热固化

水溶性丙烯酸酯树脂热固化反应研究

Study of thermal curing reaction of water-borne acrylic resin with hmmm

与传统的热固化成型技术相比，复合材料辐射固化具有快速、高效、低成本等优点，因而成为复合材料成型技术的热点之一。

Comparing with the traditional thermal curing molding technology , the irradiation curing of the composites has the advantage of high speed , high efficiency and low cost , so it is one of the " hot spot " of the molding technologies for the composites .

西门子PLC在油管防腐热固化炉上的应用

Application of Siemens PLC in Anti-corrosive Coatings for Oil Tube Curing Furnace

H（22）热固化瘤苗在荷瘤小鼠中的抗癌作用

Antitumor effects of heat-treated h_ ( 22 ) tumor vaccine in tumor bearing mice

DSC法研究脂环族环氧/硫鎓盐体系的UV及热固化过程

Study with DSC on the Curing of Cycloaliphatic Epoxy / Onium Salt with UV or Heat

本文对发展中的光纤保护性涂料进行了介绍，重点介绍了热固化和紫外（UV）光固化两大类光纤涂料的固化原理、组成特性、涂覆工艺及主要性能。

The protective coating for optical fibers was summarized in this review . The heat-cured and UV light-cured coating were reviewed in detail .

采用分段固化的方法研究了DBA单体的热固化行为；

The cure behavior of monomer DBA was investigated via a stepwise cure process .

NDV联合热固化瘤苗的抗肿瘤作用

Anti tumor Role of Combination of NDV and Thermic Solidified Tumor Vaccine in Rats

采用UV固化和热固化结合起来的双重固化体系对固化体系进行优化，探讨了光、热双重固化的原理及特点，以及对胶粘剂性能的影响。

Moreover , used dual-curing system to optimize uv-curing system . Effect of dual-curable system on properties of adhesive was studied and curing mechanism was discussed .

本文采用FTIR、TG和DTA等测试手段对有机硅耐磨涂料（有机硅溶胶）的热固化过程进行了详细的研究。

The thermosetting procedure of the abrasion-resistant organo-silicon coating ( organo-silicon sol ) was investigated with FTIR , TG and DTA .

DOVER系列低温固化胶是单组份、低温热固化改良型环氧树脂胶粘剂。

DOVER series low temperature curing adhesives are one part , low temperature heat curable epoxy .

目的探讨CpG寡核苷酸（ODN）联合热固化瘤苗的抗肿瘤作用。

Objective To investigate the anti-tumor effect of co-use of CpG ODN and hyperthermal solid tumor vaccine ( HSTV ) .

CpG寡核苷酸联合热固化瘤苗对肝癌细胞Hca-F荷瘤小鼠的免疫治疗研究

Experimental study on immunotherapy effect with co-use of CpG ODN and hyperthermal solid tumor in mice bearing Hca-F cells

论文的第一部分报告了两种义齿软衬材料（热固化义齿软衬材料和光固化义齿软衬材料）的研制和它们与义齿基托树脂（PMMA）的粘接研究。

In the first part , a heat & curing and a visible hight-curing soft denture liners have been developed . Their adhesion to denture base material ( PMMA ) are also investigated .

借助凝胶时间、DSC和TGA等测试研究了PN-PAA和MPN-PAA共混树脂的热固化过程和热分解过程。

The thermal curing and degradation of the blends of PN-PAA and MPN-PAA are studied via gelation , DSC and TGA techniques .

PN-PAA、MPN-PAA共混树脂热固化过程和热分解过程的研究

Study on Thermal Cure and Thermal Degradation of PN-PAA and MPN-PAA Blends

方法采用光固化、光固化+光固化、光固化+热固化，3种不同固化方法处理3M和贺利氏复合树脂，在万能验试机上测试抗压强度。

Methods The compressive strength change were determined by dealing with 3M composite resins and Herues composite resins by light cured , light cured + light cured and light cured + heat cured .

研究了PAE用量、热固化时间和温度对麻浆、桑皮浆和针叶木化学浆手抄薄型纸湿强度特性的影响。

The wet-strength properties of three thin handsheets made of hemp pulp , softwood pulp and mulberry pulp with the wet-strength resin ( PAE ) as the additive were studied .

透明涂料的双重固化（热固化和UV固化）为层面涂装和汽车的更多特种部件的发展提供了巨大的发展前景。因为其可能解决紫外固化的屏蔽区的固化不完全的问题[1]。

A high potential prospect in surface coating and more specifically for automobile bodies had provided by dual cure ( thermal and UV ) of clear coatings , where some drawbacks of UV curing could be overcome such as shadow area cure problem ~ () .

以自制可聚合大分子表面活性剂HTP与丙烯酸酯类单体进行无皂微乳液五元共聚，制备可热固化双亲聚合物。

Self-preparation polymerizable macromolecular surfactant HTP and acrylate monomer were used to prepare the amphiphilic polymer by soap-free microemulsion pentamer copolymerization .

目的探讨Luci-Sof热固化型硅橡胶软衬材料对全口义齿满意度的影响。

Objective To investigate the effect of heat-cured silicone soft denture liner ( Luci-Sof ) on satisfaction of complete denture .

EM体系的热固化反应活化能为84.85KJ／mol，固化反应的反应级数为0.849。

It indicates that the accelerant M is effective on 594 cured epoxy system and the apparent activation energy is 84.85kJ / mol , and the level of the curing reaction is 0 . 849 .

与K-35固化剂组合，形成热固化胶粘剂，即使120度也能保持很高的机械强度。

With hardener K-35 forms heat curing epoxy adhesive characterized by outstanding mechanical strength even at120 deg c.

为探讨新城疫病毒（简称NDV）联合热固化瘤苗对小鼠肿瘤的抑瘤作用和免疫调节作用，实验检测了荷瘤小鼠的抑瘤率和细胞免疫功能。

In this study , the role of newcastle disease virus ( NDV ) combined thermic solidified tumor vaccine in inhibiting growth of tumor and immune control was investigated , and rate of inhibiting tumor and cellular immunity were measured .

方法：测定80℃热固化，固化时间90min与室温固化23℃，固化时间24h两组油画颜料着色的硅橡胶试样的色度值（Lab），并计算试样间的色差值（ΔE）。

Method : To measure the chroma value ( Lab ) of two groups of silicone elastomer samples colored by oil paint : heating vulcanized at 80 ℃, 90 minutes and room temperature vulcanized at 23 ℃, 24 hours , and calculate Δ E value between the samples .

体系转化率为95%时，400W的微波只需10min即可完成固化，而热固化需要在150℃固化240min。

At a microwave power of 400 W , it took 10 minutes for EP / ANDPO system to cure completely , in contrast with 240 minutes at 150 ℃ in regular thermal curing .

研究表明，AS4/EB99-1复合材料可以在91℃（200F）湿态条件下使用，其综合力学性能达到了国外同类材料的水平，优于热固化T300/4211复合材料的性能。

The result show , AS4 / EB99-1 composites can be used at 91 ℃ on the hygrothermal condition . The comprehensive mechanical properties of AS4 / EB99-1 composites are more excellent than thermal curing T300 / 4211 composites .

实验结果表明，桐油在复合肥料颗粒表面经热固化后形成连续和附着良好的包膜层，包膜率为10.1%的桐油包膜复合肥料的80%养分释放时间可达到27d。

The experimental results show that tung oil on the surface of the compound fertilizer granules after heat solidification forms a continuous envelope with good adherence , and tung oil-coated compound fertilizers with a coating rate of 10.1 % have 80 % of their nutrients released in 27 days .

热固化基托树脂外源性着色的体外研究

Research on staining of heat - cured base resin in vitro

红外光谱法研究酚醛树脂热固化动力学

IR study on the kinetics of thermic curing of phenolic resin