深过冷

  • 网络deep supercooling;undercooling
深过冷深过冷
  1. 用金相分析法对含10%~30%CoCu合金液态深过冷条件下的液相分解行为进行了研究。

    The liquid separation behaviors of 10 % ~ 30 % Co Cu alloys were investigated by means of melt glass deep supercooling technology .

  2. 深过冷条件下Cu-Co合金的二次液相分解与合金的凝固

    Secondary liquid separation and solidification of Cu-Co alloys under deep supercooling

  3. Al-Cu-Fe二十面体准晶的深过冷研究

    A study of deep undercooling for Al-Cu-Fe icosahedral quasicrystal

  4. 深过冷Ni基合金在电磁场中的凝固

    The Solidification of Undercooled Ni-Base Alloy in the Electromagnetic Field

  5. 深过冷液态Ni2TiAl合金热物理性质的分子动力学模拟

    A molecular dynamics simulation of thermodynamic properties of undercooled liquid Ni_2TiAl alloy

  6. 大块深过冷Al-Mn-(Si,B)合金准晶相的初生凝固

    Primary solidification of quasicrystalline phase in a bulk undercooled al-mn - ( si , b ) alloy

  7. CuNiFe合金在特殊涂层中的深过冷及其遗传性

    High undercooling and heredity of Cu - Ni - Fe alloys in special coating materials

  8. 深过冷Cu(50)Ni(50)熔体凝固的定向枝晶组织

    Directional dendritic microstructures solidified from undercooled Cu_ ( 50 ) Ni_ ( 50 ) melts

  9. 深过冷Ni(80.3)B(19.7)合金的再辉和非规则共晶的形成

    Recalescence behavior and formation of anomalous eutectic in the deeply undercooled Ni_ ( 80.3 ) B_ ( 19.7 ) alloys

  10. 在深过冷Al(72)Ni(12)Co(16)合金的凝固过程中,冷却速率对两相竞争形核影响甚微。

    The effect of the cooling rates on the nucleation of competing phases is negligible in the undercooled alloy melts .

  11. 深过冷Ni-P共晶合金凝固组织的形成和转变

    Formation and transition of solidification structure in high undercooled Ni-P eutectic alloy

  12. 设计了一种用于SnSb等滑动轴承合金的无容器接触深过冷快速凝固装置。

    A new containerless rapid solidification device used to prepare Sn-Sb journal bearing alloys was developed .

  13. 深过冷Ni-P共晶合金凝固动力学分析

    Solidification kinetics of high undercooled Ni-P eutectic alloys

  14. 结果表明:在深过冷液体区间和Tg以下均能产生塑性变形,且变形量均受加热温度、应力大小和作用时间的影响。

    It is proposed that plastic deformation behavior exists both in the supercooled liquid region and below T_g . The deformation degree depends on holding temperature , loading stress and loading time .

  15. Cu原子簇触发形核下的深过冷Ag-Ge合金组织演变研究

    Microstructural Evolution of the Deeply Undercooled Ag-Ge Alloys with Cu Atoms Cluster Triggered Nucleation

  16. 根据经典的形核和生长理论,通过实验分析了深过冷NiP共晶合金的凝固行为。

    The solidification of high undercooled Ni P eutectic alloy was analyzed by classical nucleation and growth theory .

  17. 热分析在Fe-B合金深过冷凝固过程中的应用

    Application of Thermal Analysis in Solidification Process of Undercooled Fe-B Alloy

  18. 研究了MgCuY7Nd大块非晶合金在玻璃转化温度Tg附近及深过冷液相区的等温压缩变形行为。

    The isothermal compression behaviors of MgCu-Y7Nd bulk amorphous alloy nearby the glass transition temperature ( Tg ) and at temperature in the supercooled liquid region are observed .

  19. 采用熔融玻璃深过冷技术和金相分析法,对Cu(10%~30%)Co合金液态深过冷条件下的二次液相分解和合金的凝固行为进行了分析。

    The secondary liquid separation and solidification behaviors of Cu ( 10 % ~ 30 % ) Co alloys under deep supercooling were investigated by means of fluxing glass deep supercooling technology and metallographic analysis .

  20. 深过冷条件下Cu-Co合金的液相分解

    Liquid separating behavior of Cu-Co alloys under deep supercooling

  21. 深过冷Fe-B-Si共晶块体纳米材料的凝固组织特征

    The microstructure characteristics of high undercooled bulk nanocrystalline Fe-B-Si eutectic alloy

  22. 实验发现,深过冷NiP共晶合金的凝固组织由粒状的共晶团和棒状的规则共晶所组成。

    The experimental results indicated that solidification microstructure of undercooled Ni P eutectic alloy was both particle like eutectic groups and regular eutectic structure .

  23. 通过对MgCuY块体金属玻璃在深过冷液体区间塑性变形特性的研究,探讨了影响其塑性变形的因素及其影响规律。

    Influence factors of the plastic deformation of Mg Cu Y bulk metallic glass and the variation principles were studied according to the analysis of the plastic deformation of Mg Cu Y bulk metallic glass in supercooled liquid region .

  24. 深过冷Ni-Sn合金非规则共晶的形成机制

    The formation mechanism of anomalous eutectic in highly undercooled Ni-Sn eutectic alloy

  25. 深过冷Ni-Si共晶合金晶粒细化机制

    Grain Refinement Mechanism in Highly Undercooled Eutectic Ni-Si Alloy

  26. 在电弧炉中熔炼并凝固,石墨基本呈球状组织形态,在3m落管中经深过冷快速凝固后石墨呈球状组织。

    Graphite smelting and solidifying in arc furnace is in globular shape , and homogeneous globular graphite is achieved in rapidly-solidified alloy prepared by 3m drop tube .

  27. Fe-Sn偏晶合金的深过冷快速凝固组织

    Rapid solidification microstructures of Fe-Sn monotectic alloys at deep undercooling

  28. Ni-Ni3Sn系近共晶合金深过冷形核规律

    The nucleation of highly undercooled Ni-Ni_3Sn alloy closed to eutectic composition

  29. 深过冷Ni-Pb-Cu固体自润滑材料摩擦行为研究

    Research on the Tribological Property of Undercooled Ni-Pb-Cu Solid Self-lubricating Alloy

  30. 研究了三元Pb-12%Sb-4%Sn共晶合金在深过冷条件下的快速凝固,实验中获得65K(0.13TE)的最大过冷度。

    Rapid solidification of undercooled Pb-12 % Sb-4 % Sn ternary eutectic alloy has been investigated . The maximum undercooling of the samples is up to 65K ( 0.13T_E ) .