连杆螺栓
- 网络connecting-rod bolt;CONNECTING ROD BOLT;Connecting rod Screw
-
连杆螺栓断裂原因探讨及对策
A Study on Fracture Reasons of the Connecting-rod Bolt and Its Countermeasures
-
某船用柴油机连杆螺栓断裂研究
The Research on Connecting Rod Bolt Fracture of a Marine Diesel Engine
-
康明斯B系列发动机连杆螺栓及装配工艺研究
Study on connecting rod bolt of CUMMINS B series engine and its assembling process
-
柴油机连杆螺栓松动故障的诊断
Fault Diagnosis of Diesel Engine As Connecting Rod Bolts Coming Loose
-
连杆螺栓孔螺纹挤压工艺
The Squeeze Technology of Making Threaded Hole for Connecting Rod Bolt
-
连杆螺栓的应力分析与疲劳寿命研究
Stress Analysis and Fatigue Life Research for Connecting Rod Bolt
-
高强度连杆螺栓的疲劳寿命分析
Fatigue Life Analysis of the High Strength Connecting Rod Bolt
-
柴油机连杆螺栓预紧力的数值分析
Numerical Analysis of Pretightening Force of Diesel Connecting Rod Bolts
-
汽车发动机连杆螺栓硬度自动检测装置
The Automatic Testing Device of Hardness of Tie Rod Stud for Auto-Engine
-
应用巴克豪森磁噪声技术对连杆螺栓硬度的测定
Hardness measurement of conrod bolt using Magnetic Barkhausen noise
-
裂解连杆螺栓自动装配系统研究与设计
Research and Design on Automatic Assembling Bolts System for Fracture Splitting Connecting Rods
-
发动机12.9级连杆螺栓的材料与工艺
Material and Process of the 12.9-Grade Con Rod Bolts
-
在连杆螺栓上安装连杆螺栓保护件。
Install connecting rod bolt protectors on rod bolts .
-
发动机连杆螺栓损坏原因及改进措施
Discussions of Connecting Rod Bolt Failure and Improving Measures
-
连杆螺栓(钉)锁紧种类及正确装配
Locking Types and Correct Assembly of Connecting Rod Bolt
-
连杆螺栓设计方法的改进
Improvement on Design Method for Connecting Rod Bolt
-
汽车发动机连杆螺栓拧紧力矩和装配工艺分析
Analysis on the Tightening Moment and Assembling Technique of Connecting-rob Bolts of Automobile Engine
-
6102柴油机连杆螺栓孔的加工
Machining of Threaded Holes in Engine Con Rods
-
拧紧已更换的连杆螺栓。
Tighten Con-rod bolts that have been replaced .
-
105系列柴油机连杆螺栓扭紧力矩的选定
Determinating the tightening torque for connecting rod bearing bolts of diesel engine series 105
-
柴油机连杆螺栓受载动态特性的计算分析
The Calculation and Analysis of Dynamic Characteristic of the Diesel Connecting Rod Screw Bolt
-
桑塔纳连杆螺栓尺寸在线检测仪
The Measuring Instrument of Santana Link Bolt Size
-
用伸长测量法确定活塞空压机连杆螺栓预紧力
Fix the Pretension Force of Bolt on Linkage in Piston Compressor with Elongation Measurement Method
-
每次都必须更换连杆螺栓。
Con-rod bolts must always be replaced .
-
提出了预防连杆螺栓和活塞失效的措施及改进建议。
Prevention measures for fatigue fracture of the bolt and damage of the piston were proposed .
-
分析了发动机连杆螺栓损坏的原因,提出了改进措施。
In this paper the causes of the connecting rod bolt failure in motor vehicle engines are discussed , and the improving measures are suggested as wall .
-
为实现12.9级螺栓的国产化,以发动机连杆螺栓为对象,研究了12.9连杆螺栓的材料和工艺。
In order to localize the 12.9-grade bolts , with the engine con rod bolts as the objective , the material and process of the 12.9-grade con rod bolts are studied .
-
发动机关键工位螺栓包括连杆螺栓、曲轴螺栓、主轴承盖螺栓、气缸盖螺栓、飞轮螺栓和减振器螺栓等均属螺纹联接。
The key position bolt of the engine include Connecting rod , Crankshaft , Main bearing , Cylinder head , Flywheel and shock absorber bolt , all of which belong to bolt fastening .
-
对12.9级连杆螺栓采取氮气保护热处理、杆部缩细冷镦、热处理后滚丝是可行的工艺方法,可生产出高质量、高精度螺栓,而且满足批量生产要求。
Nitrogen heat treatment , thinning and cold heading of body of bolt and thread rolling after heat treatment are all effective processes to produce high quality , high accuracy 12.9-grade bolts and they meet requirements of mass production .
-
介绍了柴油机连杆螺栓的锁紧种类、特点和技术要求,特别是对高强度自锁螺栓的正确装配提出了详细的检查和操作方法。对于柴油机的维修具有一定的指导意义。
This paper introduces locking types , features and technical requirements of connecting rod bolts , puts forward particularly detailed methods for inspection and operation of correct assembly of high-strength self-locking bolt , which has certain guiding meaning to maintenance of diesel engine .