模具寿命

模具寿命与摩擦学设计

Mould life and tribology design

怎样建立一套行之有效的模具保养与维护体系，确保生产完成率的同时更好地延长模具寿命，使模具产出最大化。

How to build up a good injecting mould maintenance system to maintain and repair the mould and prolong the mould life , also maximize the mould capacity .

TiN镀层对热作模具寿命的改进

To Improve Hot Die 's Longevity by TiN Coating

离子氮化-PECVDTiN膜复合处理提高切边模具寿命研究

Prolonging the Service Life of Edge-Cutting Die by Duplex Treatment of Plasma Nitriding-PECVD TiN Film

本文介绍了一种通过CVD金钢石涂层大幅度提高模具寿命的新方法。

In the paper a new method to prolong the working life of the die-CVD diamond coating is introduced .

对采用PVD、CVD和PCVD表面涂覆处理的六角切边模和内六角冲头的生产使用情况和使用寿命进行了比较，其中PCVD涂层模具寿命比未涂层模具提高一倍以上。

The service lives of shear dies and punches treated by PVD , CVD and PCVD are compared .

冲裁件的工艺性良好与否对冲裁件的质量、制造成本以及模具寿命有很大影响。本文利用VBA编程语言，实现了冲裁件的预处理和逻辑约束分析以及结构工艺性分析；

VBA programme language has been adopted to realize the pretreatment and the logic constraint analysis and the structural technologic analysis of the blanking part .

CO-W-P刷镀层的晶化动力学与热模具寿命

Crystallization Kinetics of Co-W-P Brush - Plated Coatings and the Life of Hot-working Dies

研究了低温化学热处理、高能束流表面处理等对H13钢表面性能及其模具寿命的影响。

The effects of low temperature chemical heat treatment and high energy density surface treatment on H13 steel surface properties and its die lifespan .

研究了H13钢的锻造、预备热处理、淬火回火、表面热处理对其性能和模具寿命的影响。

The effects on the properties and die lifespan of forging , conditioning heat treatment , quenching ami tempering , surface heat treatment are researched .

提高Cr12MoV钢冷作模具寿命的措施

Measures for Prolonging the Service Life of the Cold Working Die of Cr 12 MoV Steel

阐述了线切割加工（WEDM）对模具寿命和表面质量的影响，并在此基础上提出了相应的改进措施，以利于提高模具使用寿命，避免模具的早期失效。

The influence of WEDM on die mold life and surface quality is stated , based on the analysis , the improvement measure is proposed , improved die mold life and avoid the early failure of die mold .

DISA造型线具有生产效率高、铸件质量好等优点，在小型铸件大批量生产上具有不可替代的优势，但是其铸造工艺和模具寿命一直是影响生产厂家的突出问题。

The DISA casting line has many merits such as high production efficiency , good casting quality etc. It is irreplaceable for applying to mass production on small casting . The casting process and mold service life are conspicuous problems which always perplex the manufacture factories .

用组合式压型模提高模具寿命

To Improve the Die Life by Using a Combined Marking Die

提高耐火砖模具寿命的途径

Ways of increasing service life of dies for refractory brick forming

大间隙冲裁对模具寿命的影响

The Affect of Big - Clearance Blanking to the Die Life

阐述了提高模具寿命的主要途径。

The main ways to improve die longevity are described .

提高铝型材模具寿命的途径

Way of improving the die service life of aluminum profile

应用刷镀技术提高模具寿命刷镀技术在磨损研究中的应用

Increase of Service Life for Dies by Brush Plating Technique

线切割加工对模具寿命及表面质量的影响

The Influence of WEDM on Die & Mold Life and Surface Quality

影响模具寿命的因素与措施

The Factors and the Precaution to Affect the Mold Life

热收口成形对模具寿命影响的研究

Research on the die life under the influence of hot shell nosing

介绍了国外模具寿命、容积大小与金刚石生产成本的关系现状。

The relationship between production cost and pot life for aluminum smelter ;

提高模具寿命，降低模具费用

Prolonging the Life of Extrusion Die and Reducing the Cost of It

模具寿命是冷摆辗的关键问题之一。

Die life was one of the problems in cold rotary forging .

提高行星齿轮冷摆辗模具寿命

Increasing service life of cold rotary forging dies of the bevel gears

气门顶杆热挤压模具寿命研究

Longevity study of hot extrusion die of valve stem

从失效分析看模具寿命及影响因素

Die Life and Consideration On Side of Failure Analysis

提高模具寿命的表面复合处理技术

Duplex Surface Treatment Technique for Prolonging Mould Servicing Life

研制出了降低磨损，提高模具寿命的润滑剂配方。

A lubricant formulation to reduce wear and prolong die life is developed .