工业齿轮油
- 网络CKC;Industrial Gear Oils;Meropa;L-CKB
-
硫-磷型中负荷工业齿轮油系列产品的研制
Investigation of sulfur - phosphorus type medium-duty industrial gear oils
-
680中、重负荷工业齿轮油的研究
Study on 680 medium & heavy duty industrial gear oils
-
寒区工业齿轮油理想添加剂应由粘度指数改进剂、降凝剂、S-P型极压抗磨剂、酚型抗氧剂及苯三唑脂肪胺盐等组成。
The ideal additives for industrial gear oil in cold area should be comprised of improver of viscosity index , pour point depressant , S-P extreme pressure wear inhibitor and benzo-triazole fatty amine .
-
介绍了CKD重负荷工业齿轮油在冶金行业减速齿轮箱的应用情况,国产CKD重负荷工业齿轮油可以代替进口油,使用周期超过1年。
The application of CKD heavy - duty industrial gear oil on reduction gearbox is introduced in metallurgical industry , the service period of domestic CKD heavy - duty industrial gear oil , which can replace the imported oil exceeds a year .
-
添加剂对工业齿轮油性能影响的研究
Study on effects of additives on the performances of industrial gear oil
-
工业齿轮油使用中的问题及解决办法
The problems in the use of industrial gear oil and the solution
-
环境友好型工业齿轮油的润滑特性研究
Study on Lubricating Behavior of Environment Friendly Industrial Gear Oil
-
680号中重负荷工业齿轮油的性能与应用
Performance and application of # 680 middle / heavy duty industrial gear oil
-
工业齿轮油的发展趋势与应用
The Application and Development Trend of Industry Gear Oils
-
复合添加剂在超级工业齿轮油中的应用
Application of complex additive in super industrial gear oil
-
工业齿轮油抗磨损性能的区分性考察
Distinctiveness Investigation of Anti-wear Property for Industrial Gear Oils
-
添加剂组成对寒区工业齿轮油性能的影响
Effectiveness of Additives Composition to the property of Industrial Gear Oil Cold Area
-
对现行工业齿轮油有关标准的探讨
Probe into Currently Industrial Gear Oil Related Standards
-
工业齿轮油已经更新换代,反应膜取代了吸附膜;
The industrial gear oil had upgraded , replacing absorption film by reaction film .
-
硫磷型极压工业齿轮油的性能及其应用
Characteristics and Applications of Sulph-Phosphorus EP Gear Oil
-
工业齿轮油承载能力与极压添加剂特性的关系
Relationship between carrying capacity of industrial gear oil and characteristic parameters of its extreme pressure additives
-
利用重负荷车辆与工业齿轮油中试验检验了润滑油的的润滑性能。
The performance of lubrication oil was examined by heavy-duty vehicles and industrial gear oil test .
-
利用南阳油研制150~中负荷工业齿轮油
Research and development of formulation of 150 ~ # medium duty industrial gear oil from Nanyang oil
-
探讨了利用工业齿轮油添加剂的特性预测工业齿轮油承载能力的现实性和可行性。
The feasibility of predicting carrying capacity of industrial gear oils with characteristic parameters of extreme pressure additives has been discussed .
-
选择合适配比,可调试出符合要求的各种寒区工业齿轮油。
If proper composition rate is selected , various brands of industrial gear oil suitable for in cold area can be blended .
-
工业齿轮油广泛用于各种圆柱齿轮、斜齿轮、正齿轮及直、斜、螺旋伞齿轮等齿轮传动装置。
Industrial gear oils are extensively used for various gear transmission devices , such as column , bevel , spur gears and etc.
-
另外,对工业齿轮油在实际使用中的质量监控、换油依据也做了介绍,供用户参考。
In addition , for the reference of the clients , the quality supervision and the oil drain basis are introduced also .
-
采用磷之星-120开发出超级工业齿轮油复剂,并使用超级工业齿轮油复剂调制出超级工业齿轮油。
A kind of super industrial gear oil complex additive was developed and a kind of super industrial gear oil was formulated using the complex additive .
-
试验结果表明:研制的低温重负荷工业齿轮油具有优异的承载能力,良好的剪切稳定性,良好的氧化安定性和低温流动性。
The test results showed the formulated oil possessed high load-carrying ability , excellent shear stability and oxidative stability , as well as low temperature fluidity .
-
介绍了兰炼研制并开发生产的680号中、重负荷工业齿轮油产品的性能分析评定结果及在相关工业设备上的使用情况。
The performance analysis and evaluation of # 680 middle / heavy duty industrial gear oil developed and produced by Lanzhou General Refinery and the application of this oil on the rel evant industrial equipment are discussed .
-
研究了硫化烯烃、磷酸酯胺盐、硫磷酸酯极压抗磨剂,含氮杂环衍生物多功能添加剂和防锈剂等,对工业齿轮油抗乳化性能、极压抗磨性能、防锈性能的影响;
Effects of different additives such as sulfurized olefin , mixtures of amine phosphates , ester thiophosphates , N-containing agents and ashless rust-resistant agents on the emulsion stability , EP / AW properties and rust-resistance of industrial gear oil were studied .
-
我国工业齿轮油质量已达到或接近国际先进水平,但在实际使用中由于受到高温、高负荷、操作条件的变化以及外来物的污染,会发生质量衰变;
The quality of domestic industrial gear oils has reached or approached the international advanced level . However , the quality may decay in the practices because of high temperature , high load , and the change of operation conditions as well as the pollution of external materials ;
-
经理化分析、模拟试验及齿轮机试验,油品质量水平符合GB5903《工业闭式齿轮油》规格,且达到USS224指标。
The physical-chemical properties , simulated test and FZG test results indicated that the said industrial oil met the requirements of not only GB5903 but also USS224 .
-
工业闭式齿轮油标准化研究
A Study on Standardization of Lubricants for Enclosed Gear Systems
-
GB5903-1995工业闭式齿轮油
Gear oils for industrial enclosed gear drives