打纬

dǎ wěi
  • beating-up;blow of the slay;beat-up;battening
打纬打纬
打纬[dǎ wěi]
  1. 从1515有梭织机和ZA型喷气织机的机架和筘座的振动测量出发,比较了两种四杆打纬机构的结构、运动学参数和动态性能。

    The article , starting with the oscillating measure of the loom frame and the lay of 1515 shuttle loom and ZA-style air-jet loom , compares the structures , kinematics parameter and dynamic performance of two kinds of four-bar linkage beating-up mechanisms .

  2. 本文主要以WG-2000型喷气织机后梁系统为研究对象,分析开口、打纬、松经运动及后梁的摆动对经纱变形及经纱张力的影响。

    This dissertation makes the back rest system of type WG-2000 air-jet loom as the research object , analyzes the influence on warp deformation and warp tension by shedding motion , beating-up motion , warp loosing motion and back rest oscillating motion .

  3. 四连杆打纬机构的Fuzzy优化设计

    The Fuzzy Optimization Design of the Four-link Weft Beat-up Mechanism

  4. 最后利用优化后的结果在ADAMS软件中构建六连杆打纬机构的虚拟样机模型,通过仿真得到期望的运动特性。

    The virtual prototype model of 6-link beating mechanism is constructed in ADAMS with the optimal design , and an expected kinematical characteristic is achieved at last .

  5. 最大打纬力Pmax的计算;

    The maximum beat - up force calculation ( Pmax ) .

  6. 1511B型毛巾织机六连杆打纬机构的设计分析

    Design of Six-level Beating Mechanism on 1511B Terry Loom

  7. 介绍了G1613型剑杆织机引纬系统的组成,对引纬系统的引纬和打纬等机构的运动规律进行了分析与讨论。

    This paper introduces the construction of weft insertion motion of rapier loom G1613 , and analyses the movement regulation of weft insertion and battening .

  8. 利用Pro-E软件对剑杆织机的主要部分进行建模。如机架系统模型、空间四连杆引纬、共轭凸轮打纬机构实体模型、送经卷取机架结构与开口机构实体模型等。

    The main parts of rapier loom is modeled by Pro / E , such as loom frame model , spatial four-link weft , conjugate cam beating model , let-off and take-up system , and shedding mechanism model .

  9. 四连杆打纬机构最大加速度的分析

    An analysis of the maximum acceleration on Four-bar Linkage Beating-up Mechanism

  10. 弹性打纬研究

    Study on Elastic Beat-Up with Constant Action Force on Cloth Fell

  11. 探讨一种喷气织机四连杆打纬机构的动平衡方法。

    The beat-up mechanism is a key component of the loom .

  12. 共轭凸轮打纬机构分析与优化

    The Analysis and Optimization of Conjugate Cam in Beating-up Mechanism

  13. 共轭凸轮打纬机构从动件的运动规律

    Types of follower motion of Conjugate Cam in beating & up mechanism

  14. 无梭织机共轭凸轮打纬机构的设计

    Design of the Beating Mechanism with Active Cams on the Shuttless Loom

  15. 四连杆打纬机构尺寸偏差对运动误差的影响

    Influence of Measurement Deviation Upon Motion Error for Four-Bar Linkage Beating-Up Mechanism

  16. 织机连杆打纬机构的分析

    Analysis of the Linkage Beating - up Mechanism for Looms

  17. 打纬区宽度的研究

    Research on the Size of the beat & up zone

  18. 用运动转置法设计四连杆打纬机构

    Designing the Four-bar Linkage Beating-up Mechanism by the method of kinematic inversion

  19. 喷气织机双侧四连杆打纬机构动态分析

    Dynamic Analysis of a Two-side Four-bar Beating-up Motion of an Air-jet Loom

  20. 织机打纬凸轮机构的动力学响应

    The Dynamic Response of Cam Mechanism in Loom Weft Knitting

  21. 织机凸轮式打纬机构动态响应研究

    A study on the dynamic response of cam beat-up mechanism of looms

  22. 织机六连杆打纬机构的优化设计及仿真

    Optimal Design and Simulation on 6-link Beating-up Mechanism for Looms

  23. 四连杆打纬机构的筘座前心位置分析

    Analysis of reed-base ′ s front extreme position for four-bar beating-up linkage

  24. 电刷镀技术在天马-11织机打纬凸轮修复上的应用

    The Application of Repairing Beating Cam in Loom TIANMA-11 with Electronic Brushing Plating

  25. 片梭织机打纬系统的改进设计

    Improved Design of Slay System of Projectile Weaving Machine

  26. 双支点六连杆打纬机构的设计

    Synthesis of a Six-Bar Beat-up Mechanism with Two Fulcrums

  27. 剑杆织机共轭凸轮打纬机构的计算机辅助设计

    The CAD of Conjugating-Cam Beating-woof Mechanism in Sword-bar Loom

  28. 四杆打纬机构的运行监测和故障诊断

    Vibration Monitoring and Fault Diagnosis of 4-Link Beat-Up Mechanism

  29. 高速织机四杆打纬机构的优化平衡

    Optimum balance of four-bar beat-up mechanism of high-speed looms

  30. 喷气织机改造为喷水织机时打纬机构的运动设计

    Kinematic Design of Beat-up Mechanism for Water-jet Loom Series Modified from Air-jet Looms