鼓风炉熔炼

  • 网络Blast furnace smelting;ISP
鼓风炉熔炼鼓风炉熔炼
  1. 第三章给出了密闭鼓风炉熔炼过程故障诊断系统的设计方案;

    Chapter 3 describes the design of ISP fault diagnosis system .

  2. 以密闭鼓风炉熔炼过程为研究对象,采用自适应组合集成技术将神经网络NN和灰色理论有机结合的方法建立了密闭鼓风炉透气性预测模型。

    Based on gray theory and neural network , the breathing capacity predication model of an imperial blast furnace was constructed by self-adaptive integration technology according to the melting process in an imperial blast furnace .

  3. 在鼓风炉熔炼铜镍特富矿中,从焦率和渣中CaO含量、SiO2/Fe等方面探讨渣中镍铜此,从而提高金属回收率的途径。

    In blast furnace smelting process , copper to Nickel ratio in slag were researched by coke ratio , CaO content and SiO2 / Fe in slag , to search a way for raising metals recovery .

  4. 论文主要进行了密闭鼓风炉熔炼过程GO-STOP专家系统及基于模糊神经网络推理故障诊断系统的研究。

    Hi this thesis , GO-STOP expert system and fault diagnosis system based on Fuzzy Neural Network are mainly discussed .

  5. 鼓风炉熔炼富铅渣预控系统的程序开发及应用

    Program Development Application of Pre-control system for smelting in Blast Furnace

  6. 鼓风炉熔炼粗铜的启动

    The Initiation of Raw Copper Smelting with A Blast Furnace

  7. 铅鼓风炉熔炼配料最佳化的研究

    Study on optimal burdening of the lead blastfurnace smelting

  8. 铜锌混合精矿的密闭鼓风炉熔炼

    Copper Zinc Concentrate Smelting in Sealed Blast Furnace

  9. 鼓风炉熔炼富铅渣工艺流程三维动画演示系统

    The 3D Animation Demonstrating System for the Process of Smelting Lead-rich Slag by Blast Furnace

  10. 在密闭鼓风炉熔炼过程中锗铟的富集及综合回收

    Enrichment and comprehensive recovery of germanium and indium in smelting process of the closed blast furnace

  11. 高斯消元法在鼓风炉熔炼富铅渣预控系统中的应用

    Application of Gauss Elimination Method in Pre-control System of High Lead Slag Smelted by Blast Furnace

  12. 本文以韶关冶炼厂铅锌密闭鼓风炉熔炼过程为背景,介绍了密闭鼓风炉熔炼过程炉况智能监视及预报系统的研究和设计方法。

    In this thesis Intelligent Monitoring and Predicting System of ISF conditions in Shaoguan Smelt is designed .

  13. 密闭鼓风炉熔炼技术是生产铅锌的重要方法。

    Imperial Smelting Process ( ISP ) is a process available for production of Zinc and Lead .

  14. 铜镍特富矿鼓风炉熔炼炉渣镍铜比探讨

    Research on Copper to nickel Ratio in Blast Furnace Slag of High Grade Copper & Nickel Ore

  15. 通过综合分析与论证,选择了压团&炼铜密闭鼓风炉熔炼工艺。

    Through comprehensive analysis and discussion , the process of briquetting-smelting by closed-top blast furnace for copper smelting is selected .

  16. 文章在此新工艺基础上研究编制了鼓风炉熔炼富铅渣的预控程序。

    Based on research of the new technology , pre-control program for smelting enriched-Pb slag in blast furnace was put forward .

  17. 烧结块软化点是影响密闭鼓风炉熔炼过程的一个关键因素。

    The softening point of sinter is a key factor that affects the smelting process of Imperial Smelting Furnace ( ISF ) .

  18. 已经有许多的研究和实验,但鼓风炉熔炼高铅渣的计算机模型国内外却很少或没有人对此进行过尝试。

    But the calculating model of blast furnace treating of the slag has had little work to be done inside or outside of our country .

  19. 随着铅的消费和用量迅速增加,传统的烧结焙烧&鼓风炉熔炼冶铅方法由于其自身的缺点而不能满足现代社会的工业发展要求。

    With the consumption of lead increase rapidly , traditional processes of lead metallurgy : sintering-blast furnace treatment hasn 't satisfied with the modern industry development for some problems .

  20. 密闭鼓风炉熔炼过程是一个反应机理复杂,非线性、时变、耦合严重,难以用传统的数学模型描述的复杂系统。

    Imperial Smelting Furnace ( ISF ) smelting process is a very complex system with nonlinearity , time variety , coupling and uncertainty and very difficult to express conventional mathematics functions .

  21. 以及在高铅渣成分变动时产物各相组成,从而可对鼓风炉熔炼高铅渣提供一些有益的参考和预测作用。

    At the meantime , objective variations can be controlled better by adjusting input ones , which may provide some good references and the predictive role for blast furnace treatment of the high lead slag .

  22. 将现有的控制理论应用于鼓风炉熔炼过程,进行基于锌产量的鼓风炉熔炼过程炉况优化的研究,对提高密闭鼓风炉的生产率,减少污染,增加企业的市场竞争能力有重要意义。

    It is important to do research work on operational optimization of ISF status based on Zn-output by applying control theory into ISF smelting process , which can improve the productivity , reduce pollution and make plants more competitive .

  23. 介绍宁波东方铜业公司采用烧结-鼓风炉熔炼处理二次铜精矿直接产出粗铜的冶炼工艺,生产实践证明该工艺稳妥可靠、技术先进、经济效益好。

    The paper introduces the sinter-blast furnace smelting process to produce rude copper with regenerating copper concentrate , commissioning shows it be reliable in process , advanced in technology , good economic benefits and be worth application and dissemination .

  24. 烧结块软化温度不仅影响密闭鼓风炉熔炼过程中软熔带的分布和透气性指数,而且还影响密闭鼓风炉的炉况和送风时间。

    The softening temperature of sintering is an importance parameter that influences the outputs of the ISF , which affects not only the distributing of soft-melting zone and permeability in ISF , but also the furnace status and blast time .

  25. 铅锌密闭鼓风炉熔炼过程生产环境恶劣、反应机理复杂,具有多变量、非线性、大滞后、强耦合的特点,使得熔炼过程信息存在一定的不确定及不完整性,即存在信息的不完备性。

    The Lead-Zinc Smelting Process of Imperial Smelting Furnace is a complicated process with complex mechanism , bad environment , multi-parameters , strong nonlinear , time varying and time-delay , strong coupling , and there exists incomplete and uncertain information in the process .

  26. 鼓风炉挥发熔炼锑金精矿工艺探讨

    Volatilization Smelting Technical Discussion on the Antimony-Gold Concentrate in Blast Furnace

  27. 密闭鼓风炉铅锌熔炼的统计过程监测系统设计

    Statistical monitoring system design for imperial smelting furnace of Pb-Zn smelting process

  28. 降低铜密闭鼓风炉富氧熔炼四氧化三铁影响的生产实践

    Practice of reducing influence of fe_3o_4 on oxygen-enriched air copper smelting in closed blast furnace

  29. 硫化铅精矿烧结焙烧是火法炼铅工艺的主要工序之一,铅烧结块质量的好坏将直接影响鼓风炉还原熔炼过程和铅的回收率。

    The sintering of lead sulphide concentrate is one of the most important procedures in lead extraction by pyrometallurgy .

  30. 上述工作表明,本文所建立的鼓风炉还原熔炼模型能够较好的描述鼓风炉熔炼高铅渣的过程。

    Those demonstrated that the formed-model in this paper can basically interpret the process for the high lead slag smelting in blast furnace .