铁素体钢

  • 网络Ferritic steel;RAFS
铁素体钢铁素体钢
  1. 用于超临界水堆燃料包壳的ODS铁素体钢的研究进展

    Progress of Using Oxide Dispersion Strengthened Ferritic Steels as Fuel Cladding Materials in Supercritical Water Reactor

  2. 机械合金化对ODS铁素体钢粉末的微观形貌和结构的影响

    Effect of mechanical alloying on the microstructural properties of powder particles for oxide dispersion strengthened ferritic steels

  3. ODS铁素体钢中微裂纹形核过程的TEM原位观察

    In situ observations of microcrack nucleation in ODS ferritic steel

  4. 介绍了GB/T19744-2005铁素体钢平面应变止裂韧度KIa试验方法标准的有关技术内容,对将来应用有一定的指导意义。

    Introduce the GB / T19744-2005 standard test method plane-strain fracture toughness of ferritic steel .

  5. P92铁素体钢焊接接头;高温时效;力学性能;组织稳定性。

    P92 ferritic steel welded joint , fracture toughness , thermal aging , mechanical property , structure stability .

  6. 采用室温离子注入和低压电镜原位观察的方法,研究了注氢对国产ODS铁素体钢微观结构的影响。

    The effect of hydrogen ion implantation on the microstructure of ODS ferritic steel was studied by means of ion implantation at room temperature and in-situ observations in a low voltage electron microscope .

  7. 铁素体钢焊接热影响区脆化的研究

    Study of Embrittlement of the Welding HAZ of Ferritic Stainless Steel

  8. 回火工艺对针状铁素体钢组织和性能的影响

    Effect of Temper on Microstructure and Mechanical Properties of Acicular Ferrite Steel

  9. 超细晶铁素体钢的力学性能及成形性能研究

    Study of mechanical properties and forming properties of ultra-fine grain ferrite steels

  10. GB/T8363-1987铁素体钢落锤撕裂试验方法

    Metallic materials & Drop-weight tear tests of ferritic steels

  11. 超细晶铁素体钢的强度

    The Strength of Ultra - fine Grained Ferrite Steel

  12. 奥氏体不锈钢与铁素体钢的焊接性能分析研究

    Weldability Analysis for Austenitic Steel and Ferritic Steel

  13. 时效处理对极低碳针状铁素体钢组织和力学性能的影响

    Effects of aging on Microstructure and mechanical property of ultralow carbon acicular ferrite steel

  14. 针状铁素体钢的动态应力-应变行为

    Dynamic stress-strain behavior for acicular ferrite steel

  15. 对针状铁素体钢进行540~630℃回火后的组织、性能进行了研究。

    The microstructure and properties of acicular ferrite steel tempered from 540 ℃ to 630 ℃ were studied .

  16. 大型球罐用低碳针状铁素体钢成分组织性能的研究

    Research on Chemical Composition , Microstructure and Mechanical Properties of Low Carbon Acicular Ferrite Steel for Spherical Tank

  17. 该钢种是铁素体钢,不存在异类钢焊接难点和焊接接头过早失效的倾向。

    As a ferritic steel , it can avoid the difficulty of welding and failure of welding joint .

  18. 结果表明,这种管线用针状铁素体钢热轧板材具有较优良的强韧性能,其显微组织与焊接组织在形态上有很大的差异。

    The experimental results showed that hot-rolled plates of the acicular ferrite steel for line pipe possess excellent strength and toughness behaviors .

  19. 研究结果表明:在磁场热处理铁素体钢或珠光体钢时,磁场能够显著地促进钢的传导传热、加速钢材的冷却、细化铁素体晶粒。

    The effects of magnetic field on heat conduction of ferritic and pearlitic steels in the magnetic field heat treatment were studied .

  20. 新一代钢铁材料为晶粒尺寸在微米或亚微米级的铁素体钢,其强度比普通铁素体钢提高一倍,同时又具有较好的韧性。

    New generation steels have double strength and higher toughness than the normal ferrite steels because of their micrometer or sub-micrometer sized grains .

  21. 异种金属焊接接头广泛应用于压水堆核电站一回路系统中,主要用于铁素体钢制承压容器接管嘴和奥氏体不锈钢主管道的连接,是核岛主设备发生失效的薄弱环节。

    Dissimilar metal welded joints are widely used in primary water systems of pressurized water reactors in nuclear power plants , which are mainly used to join the ferritic steel pipe-nozzles of the pressure vessels to the austenitic stainless steel safe-ends .

  22. 此外,由于高Cr铁素体耐热钢具有出色的抗辐照性能,其还是核电站结构部件的候选材料。

    Additionally , they are also the potential candidate for structural steel in nuclear reactors because of its outstanding irradiation resistance .

  23. 对火力发电锅炉用高Cr铁素体耐热钢焊接材料及其近来趋势做了概述。

    This paper outlines welding consumables of high Cr ferritic heat resistant steels used for steam power boilers and its recent trend .

  24. 得出结论如下:(1)对自行研发的新型高Cr铁素体耐热钢进行了组织分析和力学性能测试。

    Results as following : ( 1 ) Microstructural analysis and mechanical properties testing of the modified high Cr ferritic heat-resistant steels was carried out .

  25. 新型高Cr铁素体耐热钢的正火组织主要由高密度位错的马氏体板条和少量的δ-铁素体组成。

    The normalized microstructure of the modified high Cr ferritic heat-resistant steels is composed of martensitic laths with high density dislocation , and a small quantity of δ - ferrite .

  26. 从理论上研究了TiN在430铁素体不锈钢钢液中和凝固过程中析出的热力学条件。

    The thermodynamics of TiN precipitation in liquid steel of 430 ferrite stainless steel during its solidification was calculated to find out the condition of TiN precipitation during the initial solidification stage .

  27. X70针状铁素体管线钢的优点暨恶劣环境下油气输送管道工业的发展

    The Advantage of Spicular Ferrite Pipeline Steel X70 The Development of Transmitting Oil Gas Pipeline Industry in Atrocious Weather

  28. 409L铁素体耐热钢的制备和研究

    Preparation and Investigation of 409L Ferrite Refractory Steel

  29. 研究结果表明,通过实验室模拟炉卷轧机的控轧控冷工艺,获到了组织性能优异的X65针状铁素体管线钢。

    The results show that the X65 pipeline steel with acicular ferrite produced by Steckel mill rolling has excellent mechanical properties .

  30. 成功研制了409L铁素体耐热钢,通过对其工艺和性能的分析研究,表明409L铁素体耐热钢具有良好的冷热加工性;

    The 409L ferrite refractory steel has been developed successfully . The investigation on its process and performance shows that 409L ferrite refractory steel has good hot-working property and cold working property and excellent weldability .