梯度功能材料

离心铸造Al-Fe-Si自生梯度功能材料韧脆变化的分形度量

Fractal Discrimination of Toughness-fragileness on Al-Fe-Si In-situ FGM by Centrifugal Casting

梯度功能材料的制备及应用评述

Review of The Preparation and Application of FGM

自蔓延高温反应合成Ti／Al2O3梯度功能材料

The synthesis of ti / al 2O 3 functionally gradient materials by SHS methods

Ti/Al2O3系梯度功能材料研究动态

Study on Ti / Al_2O_3 Functionally Graded Materials

激光加热在Al2O3/Ti系梯度功能材料制备过程中的作用及机理

Action and mechanism of laser spot heating in course of fabricating Al 2O 3 Ti functional gradient material

梯度功能材料薄壳动态热挠度的Laplace变换有限元分析

The Laplace Transform Finite Element Method for Thermal Shock Problems of Functionally Gradient Material Thin Cabinet

梯度功能材料（FGM）的出现为解决这一矛盾提供了有效的解决途径。

Functionally gradient materials ( FGM ) provide effective solution for this matter .

层压法制备双层晶粒WC-Co梯度功能材料的研究

Fabrication of Cemented Carbides with Gradient WC Grain Size by Lamination Pressing

SiO2/环氧（E（44））热膨胀性渐变的梯度功能材料（FGM）设计中的数学模型极其热应力分析

Mathematical model on the design of the SiO_2 / epoxy resin thermal expansion coefficient graded materials and stress analysis of FGM plates

叙述了梯度功能材料（FGM）的概念，结构特征以及制备方法。

The concepts , construction features and preparation methods of functionally gradient materials ( FGM ) were described .

TiC／Ni3Al系梯度功能材料在稳定状态下的隔热应力及其组成分布优化

Heat-isolated stress of a tic / ni_3al functionally gradient materials in steady-state and its compositional distribution optimization

梯度功能材料（FGM）是组成和性能呈连续变化的先进材料。

Functionally graded materials ( FGM ) are advanced in that their ingredient and structure show a continuous change .

W-Cu梯度功能材料的热物理性能

Thermo-physical properties of W-Cu functionally gradient materials

梯度功能材料（FGM）的数值模拟主要包括两方面的内容，一是显微结构决定的热物理性能模拟；

Numerical modeling study is one of the important respect for the design of functionally gradient materials ( FGM ) .

Cu-Al梯度功能材料性能研究

Property of Cu-Al Functional Gradient Material

论述了梯度功能材料（FGM）的产生、发展、制备技术及应用情况。

The generation , development and preparation of functional gradient materials ( FGM ) and their application are introduced in this paper .

介绍了SPS技术在制备纳米材料、梯度功能材料和高致密度、细晶粒陶瓷等方面的研究和应用。

Some applications of the SPS process , particularly in the fabrication of nano-materials , the functional gradient materials and the high-density fine-grain ceramics are reviewed .

采用Laplace变换有限元法分析了梯度功能材料薄壳结构的热冲击挠度。

In this paper , the thermal shock problems of thin cabinet made of Functionally Gradient Materials ( FGM ) are analyzed by Laplace transform finite element method .

自蔓延高温合成法制备梯度功能材料（一）&对TiB2-Al系的探索性研究

Functionally Gradient Materials Prepared by SHS Method ( 1 ) & Exploratory Study on TiB_2-Al System

TiC-Ni梯度功能材料的燃烧合成与残余应力分析

Combustion synthesis and thermal stress analysis of TiC-Ni FGM

回顾了近年来梯度功能材料（FGM）热应力研究领域所取得的研完成果，并展望了FGM热应力研究的发展趋势。

In this paper , the progress of thermal stress analysis of the FGM is reviewed and the development trends in this area are prospected .

对MgO/Ni系梯度功能材料（PCM），分别用实验和微观力学模型测定和计算了用于热应力缓和设计的各物性参数。

The material properties of MgO / Ni FGM used in the thermal stress optimization design during the processing were tested and calculated by a two-phase micromechanical model .

离心铸造Al-Si-Ti合金梯度功能材料的摩擦学特性

Tribological Properties of Centrifugally Cast Al-Si-Ti Alloy as Functional Gradient Material

TiC-Ni梯度功能材料的优化设计

Optimum design of TiC-Ni functionally graded materials

采用爆炸固结加自蔓延高温合成（SHS）法制备了Ti／Al2O3梯度功能材料（FGM），并对所制备的FGM的成分、组织和性能进行了研究。

Ti / Al 2O 3 functional gradient materials ( FGM ) were prepared using explosive compaction plus SHS method . The microstructure , composition and properties of the prepared FGM were investigated .

采用热压烧结（HP）技术制备了界面结合紧密、结构完整的Ti/Al2O3梯度功能材料，并分别在1000℃、600℃温差下对其抗热冲击及抗热疲劳性能进行了研究。

The close-knit interface and full structure of Ti / Al_2O_3 functionally graded materials ( FGM ) were obtained by hot pressing sintering method , its thermal shock resistance was studied under the temperature difference 1 ? 000 ? ℃ and 600 ?

把梯度功能材料（FGM）的设计思想用于金属基复合材料（MMCs）的开发之中，成功地制备出了SiC颗粒增强铝合金基梯度复合材料。

The design idea of Functionally Gradient Materials ( FGM ) is adopted to develop Metal Matrix Composites ( MMCs ) and the aluminum alloy matrix gradient composites reinforced with SiC particles are fabricated successfully .

等效抗弯刚度的提出为高承载FGM等热应力缓和以外的梯度功能材料的组成分布和结构设计提供了一条新途径。

The introduction of the equivalent flexural rigidity provides a new approach for the compositional distribution and structure design of FGMs beyond thermal stress relaxing type such as high high load - bearing capacity FGMs .

梯度功能材料（FGM）是组分和性能呈连续变化的先进材料，FGM的制备方法与性能评价对其优化设计具有重要意义。

Functionally graded material ( FGM ) is one of the advanced materials because its composition and structure show a continuous change . The fabrication and performance evaluation of FGM are more important for the optimum design .

应用电子探针（EPMA）、扫描电镜（SEM）和能谱仪（EDS）对共沉降法制备的Mo-Ti梯度功能材料的化学成分分布、显微组织和断口形貌进行了研究。

Chemical distribution , microstructures and fractography of Mo-Ti gradient functional materials prepared by co-sedimentation are studied with electron probe microscopic analysis ( EPMA ), scanning electron microscopy ( SEM ) and energy-dispersive spectrometry ( EDS ) .