电缆故障

  • 网络Cable fault
电缆故障电缆故障
  1. 软件用C语言编写了相应的控制程序,最终实现了电缆故障的测距和定位系统。

    C language is used to complete the corresponding controlling code . Ultimately the cable fault diagnosis system is realized .

  2. 通过MATLAB仿真平台,建立了电力电缆故障系统的仿真模型,得出电缆故障波形图。

    Through the simulation platform of MATLAB , the paper establishes the power cable fault system simulation model and obtains the cable faults fluctuations in the end .

  3. activexautomation在电缆故障监测中的应用

    Application of ActiveX Automation techniques in cable monitoring system

  4. 根据整理出的电缆故障征兆与故障对应关系,利用模糊Petri网建立故障诊断模块。

    Based on the relationship between fault symptoms and faults , fault diagnosing model is established by applying fuzzy Petri Nets .

  5. 介绍了采用TDR方式(时域反射法)开发的信号电缆故障点检测仪。

    Introduces the signal cable fault locator detector developed on basis of TDR mode .

  6. 构建RBF网络结构,进行电缆故障诊断的相关训练和测试,从而有效地实现故障电缆的检测。

    RBF network structure is built and relevant practice and test of cable fault diagnosis are conducted , so that the detection of cable faults can be effectively achieved .

  7. 基于PC104的电缆故障智能识别系统

    Intelligent Identifying System of the Cable Faults Based on the PC 104 Bus

  8. 基于行波法的10kV电力电缆故障测距算法的改进研究

    Research on Fault Location Algorithm of 10 kV Power Cable Based on Traveling Wave

  9. 定义了基于灰度共生矩阵的参数R,给出了纹理特征参数R的提取方法,提出了基于图像处理的纹理特征参数R的电缆故障信号的识别方法。

    R parameter based on gray-level co-occurrence matrix is defined , the method of texture features R parameter extraction is given , and the cable fault signal recognition method based on R parameters of texture features image processing is proposed .

  10. 本文采用公共GPRS无线通信技术进行数据实时传输,将非变电站内的电缆故障点检测数据信息及时传输到变电站调度中心。

    In this paper , the GPRS wireless communication technology is adopt for real-time data transmission , within the non-substation cable fault detection and timely data and information transmitted to the substation control center .

  11. 为减小全球定位系统(GPS)同步时钟误差对双端行波测距的影响,使电缆故障在线测距能达到实用化水平,提出一种能够获取精确时标的高速同步采样方案。

    A synchronized high-speed sampling scheme is proposed , which can obtain high precise time to diminish the influence of GPS ( Global Position System ) clock error on two-terminal traveling wave fault locating for implementing on-line power cable fault locating .

  12. 介绍了110kV电缆故障测寻所采用的方法,以及测寻结果。

    This article introduces the fault location method for 110 kV cable and the results .

  13. 分布式光纤温度传感器(FODTsensor)用于地下电力电缆故障检测,可对阻性接地系统故障进行快速定位。

    In fault locating of XLPE insulated underground cable of resistance grounding system , the fiber optic distributed temperature sensor ( FODT sensor ) can be used to locate the fault position quickly .

  14. 文中指出了传统的脉冲电流测试法(ICE)电缆故障测距存在误差的原因,提出了电感式脉冲电流测试法(IICE)。

    The error for cable fault location using the traditional impulse current experimentation ( ICE ) is analyzed . A new type of so called inductance ICE ( IICE ) is further presented .

  15. 利用片上可编程系统(SOPC)设计了新型的通信电缆故障探测仪,给出系统设计的技术指标及总体设计方案,并完成了系统的整体设计。

    We used the system on a programmable chip ( SOPC ) to design a new type of communications cable fault detectors . Given system design specifications and overall design , we completed the overall design of the system .

  16. 采用了新开发的SD-9860电缆故障指示器,完成电缆故障的识别;

    The other new installation is SD-9860 , which is the monitor of the cable fault .

  17. 本设计基于硬件SOPC的实现方法,结合TFDR检测理论,可产生良好的探测发射波形并能够采集到良好的故障反射信号,可快速准确探测通信电缆故障点,实现通信电缆故障定位和类型判断。

    It can produce a good detecting transmission waveforms and also can collect the good reflected signal . Communication cable can quickly and accurately detect the point of failure and achieve communication cable fault location and type of judge .

  18. 开发了相应于多重线路的电缆故障定位系统。

    Cable fault location system for multiple circuit was developed accordingly .

  19. 顶管机多芯控制电缆故障检测

    Checking and Measurement of Trouble for Polycore-controlled Cable for Push Bench

  20. 因此,电缆故障的检测日益引起关注。

    Therefore , the cable fault detection has attracted increasing attention .

  21. 煤矿井下高压电缆故障的分析及处理

    Analysing and solving on high - voltage cable trouble in well

  22. 高压电力电缆故障分析及其探测技术

    Faults Analysis and Exploration Technique of High Voltage Electric Power Cable

  23. 具有远程定位功能的电缆故障监测系统方案

    A Scheme for Cable Malfunction Monitoring System with the Romote-location Funtion

  24. 基于小波的电缆故障在线定位分析研究

    Study on the Online Cable Fault Location Analysis Based on Wavelets

  25. 电力电缆故障分析与故障点定位研究

    Research of the Fault Analysis and Fault Location of Power Cable

  26. 电缆故障测试仪硬件的设计和实现

    Design and Implementation of the Hardware of a Cable - Fault Detector

  27. 电缆故障检测技术及实际经验浅谈

    Discussion on Cable Fault Detection Technology and it 's Experience

  28. 直埋高压电缆故障点查找分析初探

    Locating and Analysis of Faults in Direct Buried HV Cables

  29. 直流电桥法测量电缆故障点的距离

    Measuring the Distance between Cable Failure Points Using Direct Current Bridge Method

  30. 基于小波多分辨率分析法的电力电缆故障波形分析

    Analysis about application of wavelet in power cable faults location