摇臂钻床

Z3050X16（W）型摇臂钻床控制系统设计

The Design of Control System of Z3050X16 ( W ) Radial Drilling Machine

Z3050（Ⅰ）型液压摇臂钻床变速故障诊断法

The Diagnostic Ways of the Hitch of Changing Speed of Z3050 (ⅰ) Type Hydraulic Pressure Radial Drilling Machine

PLC在摇臂钻床电气控制中的应用

Application of PLC to Electric Control System of Rockerarm Drilling Machine

文章介绍了用PLC对Z3040摇臂钻床实行电气控制的方法，并对该系统的硬件组成和软件设计作了阐述。

The article introduces the electrical control of Z3040 radial drill with PLC and explains the hardware and software design of the system .

摇臂钻床数控改造的电气设计

The Electric Design for Optimizing the Numerical Control of Rockerarm Drilling Machine

适用于摇臂钻床加工内孔环形槽的特种装置

Special Devices Suitable for Machining the Annular Tank by Using the Radial Drilling

摇臂钻床简易数控系统设计

Design of Numerical Control System of Rockerarm Drilling Machine

中捷友谊厂新系列摇臂钻床的防漏措施

Leakage preventative of New Series Radial Drilling Machines in China Czechoslovakia Friendship Works

滑座式万向摇臂钻床（起重机）升降支臂用滑轮组

Slide block universal radial drilling machine pulley-block luffing gear

GB/T4017-1997摇臂钻床精度检验

Radial drilling machines & Testing of the accuracy

摇臂钻床内立柱的优化设计

Optimum design of internal column of radial drill

摇臂钻床加工弧齿锥齿轮

Curve-tooth bevel gear machining on radial drilling machine

结合面参数识别方法在摇臂钻床模型上的应用

The application of parameter identification method for joint surface to radial drilling machine model

大型摇臂钻床滑座轴微机控制系统的研制

Design of a microcomputer-controlled system of the slide axis of a large-scale Rocker Arm Driller

摇臂钻床的镶套修理

Repair by insetting case of radial drill

滑座式万向摇臂钻床

Slide block universal radial drilling machine

本文对奥氏体不锈钢厚管板在普通摇臂钻床上钻削管板孔的工艺作了一个介绍。

This report given an introduction on technology of austenitic stainless steel drilling by ordinary radial drilling machine .

电驱动钻机的直流电动机选型摇臂钻床数控改造的电气设计

Selection of DC motor for electric drive drilling rig The Electric Design for Optimizing the Numerical Control of Rockerarm Drilling Machine

Z30130X31型摇臂钻床属于大型立式钻床，其传统的控制方式是利用继电器接触器原理控制。

Z30130X31-arm drilling is a large vertical drilling , the traditional control method is the use of relay contacts Principle control .

并分析了超声振动钻削装置设计中的一些关键技术问题，为在摇臂钻床上加工小直径深孔提供了一种新的工艺方法。

Some key techniques were analyzed when designed vibration device , and a new method was put forward for small-diameter deep holes .

悬臂式纵轴掘进机截齿分布研究及仿真摇臂钻床主轴箱体气孔产生原因及消除措施

Cantalever Vertical Axis Roadheader Bit Distribution Studying and Simulation ; Reason Causing Blowhole in Headstock Housing of Radial Drilling Machine and its Prevention

垫板钻孔：垫板钻孔采用摇臂钻床配合专用钻模加工保证最终尺寸要求。

The drilling of base plates : Using radial drilling machine in combination with special drilling processing to ensure the final dimension requirement .

摇臂钻床主轴箱体气孔产生原因及消除措施发动机配气机构凸轮与摇臂的改进设计

Reason Causing Blowhole in Headstock Housing of Radial Drilling Machine and its Prevention Optimization of Cam and Rocker Arm of Engine Valve Train

介绍利用自制专用工具，用摇臂钻床加工管板大直径管孔的方法；并以一实例加以说明该方法在加工大直径管孔上的可行性及实用性。

This paper introduces the way to turn big diameter holes by rocker drill-press , and analyses its feasibility and applied value though an example .

介绍了利用摇臂钻床对汽车门窗框样件进行实际测量，并运用计算机将测量结果绘制成曲线的方法。

Measurement for automobile door and window sample parts are made on a radial drill and curves are drawn by means of computer with the data measured .

对车床的总体布局进行了设计，提出了采用立式车床布局和摇臂钻床布局结合的方案。

And then , the overall layout of the lathe is designed with proposing the project which combines the vertical lathe layout with radial drilling machine layout .

为了满足轮毂孔的位置要求，介绍了在摇臂钻床上使用的简易钻模的结构原理、操作过程和特点。

In order to meet the requirements for the position of hub hole , the paper introduces the structure principle , operation process and characteristics of simple drilling jig used in the beam drill .

钻床也许被分为三种一般类型：立式钻床、多轴钻床和摇臂式钻床。

The drilling machines may be classified into three general type : Vertical spindle , Multiple Spindle , and Radial Spindle machines .