义齿

731例种植义齿临床疗效分析

The clinic curative effect analyse of 731 case planting false tooth

CAD/CAM技术在义齿快速成形中的应用与发展

Application and development of CAD / CAM technology in the rapid formation of false tooth

在有缺失牙的地方，牙齿种植可以通过固定桥等辅助措施替代局部义齿。

Where some teeth are missing , dental implants may be used to eliminate the need for a removable Partial denture by providing the support necessary for attachment bridge .

Comfort义齿粘附剂的毒性评价

Toxicity assessment of comfort denture adhesive Medical adhesive Flatting Agent

CT扫描建立下颌后牙固定义齿三维有限元模型后的应力分析

Stress analysis of three dimensional finite element model of fixed denture on mandible posterior teeth by CT scanning

基于义齿压力检测的MEMS电容式压力传感器的研制

Development of MEMS Capacitance Sensor Based on Pressure Artificial Denture

义齿基托树脂PMMA的化学改性研究

Study on modification of PMMA denture base resin

真空电弧离子镀膜方法沉积类金刚石膜在PMMA树脂义齿表面的应用

Application of deposited DLC film by vacuum cathodic arc on PMMA resin denture surface

方法采用OT球帽状附着体为15例患者设计制作18件义齿。

Methods 18 pieces removable dentures with OT-CAP attachments were made for 15 patients .

蓝色硬石膏灌注的模型加工出的隐形义齿临床发生压痛症状的比超硬石膏模型加工出的义齿要明显多。P0.05。

Adelomorphic denture made with models poured with blue hard gypsum has more pressure pain incidence than that with anhydrite ( P0.05 ) .

弹性树脂固位体与PMMA基托联合应用改善传统活动义齿的美观

Elastic resin retainer used with PMMA base plate to improve the esthetics of traditional removable partial denture

本研究借助CT扫描成象及ANSYS软件建立了叶状种植体支持的全下颌牙种植固定义齿三维有限元模型。

In this study a three dimensional finite element model of complete blade implant-supported fixed prosthesis of the mandible was developed aided by CT scan and ANSYS software .

目的评价自行研制的Comfort义齿粘附剂（ComfortDA）的临床效果。

Objective The purpose of this study was to evaluate the clinical effect of the new developed form of Comfort denture adhesive ( Comfort DA ) .

目的比较总义齿（CD）、覆盖义齿（COD）和种植覆盖义齿（IOD）修复后的患者满意度。

ObjectiveTo compare patients'satisfaction with complete dentures ( CD ), complete overdentures ( COD ) and implant-supported overdentures ( IOD ) .

全口义齿着色问题的初步探讨BPS全口义齿修复的临床研究

Staining of Complete Denture : A Preliminary Clinical Study

目的：探讨应用Super-BondCB粘结材料在固定义齿修复中的临床效果。

Objective : To study the application of Super-Bond CB in fixed prosthesis .

通过计算机辅助设计（CAD）的数字化基托模型，在自主研制的激光快速成形系统上，选取优化的激光快速成形工艺参数，制造了全口义齿钛基托。

Based on the computer aided design ( CAD ) digital base of complete denture model , a titanium base was made with the RS-850 laser rapid forming system , which processing parameters were suitable .

RGD序列与种植体骨整合目的通过临床实践探讨影响钝钛种植体骨整合界面形成的因素，寻求防治措施，提高种植义齿的成功率。

Correlative Progress between RGD and Implant Osseointegration Objective To analyze the effect of clinical factors on implant osseointegration formation .

目的评价Protefix○R义齿稳固剂改善总义齿固位的临床效果。

Objective To evaluate the clinical effect of Protefix ~ (○ R ) Denture Adhesive paste on improving fixing efficiency of complete dentures .

作者自1992年以来为376例患者施行人工牙种植术，共植入625枚CDIC牙种植体，修复了818个牙单位的种植义齿。

Since 1992 , 625 implants had been implanted to 376 cases by the author .

目的：评价天然牙和种植体联合支持局部固定义齿（FPDs）的临床修复效果。

Objective : To investigate the clinical results of tooth_implant supported fixed partial dentures for 3 years .

揭示相同直径不同长度或相同长度不同直径种植体支持式固定局部义齿（FPD）的应力分布规律。

Objective The stress distribution of the implant fixed bridge with implants of different diameter or length was investigated in the study .

论文的第一部分报告了两种义齿软衬材料（热固化义齿软衬材料和光固化义齿软衬材料）的研制和它们与义齿基托树脂（PMMA）的粘接研究。

In the first part , a heat & curing and a visible hight-curing soft denture liners have been developed . Their adhesion to denture base material ( PMMA ) are also investigated .

方法建立牙颌计算机三维模型并以其为基础，采用个别建模、组合模拟的方式，运用3DSTUDIOMAX对可摘局部义齿各类部件单元在统一坐标下进行三维建模。

Methods On the basis of having established a computerized 3-D model of defect dentition , 3D Studio Max was used to reconstruct a series of 3-D models of elements for removable partial dentures under the same coordinating system .

提出了用IGES数据接口进行义齿CAD系统与CAM系统的集成，并对IGES的文件格式进行了研究，为以后IGES接口的开发奠定了基础。

Put forward that integrate the CAD system with CAM system by the IGES interface , and studied on the format of the IGES files for its development in the future .

目的：临床研究KennedyП类牙列缺损采用MK1精密附着体义齿进行修复的效果。

Objective : To evaluate the effect of clinical application of MK 1 universal attachment denture on Kennedy ⅱ dentition defect .

用USSA语音频谱分析系统对不同磨光面外形全口义齿患者的语音分析

Analysis of the phone of complete dentures with varions polished surfaces on USSA digital sonagraph

结论非埋藏式种植体（ITI）支持球型固位覆盖义齿在下颌无牙牙合修复中有很高的成功率。

Conclusions The non-submerged osseointegrated ITI dental implants with ball attachments supporting overdentures can be a successful treatment in the edentulous mandible patients .

目的：分析RPI卡环固位可摘局部义齿在垂直、水平和斜向加载条件下义齿的基牙及基托下支持组织的应力分布情况。

Objective : To evaluate the stress distribution of RPI removable partial denture under the vertical load , horizontal load and oblique load .

本文详述了利用双三次B-spline曲面拼接义齿模型的算法及其特征网络控制顶点反算方法，并给出具体实验数据及处理结果。

The abutting algorithm of false tooth geometrical model with bicubic B-spline curved surface and its anti algorithm of characteristic network controlling vertex are described in detail . The concrete experimental data and its processing results are given .