曲板

平板与曲板系统的SEA参数数值研究

Numerical Study on SEA Parameter between Plate and Curved Plate

中面内边界条件对圆柱曲板弹性屈曲的影响（H）（？）

The Influence of Boundary Condition In-Plane on Cylindrical Panels Elastic Buckling Under the condition :( H ) (?)

PPC异形曲板中无粘结筋应力增长研究

A study on stress increase in unbonded tendons for partially prestressed concrete slabs of irregularity curved shapes

基于Kármán-Donnell型非线性壳体方程，给出带压电作动器混合层合圆柱曲板在机械荷载、电荷载和热荷载作用下的后屈曲分析。

A compressive postbuckling analysis is presented for a laminated cylinderical panel with piezoelectric actuators subjected to the combined action of mechanical , electrical and thermal loads .

本文采用动态松弛法（DR法）研究了正交铺设复合材料叠层曲板在单向均匀轴压位移作用下的非线性稳定特性。

In this paper , dynamic relaxation method ( DRM ) is applied to study the nonlinear stability behavior of cylindrically curved cross ply under panels uniaxial uniform compressive displacement .

用动态松弛法（DRM）研究了铺层顺序对受均匀单轴压力的不对称十字叠层圆柱微曲板稳定问题的影响。

Dynamic Relaxation Method ( DRM ) is applied to study the influence of ply stacking sequence on the stability behavior of cylindrically slightly curved panels of unsymmetric cross ply composite materials subjected to uniform uniaxial compression .

基于修正的一阶剪切变形理论，利用Hamilton原理导出包含横向剪切变形和转动惯量的复合材料长圆柱曲板的非线性动力方程；

In this paper , basing on the revised first order theory of transverse shear deformation and having considered the rotational inertia and initial geometric imperfections , the nonlinear dynamic equations of the long composite cylindrical panels have been derived by the use of the Hamilton s principle .

夹层圆柱曲板的非线性自由振动解析解

Analytical Solution for Nonlinear Free Vibration of Cylindrically Curved Sandwich Plates

边界条件对层合圆柱曲板后屈曲的影响

The influence of boundary conditions on postbuckling of laminated cylinder shell

全各向异性圆柱形叠层长曲板在联合载荷下的稳定性

Stability of layered anisotropic long cylindrical panels under combined loading

剪弯耦合对非对称角叠层曲板稳定性的影响

The influence of shear-bending coupling on stability of unsymmetric angle-ply laminated panels

复合材料叠层圆柱曲板振动分析的半解析解

Semi-Analytical Solution for Free Vibration of Laminated Composite Cylindrical Panels

复合材料加筋圆柱曲板总体失稳分析及试验研究

General buckling and test analysis of composite stiffened cylindrical panel

负责控制辊压板和曲板的品质。

Quality control of roll formed and curved panels .

双轴载荷比对含裂纹加劲曲板剩余强度的影响

Influence of Biaxial Loading on the Residual Strength of Cracked Stiffened Curved Panel

一类锥形曲板侧压稳定性的试验研究

The experiment research on a kind of truncated-conic plate

复合材料层合剪切圆柱曲板在侧压作用下的后屈曲

Postbuckling of Pressure-Loaded Shear Deformable Laminated Cylindrical Panels

复合材料叠层曲板在轴压位移下的非线性稳定特性研究

Study on the nonlinear stability behavior of cylindrically curved panels of laminated composite materials

复合材料层合扁曲板的轴压屈曲和初始后屈曲分析组合荷载作用下非完善层合板后屈曲分析的半解析法

Post-buckling of Imperfect Laminated Plates Under In-plane Compression and Lateral Loads by a Semi-analytical Approach

均匀外压下纵横加筋曲板和圆柱壳的稳定性

The Stability of Longitudinal and Transverse Stiffened Cylindrical Plates and Shells under Uniform External Pressure

相应的奇异摄动法，用于确定圆柱曲板的屈曲荷载和后屈曲平衡路径。

A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths .

由于船体曲板焊接变形的复杂性，曲板焊接变形的预测一直为焊接变形预测的一个难点。

As welding deformations of curved hull block is complex , its is difficult to predict its deformation .

该机构由带轮齿的曲板、齿轮、轴承及其他配合件组成。

The mechanism comprises a curved plate with gear , a gear , sixteen bearings and other fit-tings .

将壳体屈曲的边界层理论推广到复合材料层合剪切圆柱曲板受侧压作用的情况。

A boundary layer theory of shell buckling , which includes the effects of nonlinear prebuckling deformations , large .

数值结果表明，压弯耦合刚皮系数的符号对该类叠层微曲板的稳定特性的影响是显著的。

The numerical results show that the effects of sign of compression-bending coupling coefficient on the stability behavior of the panels are significant .

作为算例，研究了边界条件对各向同性圆柱长曲板剪切稳定性的影响。

As an example , the influence of boundary conditions on stability of long cylindrical curved panel subjected to shear has been studied .

对板、曲板等算例的计算结果表明，用磁致伸缩材料作约束层可使层合结构损失因子提高。

The results show that the loss factor of a laminated structure is stepped up by using magnetostrictive material as the constrained layer .

加筋圆柱曲板承载能力计算和实验结果比较复合材料的多层、夹层和加筋圆柱曲板的稳定和振动

The comparison of bearing capacity of stiffened cylindrical panels between calculations and experiments stability and vibration of laminated , sandwiched and stiffened cylindrical panels

以等效受剪板代替上述的后屈曲板，则可利用常规有限元法进行该结构分析。

The panels have been treated as equivalent shear panel , then the cove-ntional finite element method can be employed in the analysis of this structure .

讨论了横向剪切变形，曲板几何参数，铺层数，铺展方式和初始几何缺陷等各种参数变化的影响。

The effects played by transverse shear deformation , panel geometric parameters , total number of plies , fiber orientation , and initial geometric imperfections are studied .