电腐蚀

如何克服电腐蚀对化学工业设备和产品质量造成的不良影响

How to overcome the harmful effect made by electrocorrosion on chemical industry equipment and product quality

电腐蚀法制备n-Bi2S3光电极

The preparation of the n & Bi2 S3 photoelectrode by Galvanic Corrosion

基于抗电腐蚀的ADSS光缆挂点设计探讨

Design of ADSS ' Hanging Point Based on Anti-resisting Electric Corrosion

ADSS光缆电腐蚀的产生及预防

Discussion on the reason and prevention of electric corrosion for ADSS cable

浅谈ADSS线路的电腐蚀及挂点设计

Elementary Introduction about Electric Corrosion and Design of Suspending Points of ADSS Lines

就ADSS层绞式、中心束管式结构及抗电腐蚀的措施作了介绍并进行了性能比较。

The structure and measure of anti-electroetching for Central Table ADSS and Stranded ADSS are introduced and the performance is analysed .

电厂220kV断路器内部电腐蚀问题的分析及处理

Analysis and Treatment of Electricity Corrosion of 220 kV Circuit Breaker in Power Plant

简要分析了ADSS光缆电腐蚀故障的机理，提出了用静态和动态的概念来控制电腐蚀的条件及措施。

This paper concisely analyses the mechanism of electrical erosion of ADSS optical cable , puts forward the conditions and measures to control electrical erosion under both static and dynamic concepts .

对不同塔型的计算结果表明：软件中采用的算法合理，所得结果对ADSS的挂点选择和优化具有参考价值。浅谈ADSS线路的电腐蚀及挂点设计

Numerous computation results show that this method is reasonable and has very good agreement with practical results . Elementary Introduction about Electric Corrosion and Design of Suspending Points of ADSS Lines

外加直流电腐蚀钢筋引起混凝土破坏机理的研究

Study on Mechanism of Concrete Failure Induced by Steel Corrosion under DC

旋转机械中一种新的电腐蚀机理&轴电流腐蚀

A new kind of electrical erosion in rotating machinery : Shaft current

研究了直流电腐蚀对电解电容器阳极铝箔比容的影响。

Study on high specific capacitance of aluminum foil by multi-arc ion plating system ;

复合绝缘子耐电腐蚀特点及其电蚀老化区域性的差异

The Characteristic of Electrical Corrosion-proof of Composite Insulators and Its Regional Difference of Electrical Corrosion Aging

在杂散电流长期电腐蚀作用下，地下金属物体将受到严重的损坏，严重时可危及人身安全，研究多功能、多参数的杂散电流检测系统有现实意义。

In the long-term corrosive effect of stray current , the underground metal objects will be seriously damaged .

大型水电机组转子引线搭接轴引起轴承类似电腐蚀烧损

Burning of Bearing due to Similar Electric Erosion in Large Hydro Units Resulted from Attachment of Rotor Winding Leads to Shaft

给出不同分断速度下，燃弧时间、弧根位置分布、质量转移等电弧及电腐蚀参数与吹弧磁场的关系。

The relationships between the flux density and such parameters as arcing time , arc diameter , arc root position and mass variation are given .

防止方法有排流法和隔绝法，而最彻底的办法是在易发生电腐蚀的部位采用非导体。

Prevention includes current drainage and segregation , while the most thoroughgoing method is using nonconductors in places where electric corrosion is easy to occur .

电弧及电腐蚀机理极为复杂，理论研究十分困难，开发一套功能完备的开关电器电弧实验平台具有重要的实用价值。

The mechanisms of the arc and erosion are extremely complicated . As the arc and erosion characteristics take on strong randomness , it is pretty difficult for theoretical study . Therefore , it is of great practical value to design a fully functioned arc experiment platform .

关于电腐蚀主要论述了其形成和影响因素；线路设计重点是挂点的选择，并论证了高挂点方案有良好的经济性和高效性。

The demon - stration on the electric corrosion is mainly dealt with its forming and influence factors , while the key points for the line design is to select the suspension points with demonstration of good economy and high efficiency of the option with high suspension points .

阴极保护系统对外部构件电干扰腐蚀的计算

Calculation of interference corrosion on steel structures near cathodic protection system

脉冲电阳极腐蚀纳米多孔硅的蓝光发射

Blue photoluminescence of anode etched nm porous Si formed by square impulses current

使用紫铜丝制作线框电极，采用电火花腐蚀方法，以套型的方式加工模具型腔和型芯。

The cavity and core were trepanned with frame electrode made of copper wire by EDM .

电火花腐蚀用石墨电极

Graphite electrode for spark erosion

电连接腐蚀试验法与间浸轮分别挂片方法的比较研究

Comparative studies on the methods of hanging specimens connected electrically , INTERMIT-TENT immerse wheel and individually HANGING SPECIMENS

阐述了电火花腐蚀技术的概念、原理、发展史以及此项技术如何应用于管桩钢丝模具的加工。

To discuss the concept , principle , development history of technology of electric spark corroding and how to apply it to the processing of Hi-bond .

当外表面电位负于ET时，阴极电流流向闭塞区，缝内溶液的pH值增大到碱性，Cl－向外电迁移，腐蚀受到抑制。

While below ET , the cathodic current flowed into OCC , the pH . value of occluded solution increased and Cl-migrated from OCC to the outside , thereby stifling the occluded cell corrosion .

牵引变电所地网腐蚀与改造研究

Study on Re construction of Eroded Grounding Grid of Traction Substation

利用热释电和化学腐蚀方法，成功地实现了钽酸锂晶体的大面积畴反转。

Large-area domain inversion of LiTaO_3 is successfully realized proved by thermoelectric effect and chemistry etching method .

近些年来，阻抗法在电极反应机理、电沉积、腐蚀和化学电源等研究领域中有着越来越多的应用。

In recent years , the EIS method has been increasingly used in research fields such as electrode reaction mechanism , electro-deposition , corrosion and chemical power source .

本文提出了一种推算锌在强碱性电液中腐蚀速度的新方法，其计算结果和失重法相比较，基本一致。

In this paper a new way to determine corrosion rate of zinc in concentrated alkaline electrolyte is given and the results are accordant with the values determined by weight loss method .