电磁搅拌

  • 网络electromagnetic stirring;ems;M-EMS
电磁搅拌电磁搅拌
  1. 论述了电磁搅拌技术的发展、作用及其在武钢的应用。

    The present paper expounds the progress of EMS technology , its function and application in WISCO .

  2. 随着技术的进步和发展,电磁搅拌技术不断更新和发展,必将迎来一个辉煌的应用前景。

    The EMS technology will continually advance and usher in a very splendid time of application with development of new technologies .

  3. P变质可以强化电磁搅拌效果。

    The stirring effect can be strengthened by the modification of phosphorus .

  4. 电磁搅拌对纯Al凝固结晶的影响

    The Effect of Electromagnetic Agitation on Pure Al Solidifying Crystals

  5. 电磁搅拌下的氟离子在Al2O3上的吸附

    The Electromagnetic Agitation Effect on the Adsorption of Fluorine-ion with Al2O3

  6. CO2+电磁搅拌复合堆焊梯度功能层的微观组织及性能研究

    Study on mechanical properties and microstructure of gradient functional layer prepared by co_2 surfacing welding with electromagnetic stir

  7. 电磁搅拌法合成(Al2O3+Al3Zr)p/A356复合材料的凝固组织

    Solidification Microstructure of ( Al_2O_3 + Al_3Zr ) p / A356 Composites Synthesized by Electromagnetic Stirring

  8. 电磁搅拌作用下TM颗粒-Al红外功能复合材料的研究

    Study on TM Al infrared function composite by electromagnetic stirring

  9. SiCP/Al水平连铸电磁搅拌结晶器的设计

    The design of electromagnetic stirring chilling device used in SiC_P / Al horizontal continuous casting process

  10. 电磁搅拌Al-Si合金宏观组织细化机理

    The Refinement Mechanism of Macrostructure of Al-Si Alloy by Electromagnetic Stirring

  11. 过共晶Al-Si合金的电磁搅拌工艺研究

    The process of electromagnetic stirring of hyper-eutectic Al-Si alloys

  12. 3C船板钢连铸电磁搅拌参数的选择

    Parameters of electromagnetic stirring for continuous casting of 3C ship plate steel

  13. 磨损表面的SEM分析显示粘着磨损比不施加电磁搅拌时明显减少,摩擦磨损机制以磨粒磨损为主。

    The SEM analysis of the worn-out surface indicated that the adhesive wear was reduced and the wear mechanism was mainly abrasion after employing electromagnetic stirring .

  14. 电磁搅拌对Fe-C共晶合金石墨片间距与过冷度的影响

    Influence of induction stirring on Fe-C eutectic lamellar spacing and supercooling

  15. 对电磁搅拌条件下凝固的亚共晶、共晶合金组织进行研究后发现,电磁搅拌可使Al-Si亚共晶、共晶宏观组织中等轴晶明显细化;

    In this paper , the method of electromagnetism stir is applied to study the solidified hypoeutectic and eutectic alloys .

  16. 以CuO、Cr2O3、Al粉为原料采用铝热-电磁搅拌工艺制备出CuCr合金。

    The CuCr alloy was prepared by the SHS electromagnetic casting using CuO and Cr_2O_3 as materials and Al powder as reducing agent .

  17. SEM分析显示:施加电磁搅拌后凝固组织致密,颗粒增强相的数量增加,颗粒细化、分布趋于均匀。

    SEM analysis indicates that after being stirred by electromagnetic the microstructure got compact , the amount of reinforced phase is increased , and the grain is fined and distributed uniformly .

  18. 通过LF精炼及连铸保护浇铸和电磁搅拌,铸坯中氧含量达18×10-6。

    The oxygen content in cast billet was 18 × 10-6 by LF refining with Ar stirring , sealed and argon shielding casting and electromagnetic stirring .

  19. 分析了电磁搅拌对CuCr合金微观结构的影响机理。

    The effect mechanism of the electromagnetic stirring on the microstructure of CuCr alloy was analyzed .

  20. 用电磁搅拌提高20g钢·埋弧自动焊焊缝质量

    Improving Weld Quality for Automatic Submerged arc Welding of 20g Steel by way of Electromagnetic stirring in the puddle

  21. SKF炉电磁搅拌系统的切换改造

    Switching Transformation of Electromagnetic Stirring System of SKF Furnace

  22. 保温电磁搅拌对ZA-27合金凝固组织的影响

    The Influence of Isothermal Electromagnetic Stirring on Solidifying Structure of ZA-27 Alloy

  23. 研究电磁搅拌对亚共晶、共晶及过共晶AlSi合金显微组织的影响,并对其在EMS作用下的液淬组织和凝固组织进行研究。

    The effect of electromagnetic stirring on the microstructure of Al-Si alloys to hypoeutectic and eutectic and hypereutectic has been studied . The quenched structures and solidification structure by Electromagnetic Stirring techniques was explained .

  24. 电磁搅拌(电压100V)加0.1%~0.3%Sr可改善合金的腐蚀性能,其作用远不及稀土元素Ce。

    Electromagnetic stirring and 0.1 % ~ 0.3 % Sr could improve corrosion property too , but the effect is inferior to Ce .

  25. 末端电磁搅拌(FinalElectromagneticStirring,FEMS)技术是改善铸坯质量的一种比较有效的方法,通过这样的设备可以很好地解决钢铁连铸中的高碳钢中心缺陷问题。

    Final electromagnetic stirring ( FEMS ) is a effective method for improving the steel quality and these defects are improved through it in the continuous casting of high carbon steel .

  26. 实验结果表明,电磁搅拌使MIG焊缝由指状熔深变为椭圆形熔深,改善焊缝成形。

    The results show that electromagnetic stirring modifies the shape of aluminum alloy MIG weld , the finger-like shape penetration of weld changing to elliptical penetration .

  27. 在试验范围内,随电磁搅拌电源频率的增大,半固态AZ91D合金组织中固相颗粒形态越来越圆整。

    In the present study , higher power frequency makes the solid particle of the semi-solid AZ91D more spherical .

  28. 对于无电磁搅拌的过程,建立了高熔点组元Fe在Al熔体中半无限大型溶解理论模型,得到了高熔点组元Fe在扩散层内的不同时间,不同位置的成分分布曲线。

    Under the condition without stirring , the half-infinity diffusion theoretical model of high melting component Fe dissolving in Al melt was developed . The solute distribution curves of high melting component Fe with different time and positions were obtained .

  29. 研究电磁搅拌对2219铝铜合金脉冲MIG焊焊缝形状、组织及性能的影响。

    Effects of electromagnetic stirring on the shape , structure and mechanical properties of pulse metal inert gas ( MIG ) weld of 2219 Al-Cu alloy were investigated .

  30. 扫描电镜(SEM)分析显示:施加电磁搅拌后复合材料的凝固组织致密,颗粒增强相的体积分数增加,且颗粒细化、分布更趋于均匀。

    SEM analysis indicated that after being stirred by the low frequency electromagnetic field the microstructure of the composite got compact , the amount of reinforced phase was increased , and the reinforced particles grew finer and distributed more uniformly .