有机聚合物

有机聚合物薄膜激光诱导相位孔衍射的实验和理论

Experiment and theory on diffraction from laser-induced PHASE-HOLE in polymer film

有机聚合物热光器件热场的解析模型

Analytical Model of Thermal Field in Polymer Thermo - Optic Devices

本工作是研究掺C（60）有机聚合物热光特性对不定位干涉的作用。

Nonlocalized interference influenced by thermo-optic effect of C60 dopedpolymer film is invested in this paper .

CCD摄象法测量有机聚合物光波导传输损耗

CCD Camera Photographing in Detecting the Propagation Attenuate Coefficient of Polymer Waveguides

有机聚合物集成光学RF移相器关键技术研究

The Research on the Key Technology of Integrated Polymer RF Phase Shifter

SOL-GEL法制有机聚合物/无机纳米粒子复合材料

Preparation of composite materials of organic polymers and inorganic nano-particles by sol-gel process

有机聚合物CPU的结构形态

Surface Morphology of Organic CPU Crystals

激基复合物与有机聚合物EL性能的关系

The Relation of Exciplex Formation and Organic & Polymer EL

稀土有机聚合物EL进展及其若干问题

Development and Some Problems of Rare Earth Organic Polymer Electroluminescence

Fu等人研究了金属/有机聚合物结构中电荷的注入与输运。

Fu et al . studied the injection and transport of charge in a metal / polymer structure .

掺加由有机聚合物和含Fe、Al、PO4的无机盐组成的复合外加剂；

Adding a kind of composite additive consisting of organic polymers and inorganic salts with Fe , Al , PO4 ;

阳离子有机聚合物粘土稳定剂PTA的研究与应用

Cationic polymer clay-stabilizer pta : research and Application

传统的载体主要是有机聚合物、纤维、凝胶材料或者纳米Au、Pt等贵重金属。

Conventional carriers used were polymer , fibre , gel or Au , Ag and so on noble metal nanoparticles .

采用紫外辐照法成功合成了CdS－聚丙烯酰胺（CdS－PAM）、Ag－聚丙烯酸胺（Ag－PAM）等无机－有机聚合物纳米复合材料。

Inorganic ( CdS , Ag ) - polyacrylamide ( PAM ) nanocomposites were prepared successfully using a convenient ultraviolet irradiation technique .

以镍铝合金粉末和适当有机聚合物粘结剂为原料，制备出可用于固定床加氢的颗粒状RaneyNi催化剂。

Granule Raney nickel catalyst for fixed-bed hydrogenation reaction was prepared by extruding the Ni-Al alloy powder and organic polymers .

聚苯胺（PAn）类和聚对苯撑乙烯（PPV）类材料都为线性共轭高分子有机聚合物。

Polyaniline ( PAn ) and Poly-phenylene vinylene ( PPV ) are organic polymers with π ^ - conjugated structure .

本文着重研究有机聚合物线性烧蚀速率（AR）、烧蚀隔热性能指数（API）和有机聚合物结构常数（K）与烧蚀隔热性的关系。

The relation of linear ablative rate ( AR ), ablative heat insulating property index ( API ) and structure constant ( K ) to ablative heat insulating property were studied in this paper .

PPQ共轭有机聚合物平面光波导的非线性传输特性的实验研究

Experimental Study of Nonlinear Effects in a PPQ Organic Planar Waveguide

另一种是以纳米TiO2为核、有机聚合物为壳的纳米TiO2/聚合物复合结构乳胶粒子。

While the other kind of particles were nano TiO 2 / polymer composite emulsion particles of core shell structure , with nano TiO 2 as core and organic polymer as shell .

采用热压和键合的方法制作玻璃和有机聚合物（PMMA）芯片，对玻璃和PMMA芯片在高压直流电场作用下的伏安特性进行了研究和分析。

The fabrications of glass microfluidic chips by using photolithograph , wet etching and thermal bonding methods and PMMA microfluidic chip by hot embossing and direct bonding methods were studied .

利用有机聚合物分别制作了基于线性电光效应和二次电光效应的反射型电光调制器，并提出了反射型电光调制器的串联并行WDM调制方法。

Using these EO materials , we fabricated attenuated total reflection ( ATR ) modulators based on linear and quadratic EO effects and proposed a WDM modulation scheme by cascading the ATR modulators .

它与C-C键单元为主链的聚合物在结构和性能上明显不同，是典型的半无机半有机聚合物，既具有无机物的耐热性，又具有有机高分子的柔顺性。

Because silicone rubber is a typical semi-inorganic and semi-organic polymer , it possesses both heat resistance of inorganic matter and flexibility of organic polymer .

无机-有机聚合物降滤失剂PTF的研制及应用

An Inorganic-Organic Polymer Fluid Loss Additive PTF

结果显示复合材料在微观下呈核壳结构，PTh（壳层）包覆在CFx（内核）片层表面形成了均匀有机聚合物层。

CFx / PTh composite shows core-shell microstructure , and PTh ( shell ) encapsulated on surface of CFx ( kernel ) forms a uniform organic polymer layer .

分析了摄象法热轧圆钢直径在线检测系统的误差，并给出该系统综合误差的补偿方法以及测量小型棒材的综合测试结果。CCD摄象法测量有机聚合物光波导传输损耗

Furthermore , a relative monitor system is built and the comprehensive compensation error of the photographic method is given . Lastly , the diameter measuring results of small hot bar are presented . CCD Camera Photographing in Detecting the Propagation Attenuate Coefficient of Polymer Waveguides

介绍一种用于有机聚合物LED微弱电流的自动测量装置。装置将测量参数估计理论与T形负反馈电阻网络相接合以实现高准确度微弱电流自动测量。

A new computer-controlled apparatus for weak current measurement of organic / polymer light-emitting diode ( LED ) is proposed , in which the estimation method of parameters combining with T-type negative feedback resistance network is used to realize , a high accuracy and automatic measurement of the weak current .

在实验研究的基础上，论述了采用工业石膏（CaSO4·2H2O）和有机聚合物对自来水厂污泥进行双重调解进而脱水的方法。

This study provides experimental data to demonstrate the effectiveness of a combination of gypsum ( CaSO_4 · 2H_2O ) and an organic polymer in alum sludge conditioning and dewatering .

利用有效折射率法（EIM）理论设计了有机聚合物脊形光波导结构，并分析光波导中传输的模式场，确定出光波导结构的适宜尺寸范围。

The structure of the polymer rib optical waveguide is designed by using effective index method ( EIM ), and the mode field distribution in these waveguides is analyzed to determine the suitable structural size range .

利用有效折射率法、有限差分束传播法对有机聚合物脊型波导进行仿真分析，得出M-Z光波导中脊宽、分支角等对传输特性的影响。

The transmission characteristics affected by the ridge width and branch angle of the M-Z waveguide are simulated and analyzed by the effective index method ( EIM ) and finite difference beam propagation method ( FD-BPM ) .

在试验研究的基础上对比了无机聚合物硅酸盐和有机聚合物聚乙烯醇（PVA）、部分水解聚丙烯酰胺（PHPA）和非水解聚丙烯酰胺（PAM）的防塌能力；

On the basis of the experiment research , the authors compare inorganic polymer silicate with organic polymer such as polyvinyl alcohol ( PVA ), partially hydrolyzed polyacrylamide ( PHPA ) and non-hydrolyzed polyacrylamide ( PAM ) on the capability of collapse prevention .