终止剂

采用加料方式2添加0.06%的PVC树脂改进剂或添加0.04%液体锌热稳定剂（或0.04%液体锌与新型耐热终止剂SPJ-KHZ复合使用）能有效提高PVC树脂的热稳定性能。

The heat stability of PVC resin could be efficiently improved by adding 0.06 wt % improver for PVC resin or adding 0.04 wt % liquid zinc heat stabilizer ( or 0.04 wt % compound system of liquid zinc and new heat-resistant terminator SPJ-KHZ ) by charging method 2 .

多功能终止剂在聚氯乙烯生产中的作用

Effects of polyfunctional terminator in PVC production

ELISA新底物TMB终止剂的研究

Study on new stopping agent s of substrate TMB in ELISA

以L-抗坏血酸（Vc）为终止剂改进的经典胆红素氧化酶（BOD）酶活测定方法。

The normal method for the measurement of bilirubin oxidase was improved by using ascorbic acid as the terminating agent .

总结出光引发剂C60-（SR）n（C60负载引发-转移-终止剂）与常规光引发剂AIBN引发AN光聚合的区别。

The differences of photopolymerization systems are summarized , in which C60 - ( SR ) n ( iniferter supported with C60 ) and AIBN are respectively used as photoinitiator .

卤素自由基是由羟基自由基与卤化物如HX反应而产生的，它可被用作连锁反应的终止剂。

Halogen radicals produced by the reaction of hydroxyl radicals with halides , such as HX , may serve as terminators for the chain reaction .

本论文描述了两种弹性蛋白表面改性的方法：原子转移自由基聚合（ATRP）和硫代-引发转移终止剂（thio-iniferters），并对其性能进行了研究。

In this thesis , synthesis and properties of elastin graft copolymer via atom transfer radical polymerization ( ATRP ) and thio-iniferters were described .

结果表明，聚合不加终止剂即可自动终止。

The result showed that the polymerization could be terminated automatically without terminator .

催化裂化提升管反应器终止剂注入位置的确定

Determination of location of termina-tor in FCC riser reactor

终止剂法测定胆红素氧化酶活性

Improved Method to Measure Bilirubin Oxidase by Using Ascorbic Acid as Terminating Agent

用引发转移终止剂制备嵌段和接枝共聚物

Preparation of Block and Graft Copolymer with Iniferters

在聚合体系内加入热稳定剂，并采用耐热终止剂。

And ( 4 ) adding heat stabilizer , into the polymerization system and adopting heat-resistant terminator .

从反应机理上探讨了中和剂与终止剂的作用本质；

The functional essence of neutralizing agent and terminating agent was discussed from the view of polymerization mechanism .

介绍了催化裂化装置终止剂的类型、用量和注入位置等因素在催化裂化反应过程中的作用。

The action of the type , amount and injecting location of quench medium on the reaction process was introduced .

当聚合釜压力降为0.15～0.20MPa时加终止剂（此时转化率在85%以下）终止反应。

And ( 3 ) adding terminator when pressure reduces to 0.15 ~ 0.20 MPa ( with conversion ≤ 85 % ) to terminate polymerization reaction .

优化提升管操作，增加预提升干气量和雾化蒸汽量，用酸性水代替石脑油作终止剂；

Optimizing riser operation , increasing the amount of pre-rise dry gas and atomized stream , using acid water as the stopping agent instead of naphtha .

采用终止剂和过滤法脱除催化剂代替传统的碱洗、水洗法，避免了产生大量含氟废水所造成的环境污染问题。

The polymerization catalysts were removed by terminating agent and filtration instead of the conventional water washing method to avoid pollution of the environment caused by waste water containing fluorine .

终止剂为水或粗汽油，其注入量分别为原料的3%～6%及5%～10%。

Water or cracked naphtha could be used as the terminating agent , which injection amount was 3 % - 6 % and 5 % - 10 % respectively on feed basis .