测量齿轮

基于VB的渐开线圆柱测量齿轮的设计与验算软件

Development of Software for Designing and Checking Master Gear Based on VB

特殊测量齿轮磨损分析

Study on the Wear of Special Master Gear

单面齿轮啮合仪测量齿轮径向综合误差

The single-side gear engage instrument measures gear radial integrated error

测量齿轮M值圆柱直径的正确选择

Correct Selection of the Cylinders ′ Diameters as Measuring M-Values of Gears

用激光扫描法自动测量齿轮接触斑点

Automatic Measurement for Gear Contacting Spot with the Method of Laser Scanning

运用普通量具测量齿轮的几何参数

Measuring the geometric parameter of gear with usual measuring tool

齿廓啮合起始点计算及测量齿轮参数设计

The method of calculating gear wheel flank profile falling-at the initiation point

测量齿轮渐开线齿形误差的新方法

A New Method for Measuring the Errors of Involute Tooth Profiles of Gears

小齿形角渐开线蜗杆测量齿轮整体误差研究

Study on Measurement of Gear Whole Error With Small Pressure Angle Involute Worms

利用不完整齿条测量齿轮齿向误差

Measuring Gear Lead Error Using a Special Rack

测量齿轮的图形化设计方法

Visualization Design Method for Master Gears

试验结果表明修正技术可大大降低测量齿轮精度要求，能使工件的配对件作为测量齿轮。

Experimental results show that the correction makes the measurement possible without high accurate master gear .

为此，开发了一套测量齿轮设计与验算软件。

So , the software for designing and checking master gear is developed to simplify the design .

本文研究了齿轮啮合分离测试技术中测量齿轮的磨损特性，通过对测量时磨损规律的分析。

The character of special master gear wear for gear meshing and seperating technique is studied in this paper .

简述运用普通量具测量齿轮的基本几何参数，提高学生的实验能力。

To measure the basic geometric parameter of gear with the common measuring tool and increase the students ' experiment ability are introduced .

提出利用高精度测角仪测量齿轮副在啮合过程中不同啮合位置时轮齿受载综合变形的新方法。

In this paper , a new method to measure meshing composite deflections of loaded cylindrical involute helical gear by using high precision clinometer is presented .

在加工非渐开线螺旋齿轮时，用公法线千分尺测量齿轮的法向弦长是一个较好的方法。

In noninvolute helical gear treatment , it is a better method to measure the normal chord length of the gear by the gear tooth micrometer callipers .

针对小齿形角蜗杆测量齿轮整体误差的特点及其存在的问题，提出小齿形角蜗杆螺旋线误差补偿原理；

The helix error compensation principle of small pressure angle worm is proposed aiming at the characteristics of measuring gear integrated error with small pressure angle worm and its existent problems .

标准齿轮，也叫测量齿轮，是高精度齿轮检测仪上的计量基准，要求其传动精度非常准确，且其精度至少要高于被测齿轮2-3级精度。

As the measure benchmark of high precision gear detector , the master gear is required to have high transmission accuracy , which is higher than the gear detected by 2-3 grade .

采用刃边齿条测头，测量齿轮廓面的直母线偏差，通过误差分析分离出齿廓总偏差和螺旋线总偏差。

Adopting the engaging process of the measuring rack - probe , the error of straight generatrix is measured , and by error analysis , the tooth profile error and tooth orientation error can be obtained .

针对辽宁柴油机厂生产的4102型发动机凸轮轴上螺旋齿轮的精度检测问题，设计了一台测量齿轮径向综合误差的检测装置。

A measuring device , which is used to measure gear radial composite error , is designed to solve the accuracy measuring problem of camshaft screw gear fitted into the 4102 engine produced by Liao Ning Diesel Engine Plant .

主要介绍了采用计算机智能地测量齿轮齿圈径向跳动误差，编写了计算机程序对测量数据进行采集、处理、显示、分析与计算，最终得到了有效的结果。

This paper mainly introduces intelligent measurement diameter runout of pitch circle in gear by means of computer . We compile computer program to collect , process display , analyze and to calculate the measured data , at last to get an available result .

介绍一种测量大齿轮的简易工具。

A kind of easy measuring tool for big gear is introduced .

用滚齿机测量废旧齿轮的螺旋角

Useless and Old Gear Helical Angle Measurement with Hobbing Machine

用齿条刃边测头在机测量大型齿轮齿向误差

On-machine Measurement of Longitudinal Form Error of Bull Gears

齿条刃边测头在机测量大型齿轮直母线误差的原理与技术研究

Study on Principle and Technology of On-line Measuring Large Gears ' Straight Generatrix Errors

在机测量大齿轮齿形误差具有广阔的发展前景。

On-line measuring a tooth profile of a large gear has a good prospect .

齿条刃边测头在位测量大型齿轮齿形误差的基本原理及误差与变异分析

General principle and ERROR-VARIATION analysis of on-machine measuring large gear profile error with rack-head

齿轮范成误差的单啮误差分离测量法齿轮范成实验新模式的研究

A Separating Method from Single Composite Error for Measuring the Generating Error of Gears

用直角坐标法测量圆弧齿轮齿形误差

Study of measurement of tooth profile error of circular tooth gears by rectangular coordinates method