力控制器在铝管生产线中的应用

Application of the Strain Controller in the Aluminum Pipe Production Line

铝管鞋油气胀腐蚀与缓蚀问题的研究

Studies on corrosion of shoe polish aluminium tubes and its inhibition

泡沫铝填充薄壁方形铝管的静态弯曲崩毁行为

Bending collapse behavior of square aluminum extrusions with aluminum foam filler

采用模糊综合评价法设计铜铝管对焊机

Design of Cu-Al Pipes Welding Equipment by Fuzzy Synthesized Evaluation Method

冰箱制冷系统铜铝管的连接方法

Joining method of Al-Cu tube for refrigerating system of refrigerator

鞍座支撑薄壁铝管破坏机理的实验研究

Experiments on Failure Mechanism of Saddle Supported Thin-walled Aluminium Tube

铝管冷凝器强度胀接探讨

An Approach to Strength Expanding for Aluminium Tubes in Condenser

表面活性剂与硅烷对铝管表面的协同改性研究

Synergistic Surface Modification of Aluminum Tube by Silane and Surface Active Agent

研制出的铜铝管焊接设备，整体性能优良。

The welding units of copper-aluminum pipe manufactured have superior integral performance .

高耐力铝管只是这个故事的一部分。

The high tolerance aluminum tubes are only part of the story .

内螺纹铝管机械胀管工艺研究

Study on Mechanical Expanding Processing of Aluminium Internal Ribs Tube

渗铝管在低变气管线上的应用

The application of aluminized pipe on low temperature converted gas pipe line