推力轴承

富士电机推力轴承及其结构特点

The Design of Large Thrust Bearing for Fuji Electric Machine

如何提高静压推力轴承的刚度是目前非常迫切的任务之一。

How to improve the stiffness of hydrostatic thrust bearing is one of the most urgent missions now .

磁悬浮推力轴承三电平PWM开关功率放大器设计

Design of Three-Level PWM Switching Power Amplifier for Magnetic Suspension Thrust Bearings

LEC型推力轴承回油结构与节能效果

Oil Feed - back Structure and Save Energy Effect of LeG Thrust Bearing

三峡左岸电站VGS机组推力轴承分析

Analysis of VGS Unit Thrust Bearing for Three Gorges Left-bank Power-plant

分别用电磁力理论公式和整体模型的有限元方法计算分析了电磁推力轴承的位置刚度和电流刚度随推力盘偏移量x的变化规律及影响因素。

The change rule and effect factors of the position stiffness and current stiffness of magnetic thrust bearing with displacement of thrust collar are calculated and analyzed by theoretical formulae and finite element method ( FEM ) .

采用SuperSap有限元分析软件包对核岛主泵主副推力轴承弹性支承的强度和刚度进行了数值分析计算，得出了一些有价值的结论。

With the finite element analysis software-SUPER SAP , Strength and stiffness analysis are made for the elastic supports of bearings in main pump of nuclear power station and some worthy conclusions are got .

用LEG型推力轴承替代JHJ型（S型）推力轴承时，应该注意改变原轴承的回油结构.LEG；

When JHJ ( S ) thrust bearing is replaced by LEG style , the oil feed - back structure should be changed .

通过应用于推力轴承试验台的实测中，该油膜厚度VXI检测系统显示了良好的性能。

According to the actual application of operating experiment in the thrust bearing test board , the designed oil film thickness VXI measuring system shows better performance .

用求解系统周期解分岔的庞加莱牛顿弗洛凯（PoincareNewtonFloquet，PNF）法，对推力轴承的动力系统稳定性进行了研究。

The Poincare Newton Floquet ( PNF ) method for investigating the bifurcation of the periodic solution of system is used to study the dynamic system stability of thrust bearings .

对Alstom公司三峡小支柱簇双层瓦试验推力轴承进行了热弹性流体动力润滑性能有限元分析。

The thermo elastic hydrodynamic lubrication performance of Three Gorges test thrust bearing with pins and double layer system for Alstom have been analyzed by the finite element methods .

800MW汽轮机推力轴承温度超标原因分析及处理

Analysis of Temperature Super-standard of Thrust Bearing on 800 MW Steam Turbine and its Treatments

通过应用振动分析方法，对设备进行现场实时分析、振动测量趋势分析与FFT动态诊断，准确判断出空透机推力轴承因振动频繁损坏的根本原因。

Real time analysis , vibration measurement trend analysis and FFT dy - namic inspection of an air turbine were carried out using vibration analysis method . Damage reasons of thrust bearings in the air turbine due to frequent vibration were exactly deter-mined .

Φ5500mm圆盘造球机推力轴承采用稀油润滑的寿命测算

Calculating Life of Ball Thrust Bearing in Ф 5 500 mm Rotary Disk Type Pelletizer with Oil Lubrication

在25t立式动压推力轴承实验台上实测了中心支承扇形可倾瓦推力轴承多种工况的润滑参数，包括油膜的厚度、压力、温度等等，还进行了减瓦实验。

The Lubricating Parameters ( including the thickness , pressure and temperature of the oil film ) of centre pivot sector tilting pad thrust bearing are measured in a 25-ton test bed under various operating conditions and in some pads absence .

介绍了700t级塑料瓦推力轴承的运行、安装及调整，给出了塑料瓦的检查方法和试验方法，提出了今后对塑料瓦的改进意见。

Operation , installation and adjustment of 700 tons plastic pads are introduced , the methods of checking and testing plastic pads are given , and the improving ideas for plastic pads in the future are raised .

通过在1000t推力轴承试验台上进行的4种推力轴承支承结构钨金瓦的试验结果的分析与对比，论述支承结构对水轮发电机推力轴承性能的影响。

The paper deals with the effect of support structures on the performance of hydrogenerator 's thrust bearings through the analysis & comparison of the testing results for the babbit bush of four thrust bearing support structures obtained on 1000t thrust bearing test stand .

大型水轮机推力轴承支架结构优化设计

Optimal Construction Design of Thrust Bearing Support in Large Hydraulic Turbines

复合材料瓦面推力轴承弹性模量的研究

Study on the modulus of elasticity of composite pad bushed thrust-bearing

大功率汽轮机可倾瓦推力轴承的研究探讨

Research and Discussion of Pivoted Shoe Bearing for Large Steam Turbine

水轮发电机组推力轴承在线监测仪试运行情况

Trial Operation of the Monitor-on-line for Thrust Bearings of Hydraulic Generators

GB/T273.2-1998滚动轴承推力轴承外形尺寸总方案

" Rolling bearings Thrust bearings Boundary dimensions , general plan "

推力轴承塑料瓦的设计运行与技术分析

Design , Operation & Technical Analysis of EMP-segment in Thrust Bearing

推力轴承油膜厚度测量方法概述

The methods for measurement of lubricant film Thickness of thrust bearing

双托盘支承钨金瓦推力轴承的试验研究

Test and Research on Thrust Bearing with Double-disk Supporting Babbit Pads

弹性金属塑料推力轴承瓦的设计与运行

Plain bearings-Bimetallic bushes with plastic overlay Design and Operation of EMP-Segments

园形可倾瓦推力轴承的边界元计算

The Calculation of the Boundary Element of the Circular-pad Thrust Bearings

水轮发电机托瓦支撑推力轴承的润滑计算

The Lubrication Calculation of Thrust Bearing With Pivoted Supports for Hydrogenerator

超声波悬浮推力轴承承载能力及减摩性能

Bearing capacity and anti - friction behavior of ultrasonic vibration bearing

配合型球形静压推力轴承的油膜挤压效应分析

Analysis of oil film squeeze effect in spherical hydrostatic thrust bearing