显微镜分析

激光共聚焦显微镜分析细胞色素c（CytochromeC，CYTC）的释放。

Cytochrome c ( Cyt c ) release was assessed by confocal laser scanning microscopy .

结晶高聚物PET和PBT电子显微镜分析

Analysis of crystalline polymer pet and PBT with electron microscope

采用化学成分、X衍射和电子显微镜分析等方法研究了高掺量粉煤灰固结材料的矿物组成及微观结构。

Mineral composition and microstructure of fly ash_high cementitious materials were studied by such means as chemical analysis , XRD and SEM .

使用光学显微镜分析了硫酸钙晶体形貌，使用XRD分析了复合粉体的组分，使用SEM分析了复合陶瓷降解前后的形貌。

The composite powders were studied by XRD and the morphologies of composites before and after degradation were studied by SEM .

X射线衍射、扫描电子环境和原子力显微镜分析表明了所沉积的薄膜具有良好的结晶学和表面形貌，没有第二相的存在。

The analysis of XRD , SEM and AFM indicated that the films have good crystal tropism and surface morphology , and no any second phase appeares .

并用NanoScopeⅢ型原子力显微镜分析了退火前后薄膜的表面形貌，发现退火后的薄膜质量明显提高，薄膜变的更加致密。

The thin film quality was improved and the structure was more compact after annealing by analyzing its superficial appearance using Nano Scope ⅲ - type atomic force microscope .

利用原子力显微镜分析了ZnO薄膜在具有本征氧化层的Si（100）和Si（111）基片上的表面形貌随沉积时间的演化。

Atomic force microscopy has been applied to study the morphological evolution of ZnO film on Si ( 100 ) and Si ( 111 ) substrates with a native oxide layer .

用X射线衍射仪和透射电子显微镜分析了MoS2纳米颗粒的相组成和微观形貌；

The crystallite composition and micro-morphology of the resulting MoS_2 nanoparticles were analyzed by means of X-ray diffraction and transmittance electron microscopy .

同时利用该脂肽物质经水热法合成的纳米ZnO，经扫描电镜和电子显微镜分析，和利用CTAB合成的纳米ZnO相比，具有更小的粒径和较好的分散稳定性。

Compared to CTAB , the size of nano-ZnO particles using lipopeptide prepared in this study as dispersant is smaller by scanning electron microscopy and electron microscopy analysis .

对这种纳米粒子进行X射线衍射和电子显微镜分析测试，提供了确定纳米颗粒新型核-壳结构的实验依据，并通过热分析仪器测试分析了试样的热学性能。

The experimental bases for determining the new core-shell structure of nanoparticles were provided by XRD and TEM analysis and test . The thermal characters of carbon-coated Al powders were tested with thermal analysis instruments .

用透射电子显微镜分析（TEM）和红外光谱分析（FT-IR）研究纳米粒子分散状态和稳定机制。

Dispersion morphology and stability principle of nanoparticles were analyzed by the use of transmittance electron microscopy ( TEM ) and Fourier transform infrared spectroscopy ( FT-IR ) .

通过电子显微镜分析V、Ti在岩相中的含量，找出了钒钛钢渣与普通钢渣熔化规律差别的原因。

Through analyzing the content of V and Ti in slag lithofacies by electron microscope , the reason why melting temperature of slag with vanadium and titanium oxides was lower than common slag was discovered .

接枝物的偏光显微镜分析发现，接枝支链的生成可以促进PP的异相成核，造成晶粒细化。

The result of the polarized microscope analysis of the grafted PP showed the heterophase crystal nucleation of PP was induced by the formation of graft branched chain , resulted in fine crystal grain .

采用潮湿SO2气体加速腐蚀，并配以显微镜分析是一种方便、快速的连接器镀金微孔率检测方法。

A quick and convenient method for measuring the porosity of gold plating on connectors is to accelerate corrosion with wet SO2 gas and to analyze with a microscope .

本文是在DM-300B型真空蒸发镀膜机上，采用真空蒸发-氧化法制备了CIO薄膜，并用X射线衍射、扫描电子显微镜分析了薄膜的组成成分和表面形貌。

The CIO thin film is prepared by vacuum evaporation utilized the on the DM-300B vacuum evaporation coating machine , and is analyzed by the X-ray diffraction , scanning electron microscope .

结果①流式细胞术分选后共聚焦显微镜分析技术（PSC）能同时、准确地鉴别不同细胞周期时相的凋亡细胞和非凋亡细胞。

Results Post-sorting confocal ( PSC ) method could exactly distinguish apoptotic and non-apoptotic cells in the specific cell cycle phases at the same time .

通过设置一系列固化压力历程以产生不同水平的孔隙率，采用超声C扫描、显微镜分析和酸解法对孔隙的分布、形状、尺寸和体积含量进行了定性和定量表征。

A set of cure pressures were applied to produce various void contents . Qualitative and quantitative characterization of porosity in terms of void distribution , shape , size and volume fraction was carried out by ultrasonic C-scan , microscopic analysis and acid digestion methods .

采用化学分析、X射线衍射、光学显微镜分析、扫描电镜、探针和差热失重分析等手段对湖北大冶灵乡镇岩峰白云石原料进行了化学、矿物及热物理性能分析。

The chemical composition , mineral structure and thermal physical performance of Yanfeng dolomite have been researched by chemical analysis , X ray diffraction analysis , optical microscope analysis , SEM analysis , electron micro probe analysis and differential thermal analysis .

Fe-Mn-Si形状记忆合金在不同热机械循环条件下γ→ε马氏体相变的电子显微镜分析

Electron microscopic analysis of martensitic transformation γ→ε under different thermo mechanical cycling in an Fe Mn Si shape memory alloy

扫描隧道显微镜分析表明，沉积的In原子优先吸附在台面上沿着台阶内边缘的位置，并在两个Si的二聚体链之间形成稳定的In二聚体。

High-resolution scanning tunneling microscopic images reveal that the deposited In atoms preferentially form In dimers between the two neighboring Si dimer rows on the lower terrace along the step edge , due to the high coordination of these positions .

本文在建立糖皮质激素作用的大鼠的体内模型基础上，采用TUNEL染色，经激光共聚焦显微镜分析、透射电镜观察等方法，研究糖皮质激素对大鼠生精细胞凋亡的作用。

In order to investigate rat spermatogenetic cell apoptosis treated with glucocorticoid in vivo apoptotic spermatogenetic cells labeling by TUNEL were observed by laser confocal microscopy and by electronic microscopy .

透射电子显微镜分析表明，包覆样品YAG：Ce3+荧光粉颗粒的表面上包覆了一层均匀的连续的致密的薄膜，此薄膜由能谱测试确定为SiO2膜层。

The TEM images indicated that a compact homogeneous film which was confirmed as SiO2 film by energy spectrum analysis was coated on the surface of YAG : Ce3 + phosphor particles successfully .

通过扫描电镜和光学显微镜分析等手段，对MgO-C砖的导电机理进行了探讨，并提出了导电模型。

The conductive mechanism was studied by means of SEM and optical microscope analysis , and the conductive model of MgO-C brick was established .

研究了冷气动力喷涂方法（CGDS）制备PTC陶瓷欧姆接触Al电极的喷涂工艺，用扫描电子显微镜分析了电极的显微结构。

Cold Gas Dynamic Spray processes for the ohmic contact between Al electrode and PTC ceramics are studied . Microstructural analysis of Al electrode has been preformed by SEM techniques .

在以上研究的基础上，选择涉及断裂点好发部位的畸变利用AFM分析，观察损伤热点的结构变化，并与光学显微镜分析结果进行比较。

On the basis of these work , AFM was used to analyze the translocations occurring frequently and observe the structures of hot damage point . The results were compared with the optical microscopy finally .

利用吸水量法研究HG处理剂对水泥砂浆的抗渗性影响，借助扫描电子显微镜分析试块表面结构。

Surface structure of cement mortar specimen treated with HG treating agent was analysed by SEM and effects of HG treating agent on impermeability of cement mortar were investigated by way of water absorption quantity method .

文章对Q345C钢板表面产生的裂纹进行了宏观和光学显微镜分析。

The Q345C surface checks are analyzed with macroscopic and microscopic examination .

结合磨损表面的扫描电子显微镜分析，给出了EMP复合材料磨损的主要过程，并据此解释了该材料的上述现象。

Meanwhile , the main wear mechanism , which could be used to explain the friction and wear process of EMP composite , were given by means of SEM photographs of worn surface .

原子力显微镜分析还表明了，我们所制备的样品薄膜的表面为高斯型随机表面。最后，我们分析了衬底温度对Er掺杂的ZnO薄膜结构和表面形貌的影响。

Atomic force microscopy analysis also showed that the surface of our thin film samples that we prepared is a Gaussian random surface . Finally , we analyze the influence of substrate temperature to the structure and surface morphology of Er-doped ZnO thin film .

VEGF-C主要表达于乳腺癌细胞的胞浆，阳性产物为鲜艳的棕黄色颗粒状，通过光学显微镜分析免疫组化染色的结果。VEGF-C与淋巴结转移呈正相关性。

VEGF-C expression in primary breast cancer cell cytoplasm , the positive result for the bright brown granular analysis of the optical microscope immunohistochemical staining results VEGF-C and lymph node metastases were positively correlated .