主程序

用Visualc++6.0ADO技术实现主程序和数据分离

Separating main program from data by Visual C + + 6.0 ADO

c：主程序，以及一些进行输入、输出和错误处理的函数

Ccalc . c : The main program and some functions for input , output , and error processing

本文提出了一种基于DSP基波提取的混合型谐波检测改进方案设计，设计了系统DSP主程序软件，并解决了实际运行中易受到的抗干扰问题。

An improved design scheme based on fundamental component extraction using DSP is presented in this paper .

下位机软件运行在DOS操作系统下，用C语言开发，包括主程序、定时中断子程序和封装的函数库。

The software for client runs under DOS operation system and is developed with C language .

在CCS中对控制系统软件进行设计，选用PID控制方法并采用模块化的设计方案实现主程序的编写，最终实现了对机器人的控制。

Control system software is design in CCS and PID control method is selected .

其AES算法的实现通过主程序AES。

The AES algorithm was implemented by main function AES .

软件采用汇编语言及C语言编写，给出了系统主程序及各子程序的流程图。

The control software is being programmed with C and assembly language . And then , the flow charts of main program and each interrupt program are given .

DSP控制软件主要分主程序、定时器中断服务程序和AD转换中断服务程序。

The DSP control software is roughly divided into main program , timer interrupt service routine and AD conversion interrupt service routine .

对队列执行join操作，实际上意味着等到队列为空，再退出主程序。

Join on the queue , which really means to wait until the queue is empty , and then exit the main program .

通过Matlab与Fortran的接口，实现控制子程序与发动机仿真主程序的数据交互。

And the data alternation between control subprogramme and main routine was achieved through the interface of Matlab and Fortran .

Java程序由类来形成结构，COBOL程序有不同的“区段”，C程序有一个主程序以及多个子程序。

Java programs are structured with classes , COBOL programs have various " divisions ," and C programs have a main program with subroutines .

就主程序与虚拟场景间的通信技术，Web数据库的访问技术，客户端文件的上传等3个方面的关键技术进行了研究，并给出了实现机制。

This paper researched into and implemented three key technologies including technology of communication between main program and virtual scene , technology of access to Web database , and technology of client-side files uploading .

主程序以及后处理程序的开发采用了MATLAB语言，并与商品化软件进行了比较，获得了满意的结果。

The main program and post-process program have been developed by MATLAB language , and satisfied result has been got by comparing with the commercial software also .

分别采用C和VHDL语言开发了DSP和FPGA模块，并提供了主程序及采样中断程序流程。

DSP and FPGA modules are developed with C and VHDL languages respectively . Flowcharts of the main program and the sampling interruption program are provided .

文中给出了机械改进示意图，PLC的电气硬件图，主程序框图及部分子程序。

The sketch map of mechanical improvement , the electrical hardware plan of PLC , the frame of main program and partly subprogram are showed in the paper .

重点阐述了试验台的控制程序包括主程序、自动测试程序、PID加热控制程序等的实现过程。

It attaches great importance to expound the implementation procedure of control programs of the test-bed , including main program , automatic test program and PID heating control program .

在引用三维可视化编程库时，将Openinventor的C++代码做成导出DLL供主程序调用。

When referencing three-dimensional visual programming library , the paper makes Open Inventor C + + code to export DLL for the main program calling .

在AIXshell提示中，它使用三个命令编译程序，一个命令生成一个可执行主程序并运行该程序。

At the AIX shell prompt , it takes three commands to compile the programs , one command to generate an executable main program and run it .

本文主要介绍单色光控制器的主程序设计、串行通讯程序设计及DDS读写程序设计。

The main program of the Homochromy Optical Controller , the program of serial communication and the program of DDS are introduced .

文中着重介绍了IP电话的实现方法和低功耗电路设计思想，给出了IP电话机的整体框图和部分电路图以及主程序设计框图。

In this paper , the designing method and work theory of IP telephone are introduced especially . At the same time the circuit diagram and main program design frame are presented .

软件设计主要包括运用C语言和汇编语言混合编程的主程序、控制模块子程序、控制器区（局）域网CAN（ControllerAreaNetwork）总线通信子程序、中断服务子程序等程序软件的设计。

The software of system realized by programming mingled C language and assembly language is made up of the main program , control module subprogram , CAN ( Controller Area Network ) communication subprogram , interrupt service routine subprogram , etc.

软件部分主要包括平面倒立摆控制主程序、DSP初始化子程序、电机控制子程序、小车位置和摆杆转角测量子程序等。

The software consists of the main program of planar inverted pendulum control , DSP initialization subroutine , motor drive subroutine , cart position and pendulum angle measurement subroutine , and so on .

接着，在分析了软件开发环境的基础上，按照模块化的设计方法，设计了DSP的主程序及相关的功能子程序。

Then the printed circuit board was designed . Then , after analyzing software development environment based on the modularization design method , the DSP procedures was designed and other relevant function subroutine .

服务器主程序就是在驱动程序的基础上，为各个播放终端提供MP3文件的下载服务。

And the server program is based on the device driver so that the playing term can download mp3 files form the server .

根据热丝TIG焊的时序要求，设计了控制系统的软件，重点介绍了主程序和中断服务程序。

The software for control system was designed according to the timing requirement , the main program and the interrupt service program were highlighted .

大多数C编译器不会使用该STAB（它们希望调试器假设该名称是主程序的名称），但是一些C编译器会发出NMAINSTAB来获得主函数。

Most C compilers do not use this STAB ( they expect the debugger to assume that the name is main ), but some C compilers emit an N_MAIN STAB for the main function .

软件采用C语言编写，实现了无位置传感器控制算法及转速和电流双闭环矢量控制；给出了系统主程序和PWM中断处理程序流程图。

The software has been programmed with C. Sensorless PMSM dual close-loop vector control with feedback of speed and current are realized . The flow charts of main program and PWM interrupt service routine are given .

并利用高度集成化的Borlandc++工作平台作为编程工具，设计了主程序和温度、压力采集子程序。

With Borland C + + , we developed the main program and temperature / pressure collect subprogram .

本文详细地介绍了系统在单通道、多通道工作模式下DSP主程序设计、DMA中断服务程序设计及基于PCI总线的驱动程序的设计。

The paper introduces the main DSP program and the DMA interrupt service program in single channel and multi-channel modes , also it describes the design of PCI device driver .

它是通过无线通信协议，以无线标记语言编写主程序，采用动态连接的方式调用VC++的时间通信程序来完成WAP手机的无线接时。

The program is written with WML and VC + + and the wireless time service is completed using wireless application protocol and dynamic link .